Other

When loading a saved situation (specifically on the runway ready for takeoff), the aircraft spawns on the runway on its tail pitching up. ECAM TAIL STRIKE appears. I am able to place the aircraft properly with SLEW function, but the ECAM remains, unable to reset it.

The MSFS Marketplace is a nightmare. The update functions don't work properly. There are two ways to update the A380 without issues, depending on whether you have it installed or are streaming it: 1. If it is being streamed, completely deactivate and then reactivate it. You can find the options for this in the bottom-right corner of the Marketplace after selecting the add-on. 2. If it is installed, please uninstall it completely; then, place the aircraft somewhere using the streamed version before downloading and installing it again. As long as the aircraft isn't managed via the iniManager, there are no local WASM files, because they are precompiled for consoles. Conseque…

Hi ini devs tried for the last 4 hours to download it but keep getting this failure. streaming is fine but wont let me download, ive selected another aircraft in free flight but still no luck. any suggestions?

I think the title is self explanatory. Has anyone else experiencing this? During take off roll everything runs smoothly til about V1. Then there are massive stutters during rotation and in the air until about 200-400 ft above ground.

Hi everyone, I just wanted to let you know that the beacon/strobe sequence sync is broken again on v.1.0.5. Timing between beacon and strobe flashes is again determined by when you turn on the respective lights. Thanks for checking!

Bought the A380 today and have been trying to fly from Heathrow (Inibuilds scenery). Spent all morning trying to get the jetways to move. Tried everything: multijetway tool, GSX jetway operation, EFB jetway operation, changing stands, etc. Reinstalled everything I could think of at least once. Stand 563 for most of the testing, if anyone cares. Ini A359 has no issues at the same stand. Jetways move as expected. So seems to be something with A380. Help! :)

Hi, When I try to update the IniBuilds A380 on MSFS 2024 Marketplace from 1.0.3 to 1.0.4 it goes into disabled and in red says Installation failed. Even after a uninstall and reinstall it says same thing. What do I do now?

Hi Inibuilds, In your showcase video you present the A380 on a par with A350 performance. I have Performance mode active and FX performance enabled... it's very stuttery at landing and take-off at busy hubs. Ok, I understand it might be, but with the A350 its always very smooth... so, I don't get it, this is the only plane I have issues with. WASM cleared, shaders, scenery indexes... the lot. Issue persists but only with the A380. My system: AMD 7800X3D, RTX5080, 64GB DDR5 RAM, I use BATC at default settings for traffic, but as I said above this only happens with the A380 with the rest I get constant 80FPS regardless of scenery (thats with FG, so 40 real frames capped).

Ini Team update 1.0.4 lists this feature has been added i cant find a way to walk around the cabin please tell me how? walkaround mode still spawns on the ground thank you

I am eyeing on the plane for long, but the MS store is full of issues and difficult to fix, any chance it will eventually lands in the ini store so I can have it in a normal community folder?

Hi all, Upon updating the a380 to 1.0.3 and following these steps: Uninstall the plane Uninstall the liveries Go to free flight and select any plane that isn't the A380 (no need to then go into a flight or anything, but just have selected another plane and then clicked save & back) Go to settings > online > set rolling cache to 1GB (results in the game prompting you that it will clear the cache) Once done, reset the cache to your chosen amount (I've done 64GB - no science behind that choice) Install the plane Install the liveries I now have instant WASM orange screens when loading into the sim. I've tried exiting the game, power-cycling the xbox (including leavi…

Hi, I’ve been trying for an hour to update and download the A380 from the MSFS Store, but the installation keeps failing – I’ve tried five times now, restarting each time. What’s going on? When will it be available in the INI Store?

