Modelling & Texturing

Hi there, I selected Performance Mode, and it generally works as expected. When the cockpit door is closed, everything works correctly when switching between the cockpit and wing views. When I open the cockpit door, I can also see the cabin from both views. The problem: When I switch to the external view, the cabin should be visible, but unfortunately, it is not. Even when I open the cockpit door, the cabin remains invisible from the outside. It seems that Performance Mode is incorrectly hiding the cabin in the external view, regardless of whether the cockpit door is open or closed. Is this a known issue, or is there a way to fix it? For now i just disabled and enabled th…

Noticed the A380 seat belt and mobile signs still seem to be on even during the day. In real life, when turned off you can't see them at all. The alignment seems also a little off too, should be more centred. Photos attached. Both turned off: Real life with mobile off (can't see outline like above, sign more centred):

Does anyone know the exact size I need to make my canvas to make a internal Reg plate I don't seem to have a file for it in the paint kit?

Hi Ini team I tried every combination of potential icing weather scenarios and was unable to achieve any visible icing effects what so ever. i got one very brief engine icing warning on the ecam which soon disappeared even though i did not turn on the engine icing switches on the over head, despite still being in icing conditions. Is this a bug and can you confirm that icing effects are modelled in to both the systems and the graphics side, ice build up on windows and other areas etc?. Im not talking about the separate ice and snow feature that can be independently selected in the efb and does show ice on the wings and fuse if i use the slider. thank you

The BA fleet paints are painted with the 'Long' canoe, when BA use the 'short' version.

Hi everyone, another small observation: On the rear cargo door frame there are several edges that have some substantial gaps between the outer skin and the inner paneling. Thanks for checking!

I have performance mode enabled, but the passenger cabin keeps popping up It doesn't matter whether I have the aircraft installed or streamed. MSFS24, Steam, Windows 11

The cabin is not displayed. BASIC is displayed correctly.

3 screenshots. The 3d Model of the Pilot Avatar is positioned forward of the seat (similar to how the Co-Pilot was before the patch). The 3D model of the Pilot Avatar is seated "into" the seat. This is causing the pilot figure too sit low in the cockpit visual model. Hope these screens help! :)

In the livery selection menu, the image of the Arsenal A6-EOE special livery shows the landing gear in the semi-retracted position, unlike the other liveries, which are shown with the landing gear in the normal position

Noticed a bug with the A380 cabin lighting. Upon initial load, the lighting doesn't work. The tablet says the lighting is set to Deep Blue and at 100% brightness, but it remains dark. It is only when you click the colour again, does it begin to work. This is also the same when launching at a gate, it says Deep Blue but you need to cycle again. Looks like on first load the lighting or shaders are not working properly. Videos attached demonstrating the issue. https://drive.google.com/file/d/12b9eyytiUZCUuVdH8c16AqZs1MHPYOgT/view?usp=sharing https://drive.google.com/file/d/1I_Myq7xkmxbEIaXz0h8AfYAv2dHzfvvb/view?usp=sharing

My A380 aircraft model and livery are both up‑to‑date, yet garbled text still appears.

as one of the changelog items says it fixed "A6-EOE under-wing reg incorrect", I can confirm it is still there after updating, (unless the new livery should release as an update on inimanager) which I checked multiple times and nothing has released yet. Also "No mobile" sign still does not illuminate in the cabin as I have mentioned already in a previous post. Many thanks for your amazing work and support as always. :)

Hi everyone, I'd like to thank you for taking care of all of our reports, the current visual state of the aircraft is close to perfection! ❤️ I've found two little spots on v1.0.3 that I'd like to pass on. The left inner flap canoe has some issues with duplicated and cutoff decals. This is across all liveries. The covers for the aileron actuators on both wings are clipping when drooped. Thanks for checking!

Hi, I've noticed that the left horizontal stabiliser seems have more dihedral angle than the right one, the following screenshot was taken after I moved the camera directly behind the tail of the aircraft, so we can rule out any distortion caused by perspective.

Do you have any plans to create airline-specific cabins for the Airbus A380? Thank You!

For the first time I noticed such a problem: after some time the cabin reappears behind a closed door when Performance Mode is turned on

Hello. I loaded up the Etihad paint last night to do a flight and noticed that the elevator and rudder were stuck into odd positions. The elevators showed full nose up deflection and the rudder full left. However they were simply cosmetic and the actual flight control page showed correct placement (neutral when not commanded to move). This persisted the entire flight and movement of the indicated surfaces did not seem to be visually showing anymore.

Hi Wondering if I'm missing something, but can't seem to locate anywhere within the paintkit any textures for doors - either standalone decals or within the Fuse Main. Do we have to manually create door outlines or is there something I'm missing? Thanks

Hey guys, Not sure what I'm doing wrong here but I've downloaded the A380 Paint kit and painted my livery and exported the ALBD files as required I tried to copy the British Airways Livery and found even when my new textures some items from the BA livery still show up after finding out these seems to be apart of the model file I've been trying to find the Base White A380 model files but so far no luck at all. When I use the SDK wizard the inbuilds A380 isn't showing at all for me every other aircraft I own and the defaults show fine its just this one that isn't. any help would be appreciated or even just a comment from someone at inibuilds to state they are aware of this …

Recording 2026-09-25 163810.mp4 Hello, little bug with the 3d model, one of the hose is not rotating with the wheels. Video for illustration.

Since now we have a 3rd-party mod that enables taxi cams for multiple addons already, is there a chance you can make the taxi cam button operational like the A350? ( also removing the inop sticker :) ) Many thanks.

Hello everyone, unfortunately I'm quite underwhelmed with the visual quality of the A380. It looks shiny from far away, but a closer look reveals a lot of flaws, sloppy work and lack of quality control. Here's a list of what I've encountered so far: Slats clip heavily into the engine pylons. Engine pylons are not flush with the wing Spoiler actuatory clip into flaps when extended during Flaps 0 There's a gap between the two MCP panels on both the Captain's and FO's side Main gear bay doors are heavily bugged in their animation logic, remaining partly open in flight 7. On the both RR and EA engines, the blades in the rear of what I believe is the N2 stage are con…