Other

The air start unit was reported to be coming with the PW variant here I can't find how to access it - does anybody have an idea?

Two things: IIRC wear and tear was supposed to be per plane type, but from what I can tell the W&T value is shared among plane types. That is, after flying the PW freighter I loaded the GE model and saw the values were the same. Any way to change this? Just to confirm, is the wear and tear of the tires and brakes is just cosmetic, i.e, I could land with completely bald tires and shot brakes and nothing bad would happen?

On the latest version I noticed that every time I land A300, after touchdown it either bounces back into air or looses complete control. Take today for example - I was landing on KMEM runway 27 with literally no wind whatsoever and after touchdown, the airplane immediately swinged almost 180 degrees to right and comes to complete stop. It looked like it hit an obstruction or something but there was none on runway (Orbx KMEM scenery). In fact similar behaviour was noted at other airfields during landing. After a almost after every perfect landing - the airplane loses control - something is wrong somewhere. Any suggestions?

Hi, A couple of times I have encountered hydraulic failures randomly. I do have wear and tear set to realistic. But on this occasion I tried to reset the failures mid-flight as I couldn't be bothered with returning to my departure airport, but I couldn't do so. I then reluctantly landed back at my departure airport and shut the plane down and serviced the hydraulics hoping it would be cleared. I then restarted the engines and the faults were still present. Can Inibuilds advise if I can remove failures or at least cancel them? Thanks

Hi, Another 'bug' to report. I cannot disable the flight directors, it appears the click spot has been corrupted. Thanks

Hello there. One rather naiv Question. On YouTube i had seen Freight Loaders and Freight loading into the A300. But what Buttons toggle these actions? Did not find anything.

Since the latest update, after about 10 min. of flight, the engines and ecams shut off and the plane spirals out of control. There is nothing abnormal going on before this.

Hello, ini! I'd like to start this post by saying I'm not bashing and I truly hope this data can help in some way. I know that performance has come up in many different threads, but I wanted to provide solid examples and data points in the hope that they help. The test conditions were the A300RF and Fenix A320 at KATL runway 27R with clear skies and no traffic to remove as much skew as possible in testing. The test was a short sit in the cockpit to ensure I was ready for the takeoff, then a takeoff roll, followed by rotation, and climb to approximately 3000 agl. I compared it against the Fenix A320 because outside the ini lineup (ini A320, ini A310, and ini A300) the…

Hello Ini-Team, first of all congratulations for the A300. It‘s probably the best aircraft I‘ve ever flown on a PC-Simulation, especially when it comes to handflying. As this is a very complex aircraft, an FCOM ( or at least a detailed systems and SOP-Description ) is desperately required. The supplied „manual“ is somewhat measly. Thank‘s very much in advance and best regards, Toto

Was wondering if some could point me in the right direction...I am setting up my MIDI which acts as autopilot and various EFIS, etc. buttons. So far I have had good success but for some reason cannot seem to select the right Event/Lvar for the following FCU buttons...PROFILE...NAV...and the toggle switch from VOR/NAV/ILS. I do have the LVars list and been searching the internet for an answer but no luck to date and what I thought would work doesn't seem to work. So I am scratching my head for the right combination 🙂 appreciate any help and thanks very much BruceU

Hi! I have seen others reporting this, I wanted to know if there is any progress on figuring out what is causing this? In my case, if I go to the location "%APPDATA%\Microsoft Flight Simulator\Packages" and delete the folder "inibuilds-aircraft-a300-600", it has a better chance in loading the airplane, but it will still CTD sometimes. My system is AMD 5800X3D, Radeon 6800XT and 64GB 3600MHz ram. I tried to deactivate everything in the exe.xml file except FSUIPC, and I haven't been able to find a pattern on which airport or livery, or cargo vs pax version on the issue. Once it loads, it has been working fine with no issues after. No other airplane or addon is ca…

Hi everyone, I have the Thrustmaster Boeing yoke and throttles, I wanted to know how to best configure the reverses Thanks for the reply