I am experiencing a persistent cockpit interaction problem with the iniBuilds A380 in MSFS 2024 when flying in VR. During use, all of the cockpit interaction points illuminate blue and become highlighted simultaneously. All lights are illuminated for every switch/setting. At the same time, I lose the ability to operate cockpit controls using the mouse. Moving the mouse does not restore normal interaction and I am unable to click switches, buttons, displays, or other cockpit controls. Reverting to a previously saved auto-save point temporarily removes the problem but it reappears again within 5-10 minutes of flying. I also experience a floating knob in the pilot's main win…

Hi, I run the A380 in streamed Mode. Library in Marketplace Shows me 1.03. EFB shows version 1.01. What is the Version I‘m running? Thanks Andreas

This is probably just majority of the sim being a pain in the ass although is there anyway to fix performance degradation in this aircraft, I experience it in the 3 flights I have done so far, using jump ahead and not time compression (very handy feature by the way) I'm currently doing KDFW-YSSY which will be my first full long haul I have done in the sim for once. And so far I've been flying for 7 hours and 37 minutes Atleast in this point of time I am getting about 25-30 FPS, yes still playable however I should be getting far more FPS and it'd be hard to pinpoint whether this degradation is a result of something the a380 is doing or it's just the sim being awful

The contrails move straight back for a few hundred meters, then curve according to the wind... Why hasn't this been noticed? This issue has also occurred on other iniBuilds aircraft and it's been documented.

Hi Inibuilds, after the update to version 1.03 I have orange screen (WASM crashes) in every single try to start a flight in cold and dark (I tried multiple liveries at multiple airports). The plane is not usable at all right now. It went from okay performance (1.0) to bad performance (1.01 - much more memory induced black screens then before) to no performance at all. Honestly, how is this even possible to miss such a critical issue? Did you test the version not even once on a real Xbox before pushing out the update? This needs to be addressed and fixed ASAP.

Hi all! Super excited for the a380 to come out on PS5 sometime over the coming weeks. Just a question: I can’t remember where I read it, but I read somewhere it will only release with the default IniBuilds livery and a white one. Can someone confirm this? And if true, can we expect some airline liveries to eventually become available? Cheers

The co-driver’s model is shown sitting in the wrong position, too far forward in the seat.

Severe stuttering during take-off and landing when the NVIDIA app is installed. Even though neither the MSFS 2024 game optimisation nor the overlays are enabled. If I uninstall the app, the stuttering during take-off and landing disappears. Once reinstalled, the stuttering returns. Tested in EDDF and OMDBV2 I’m only speaking for myself, as there shouldn’t actually be any connection. But is there a problem with the A380 and the NVIDIA app?

Hello ! Anyone knows if it's possible to assign a controller device, UP / DOWN, for the "wheel" as shown in the pic ? Thanks

Dear Ini Builds team the 380 is marvelous but can you please finish the stand alone installer. The marketplace loop is the most annoying thing and takes forever to fix. AARGH

Market place does show that I have an update available under my library, however after I select to install the update, it still shows as version 1.0 and its confirmed after loading the aircraft and checking the version number in the EFB. I've attempted to install the update 3 times with the same result to include a restart of the sim. Any timeline on when we can transfer the A380 to our iniMananger accounts to avoid the mess of a circus that is MSFS Market Place? Soon please!!!

When I switch views back and forth to the cockpit, all the cockpit button lights (red/green) come on and then flash and go back to normal after a second. Strange behavior. @iniBuilds

After exhaustive attempts to nail down the correct behaviours for this throttle, it is clear that there is a signal issue in MSFS 2024 from the Winctrl throttle with this V1.0.3 A380 selected in MSFS 2024. Multiple attempts, cleaning the throttle data config, setting axis to 0 to 100%, setting throttle axis as per forum instructions, following the forum instructions to the letter, 4 axis selection vs 2 axis selection, single stroke double shaft in simapp, re-calibrating in simapp, confirming Winctrl firmware is up to date, confirming simapp is up to date, and all points in between end in the same situation. When viewing the Current Axis Value in both throttle axis 0-100…