Systems

Hi together, just as an information for other pilots. If you have installed the Dirty Livery Pack from Dreamscenery then I highly recommend deinstalling it as it seems to interfere with the A310. As a result of this livery package you will the yourself with an animated Captain and a Copilot in the seats and all switches are not clickable. Iam running on Xbox, but I have seen a post on the official MSFS forum for PC as well. Best regards, Felix

Hello everyone I have a new problem. After updating the enhanced package to the latest version via the content manager, My fireloop tests ( both engine and APU ) doesn't make any sounds at all. I'm not sure if the sound files are broken during download or something. After investigating the issue, I found out that the issue is not related to the fire loop but It's an issue with the Loud speakers and the logic they work! See, the FWC generates and sends Aural Warnings sounds and chimes to loud speakers. Infact, the issue is the loud speakers only chime when at least one battery switch is ON. Tonight I had one A310 arriving and staying in airport for daily check. So I …

**No Mods or livery are installed** The IRS even if Align Mode is "Instant" will remain in Align Mode Forever. Because of that IRS problem Pitch Trim 1 + 2 Fault and impossible to get Pitch Trim 1 or 2 ON. Also in Microsoft Content Manager Version of the A310 is 1.1.7 On the EFB V 1.1.6 is shown -Removed & Re-installed the 2 A310 in Microsoft Content Manager and still not working. Before this update I had the same problem. Any ideas? tx

Hello iniBuilds Team, First off, Happy New Year to all! I have encountered several waypoints (fixes, mostly, not VORs or NDBs) that produce the "Waypoint not in database" error when inputting them into the FMGC. I usually input all my waypoints manually from the SimBrief generated flight plan. Navigraph have confirmed that their database is complete, as the waypoints appear when using other MSFS aircraft (A320NEO and the TBM930, for example). Is this a known issue with the A310, or is there a workaround that can be applied to have these "missing" waypoints how up on the FMGC flight plan page? Thank you, Mark

Hi, I saw several threads in the forum stating that fuel consumption seems wrong. What I want to report is that the fuel flow continues to increase even during the descent and also when at the gate with engines at idle. I did a LIRF/EFHK using the simbrief profile found on the forum here (and I didn't pause the simulation): during cruise, fuel flow was about 9500 lbs/hr against the 8700 given by Simbref, at TOD it reached 10200 lbs/hr and at the gate is 12600 and it is still increasing while I'm writing this post (now 12900 lbs/hr)...

I have seen some videos of P-DES which than displays a V-DEV scale on the NAV display. I have tried several P-DES descend flights but can never see a V-DEV scale appearing? Note: I get the ILS/LOC scales on an ILS approach - no problem. Thanks for Info Juergen Mader

Hello, I've noticed when trying to enter wind info in the FMS you cannot just click on F-PLN then Next Page and start adding, you have to enter into each point by clicking on the right hand side then click Next Page before its possible. Also noticed clicking on the Return line does not work.

I have been flying the A310 for several weeks and thoroughly enjoy the model. I have encountered a problem with the takeoff performance calculator, however. Although I carefully enter all the values necessary to perform the calculation of my V speeds and flex temperature and the calculate button appears to light up, nothing happens when I click that button. Any suggestions as to what I might be doing wrong or a fix if I've got it right?

Need some help. When trying to startup the engines, I am not able to turn the ignition selector to any direction. It immediately turns back to position zero. Is this a known issue? Any solution available? Tried already to deinstall and reinstall, no effect. Had a complete reinstall of MSFS two weeks ago because of PC upgrades, previously it worked quite well Thanks for some feedback, Markus

When we first see previews the streamer(s) click on the ACARS > SIMBRIEF and (poof!) it works - but not upon release. So I then use the iniManager (which worked well) and now even THAT doesn't work? I'm glad I have the XP versions of the aircraft. Will we be realizing the original desire of integration as originally shown anytime soon? John / KPSP

Hi there, I wanted to ask whether the FMS-assisted step climb functionality is fully implemented in the MSFS version. Because I have not been able to get it to work. Several times now I have set up the step climb as described in this video: https://www.youtube.com/watch?v=TQgv0VZAKGM&list=PLzeFYXw62MgZTxwGc-ogOuIlx8o5HdsK3&index=2 - of course the video refers to the X-Plane version of the A310, but behavior of the FMC is as described, and the S/C point is also shown on the ND. When approaching the S/C point, the FMA "P.Climb" even starts to blink in blue under "P.Alt". So everything as expected so far. However, once the aircraft reaches the S/C point, in…

How can i see the actual number of up or down trim setting while i am setting it via the wheel? It just turns but there is no indication anywhere of what the actual current value is.

