iniKyle

Hi, Sorry to hear you’re having issues with v1.0.4. I just wanted to confirm that you’re on the SEC flight plan page when attempting to import your flight plan. The flight plan will not import if you’re on the ACT flight plan page. In the meantime, if you’re able to, I’d suggest joining the Synaptic Discord, where they may be able to provide further assistance and troubleshooting. Thanks!

Hi, I don’t own the Bravo Throttle, so unfortunately, I’m unable to test this on my own sim setup. If you’re still experiencing issues, I’d recommend joining the Synaptic Discord, where they may be able to provide further support and troubleshooting suggestions to help get everything working correctly. Thanks!

Hi, I can confirm that Synaptic is actively aware of the issue with the simvars not being set correctly, and we’re hopeful that a fix will be included in one of the upcoming updates. Thanks for your patience and understanding!

Hi, v1.0.4 has just been released. Could I suggest performing a fresh installation of the aircraft to see if this resolves the issue? If the issue persists after reinstalling, please update this thread and I’ll pass the information along to the Synaptic team for further investigation. Thanks!

Hi, The Airbus A220 does not have a physical pitch trim wheel in the cockpit. Instead, pitch trim is controlled by electric rocker switches located directly ontop of each sidestick. You will need to bind pitch trim up/pitch trim down in your simulator to a specific keybind of your choice. Hope this helps. Thanks!

Hi, As mentioned above, Synaptic has identified some issues with parsing the coding, which appears to be causing both the ILS auto-tuning issues and the RNAV-to-ILS tuning issue when using the sim’s default NAVDATA. I can assure you that the team is aware of the issue and is actively working on a fix. Thank you for your patience and understanding while we work toward a resolution.

Hi, Sorry to hear that you’re also experiencing similar issues to the OP. Have you had a chance to reach out to the Synaptic team directly to report the issue? They may be able to provide further assistance and troubleshooting. Thanks!

Hi, I haven’t personally encountered this issue, nor have I heard of anyone else experiencing it. If you’re able to, I’d recommend joining the Synaptic Discord, where they may be able to provide additional information or troubleshooting tips. Thanks!

Hi, Sorry to hear you’re experiencing issues with the A220’s RA callouts. I’ve completed numerous flights on v1.0.3 and haven’t encountered any issues on my end. If you’re able to, I’d recommend joining the Synaptic Discord, where the team may be able to provide more direct troubleshooting and support. Thanks!

Very good news, I agree! Stay tuned to our usual social channels for more info, hopefully soon. Thanks!

Hi, Sorry if I’m not quite understanding the issue. Could you clarify exactly what isn’t working? When you load into the aircraft for the first time, it should compile a WASM folder as part of the initial setup. Is the aircraft itself not functioning correctly, or are you experiencing an issue specifically with the WASM folder/compilation? Thanks!

Hi, We’re glad to hear you’re enjoying our rendition of EGCC! I’ve made a note of the issue you’re experiencing and will pass it along to the team for further investigation. I personally don’t use any traffic injectors, so my experience and knowledge in that area are somewhat limited. Thanks again for bringing this to our attention!

Hi, Sorry to hear you’re having issues with the A350. I noticed you posted in another thread where someone mentioned a potential “fix” for the issue. Were you able to try this method to see if it resolves the problem? Thanks!

Thank you. I've logged your issue with the team for further investigation.

Bonjour, Malheureusement, je ne parviens pas à reproduire ces problèmes sur mon système. Je pense que cela est lié à la taille de l'aéroport ou de la scène dont vous décollez ou vers lequel vous atterrissez. Merci !

Hi, That’s okay! Is the aircraft now working as intended after the reinstall? Thanks!

Hi, Firstly, thank you for the kind words! We’re pleased to hear that you’re enjoying your time with the A320neo. Regarding a potential “paid” upgrade to the A320neo, I don’t believe this is currently part of our future development plans. The aircraft was originally developed as a contracted build for Microsoft. That said, I’ll make a note of your suggestion and pass it along to the team for consideration. However, I wouldn’t want to set the expectation that a paid upgrade is something we are currently planning. Thanks again!

Hi, Thank you for your feedback and for the attached photo. I can confirm that I’m experiencing the same “dip” in the taxiways on my end. I’ll make a note of this and pass it along to the team for further investigation. Thanks again!

Hi, Thank you for your suggestion. I’ll be sure to pass it along to the team for consideration in future updates. Thanks again!

Hi, I’ve just loaded into KDFW and I’m not seeing any missing textures on my end. Could I suggest a troubleshooting step that may help resolve the issue? Thanks! https://forum.inibuilds.com/topic/22062-my-scenery-is-not-showing-even-though-it-shows-as-installed-in-content-manager/

Hi, Thank you for the detailed report. I’ve just tested this in the simulator and can confirm that I’m experiencing the same error. I’ll pass this along to the team for further investigation. Thanks!

Hi Steve, We're glad you're enjoying the aircraft! According to Asobo, improvements to Career Mode are a priority for 2026. Currently, only aircraft available through the official Marketplace can be validated for Career Mode. This is because the Marketplace integration process is how Asobo verifies an aircraft’s compatibility with Career Mode missions and certification requirements. Thanks!

Hi, Thank you for the kind words! We’re glad to hear you’re enjoying the aircraft. I’ve logged this with the team for further investigation. Off the top of my head, I’m wondering if this could be related to a NAVDATA issue, although I can’t say for certain at this time. Thanks!

Hi, I don’t own an Xbox myself, so I’m unable to test this directly. However, I’ll pass this along to a team member who does and ask them to look into it. Thank you for your patience while we work to verify the issue.

Hi, To print mailbox (CPDLC/ATC) messages in the iniBuilds A350, navigate to the Mailbox or ATC Communications page on the display. Select the specific message you’d like to print, then press the on-screen PRINT prompt. The message should then generate as a physical printout in the cockpit and be attached to your clipboard. Thanks!