Other

Hi, Every time I shut down engines while in VR, the viewpoint shifts slightly backwards and up for some reason. Anyone know what’s causing this? Tom

I'm trying to update the A300-600 through the iniBuilds app, but it doesn't automatically update. When I click the update button, it says either; Session Logged Out or File Not Found Wondering if the servers are being polled to capacity.

On the takeoff performance page, the altimeter setting is always in hPa, even after changing it to inHg on the Settings page.

When I try to use GSX with the passenger variant of the A300, everything is mis-aligned and opening the wrong doors. I went into the GSX profile folder and there's only 1 file for the A300. I've attached a screenshot to show what I mean. GSX works fine with the freighter variant. I'm sure there's a simple fix, so if anyone could help it would be much appreciated! Thanks

Hi, is it the intension to have only 2 working and simulated passenger doors (1L and 1R) or am I missing something? Thx

Hello Devs, the Variable L:INI_FLEX_TEMPERATURE, Number is always 40 despite what is set in the VC. Please make it work to show the valid number. Would be nice to have them working on several hardware devices like StreamDeck etc. Many thanks!

Hi On my second flight with the A300 just at top of climb the plane stalled and just fell thorugh the sky, whatever I did to recover the stall nothing worked. The speed looked OK right before this happened. Have never seen this before with any other aircraft in MSFS... Any ideas? /Markus

I saw in another thread that the location to place flight plans is C:\Users\[user]\AppData\Roaming\Microsoft Flight Simulator\Packages\inibuilds-aircraft-a300-600\work\flightplans and the correct suffix is .fpl like LFKJLFLB.fpl. is this correct? and then once you save the flight plan there, how do you load it into the FMS? thanks

Hi all! Thanks iniBuilds for this amazing airplane and the rate in which you put updates out! Can I by any chance change the initial fuel value when loading into the airplane for the first time in a day? As long as there is no state save, I would like to set this to something more reasonable than 19t. All the flights I concluded so far end up with something more around 6t and this is what I would like to see when loading in. As it always falls back to 19t I guess there is a (config, ini, whatever) file somewhere were this value can be changed. Thanks in advance for your answers! Have a nice day NOS

When the spoilers are disabled by a hydraulic failure, or disabling the hyd system the rate of roll remains unchanged, it should roll much slower without spoilers.

Hi, I was hoping this would have been fixed in the most recent update but I have the "Rudder controls Tiller" option selected which works perfectly for taxiing, however when it comes to taking off the "Auto tiller disconnect" doesn't work and the rudders still control the tiller which ends up making me zig zag all over the runway!

As the title says - I put this at 1000 feet, but upon reload it goes back to 1500 feet.

After this latest update, the plane constantly crashes when trying to load a flight. For whatever reason, this will happen 2 or 3 times before it finally decides to load properly. This never happens with the 310, so it makes me wonder what is different here.

Hi! Noticed it on both versions of the A300 (V1.0.0 and 1.0.1 - worse on the latest version). Stutters last for 1-2 seconds and occur every 10-15 seconds. Noticeable sound from my hardware when it occurs and there is a dip in GPU load. Does not occur with any other third party plane. Community folder is almost empty and occurs both on the ground and in cruise. I've tried to amend/reduce settings but makes no difference. Normally doesn't occur at first load up but does by the time I arrive at a destination. Tested on both long haul and short haul which made no difference. Running a 4070ti, 5800X3D, 32GB ram, 1080p. Thanks

So I heard that the a300 was potentially going to be released to Xbox. Is that still the plan and how soon should we be expecting it?

Hi, can you please correct the camera positions for joystick hat switches left/right? It moves the views too much to the rear instead of just left/right. Thanks

Can anyone help or tell me the right setting? Normally my MSFS shows a flight log as soon as I have powered of all engines after a flight but with this a300-600 (passenger version) it won't do that even allthough I have powered of both engines as well as switched off the battery switches...

When I am flying long haul and have to move the aircraft.. Like with SIM RATE SELECTOR it freezes the sim and aircraft.... or with the MSFS "travel To" i find a plane in the are were I have to reload the FMC and switch on light etc.. But its possible to take control on the aircraft and land the plane as intended.

Hi, I just purchased a copy and it's great. However, I have difficulty in seeing the top of the Overhead Panel. I use TrackIR and I find it almost impossible to operate the IRS align switches unless I crick my neck to a crazy angle and then it's hit or miss operating the LH one. May I ask if there anything that can be done to make it easier to see the top of the panel? Best regards, Peter

I noticed if the winds are greater than 12 knots or so I cannot get a TO calculation on the EFB. Surely the A300 can handle more than a 12 knot crosswind.

Firstly, well done IniBuilds for getting a second update out in such a short amount of time. Unfortunately, despite the update, I still get a CTD with this aircraft. I hope this get resolved soon as I am yet to do a flight in it 😞 Just a note that I dont get this crash in any other aircraft and I have a lot of payware 3rd party aircraft installed. Faulting application name: FlightSimulator.exe, version: 1.35.21.0, time stamp: 0x656896c5 Faulting module name: FlightSimulator.exe, version: 1.35.21.0, time stamp: 0x656896c5 Exception code: 0xc0000005 Fault offset: 0x0000000000bd554d Faulting process ID: 0x33fc Faulting application start time: 0x01da4098c96100d8 …

Hi, The LVars INI_V1, INI_VR and INI_V2 seem to not be getting populated and are showing a 0 regardless of the V speeds set in the FMC. Am I missing something? Thanks

Hello! Loving the jet so far, but noticed that the emergency slides deploy whenever I toggle a service, like a jetway, etc. I've been resetting them from the maintenance page, but it kills some of the immersion. 🙂

Good day to all, ive been flying the A300 since release and have maintenance setting on realistic but theres never any wear after every flight, all fluids are still full, no tire wear. Is this normal? Ive done maybe 10 flights so far...

In the EFB settings the altimeter units never saves between sessions. I’ll switch to inHg at the start of a flight, and it’ll stay that way until I load out and back in to the plane. After that it’s back to hPa again