Hi, (Iam on XBoxX) after landing I taxi to the gate, turn on the APU shut down the engines and then would instantly like to prepare for the next flight (without exiting). So I do refueling through the EFB , new flight plan through simbrief and start from the beginning. This will result in 100% CTD. I did now 10 tests and it always crashes to the XBoxX main menu, mostly during taxi. You can actually accelerate the CTD by changing views (in the cockpit left/right etc....). It only happens with the A310. No problems with other aircrafts doing this. Maybe that is something to look into the future. Not a major thing, since you can always start a new flight via the…

Hello! Brilliant aircraft. I am absolutely loving it and completed my first flight in it last night. Thank you for bringing it to MSFS! Has integration with the Logitech radio panel hardware been tested? In most aircraft, the panel comes alive and is operable whenever avionics or equivalent are powered/active (typically whenever the com and nav radios themselves become selectable in the in-sim cockpit). I have yet to get the panel to come alive when using the A310. Is there a background master avionics key binding that I need to switch to feed this integration that wouldn’t otherwise be activated through the switches and procedure flows?

Hi there, I’ve been trying now for over 2 days to get the throttle calibration right for the TCA captain airbus X but haven’t been able to get it right. can you please help with sensitivity settings and calibration. Thank you

Hello, Will the EFB eventually have the option for calculating landing performance as it did in X-Plane 11? This would be very much appreciated. Brgds

Hi, I'm enjoying your Scenery NZQN. The only thing that bugs me is the fact that you can not get the weather shown up on the EFB (A310) for NZQN. I have tried now for multiple days. I also realized that there seems to be no Metar support on the internet for that Airport , which kinda explains it. I also have the impression, that the Live weather is also not correct at all, comparing it to for example windy.com. BTW, Iam on Xbox. Do you have the same issues? Best regards, Felix

Olá. O tráfego aéreo e os radares terrestres poderão retornar ao A310 em algum momento?

Hi all, got pushed back out of Dublin today, only for the aircraft not to turn in any direction so I could get to the runway. is this a known bug? A310

Hi all, today I entered my fuel from my simbrief flight plan. Upon take off the aircraft rocked backwards and forwards. I tried again but the same thing happened. when I used the default 43.3 block weight all was ok again. Is this a bug ?

Hi all. I would like to know why in Russia there are no METAR reports in inibuilds a310 iPad? Although METAR works in this country. Also, realistic weather in the simulator itself also works. Thanks for the answer.

Hello, my first post here. I looked at this post in FAQ https://forum.inibuilds.com/topic/5977-some-key-hardware-vars/ However, I tried setting autopilot speed and altitude using the events indicated (AP_SPD_VAR_INC and DEC, AP_ALT_VAR_INC and DEC) using Mobiflight with my DIY autopilot panel, but they don't work at all, used as shown below (I get no response from the simulator): (>K:AP_SPD_VAR_INC) (>K:AP_SPD_VAR_DEC) (>K:AP_ALT_VAR_INC) (>K:AP_ALT_VAR_DEC) On the other hand, I am only able to set those by using the Lvars: 1 (>L:A310_AIRSPEED_DIAL_DN_COMMAND) 1 (>L:A310_AIRSPEED_DIAL_UP_COMMAND) 1 (>L:A310_ALTITUDE_DIAL_DN_COMMAN…

Good afternoon, I am not sure what I am doing wrong or not programming in the MCDU but when I take off and activate TOGA, the aircraft does not revert back to CL mode.. the autothrottles are stuck in TOGA until TOD. Is this normal for the aircraft or am I missing something during the pre-flight? Thank you!

I tried using SimBrief integration through the FMS/ACARS menu yesterday and all I got was a quick flash on the FMC display. I did update the iniManager to the latest version (don't recall the number). I assume there has been no resolution to this yet and I accept it for what it is. At the same time, it is rather disheartening to see others just click-n-go on their videos and/or streams and I can't even load a flightplan thru the iniManager let alone the FMS integration. Trying to stay positive, I hope there is able to be a resolution soon; however, I also realize in this world there are much bigger fish to fry in the meantime.

Has anyone got the script for the elevator trim switches on the captain's yoke? I am positive I am doing it wrong, but apparently lack the brains to figure out the right way. For Axis and Ohs.