Hello, since the SU15 I have taken the A300 but I encounter very poor performance. Low FPS, Stuttering is a shame. Before that it was really efficient. I have an i9 12900KF, RTX 4080. It is the only plane that has such low performance. I saw that other people encounter this same problem, I hope you will quickly find a solution, Thank you Kévin,

Hey Folks, after some flights i recognized some bugs on the newest Build. DHL Livery for the 300 Freighter (PW) had some issues. On external view no loaded cargo will show up (just on the PW Variant) No stairs are shown, when enabled via EFB (PW) Since 1.1.0 there is no Tire-Maintenance available. (GE and PW) Best Regards Maverick✈️

Every time i use the PW a300 pax the slide is deployed at door 1L. When i try to retract or clear it nothing happens..... Maybe i do something wrong or i just forget something? Is there anyone who has a fix for it? I have the latest sim and plane update....i`m on pc Thanks in advance

Hello all, I'm new to this forum and I'd like to ask if this forum is supposed to be a peer to peer forum only, or if the developer is reading threads in this forum as well. Put in other words: where to report observations/bugs/etc to the developer. In this forum or via a support ticket? Thank you and best regards, Toto

I've had a recurring problem with the A300-600RF(PC version) where I receive ATIS broadcasts near certain airports, regardless of how my radio is tuned... and I can't turn it off. I've noticed the problem at a few different airports, but recently and repeatedly IVO KSTL & KJFK. No matter which frequency I tune the radio to, I can't get rid of the annoying broadcast. I tried to pull the radio breakers, with no luck. I even tried to "auto tune" through the ATC menus but that did not yield any results. Has anyone else noticed this?

Hey, im trying to set all my hardware as i require, and im having a lot of difficulty finding the relevant LVAR for each item. Some i have managed, others im finding impossible. Event viewer is hit and miss if i can get it to show something happening. Seems to be multiple strings sent for some things. Just wondered, is there a list available of all the lvars along side a description. Main things are toga button, AT disconnect things like that. Im trying to build the entire profile outside of MSFS controls so as not to have to annoyingly set the profile every time i switch aircraft (the most annoying thing on MSFS)

Planes not showing up in aircraft selection in msfs 2020 They are in my community folder but when I load the simulator nothing is there. Any help please!

hi inibuilds, I tested the plane with the new 1.1.0 update and unfortunately I encountered the following problems: I can't load the flight plan from simbrief into the mcdu, the TOGA button doesn't work and the dhl livery has problems with the textures and shadows

Checked the avionics via the update information. Where is the transponder now located? Sorry for a probably an oversight?

Help. I purchased from Simarket and there are no installation instructions anywhere?? Please can someone help. Cannot find help anywhere.

Hi, get this ctd inflight, what it this can i do something ? Faulting application name: FlightSimulator.exe, version: 1.36.2.0, time stamp: 0x65a6e79d Faulting module name: m82e27c8fdda060b5_0.dll, version: 0.0.0.0, time stamp: 0x660a5533 Exception code: 0xc0000005 Fault offset: 0x0000000000eaa104 Faulting process id: 0x0x270C Faulting application start time: 0x0x1DA83FD0F90AECA Faulting application path: E:\SteamLibrary\steamapps\common\MicrosoftFlightSimulator\FlightSimulator.exe Faulting module path: C:\Users\Simon\AppData\Roaming\Microsoft Flight Simulator\packages\inibuilds-aircraft-a300-600\m82e27c8fdda060b5_0.dll Report Id: 40a0050a-0853…

Screenshot 1 shows that even with all lights on, the landing and TO lights emit no light Screenshot 2 shows weird lighting for landing lights (clean circle of white) Any ideas here? Thanks

Hi Inibuilds Team! First of all, great job with the plane, because except for this issue, I really love the plane. However, the plane is an insane resource hog, especially when compared for example with the PMDG's 737, where I'm getting comfortable 50 FPS. But in the A300, I get 30 FPS and also stuttering, which is clearly visible even in the internal FPS counter. And the main reason is, that the Main Thread is getting absolutely destroyed. And I believe I have a hardware which is capable enough: Ryzen 7 7800X3D 32GB RAM RTX 3070Ti Because of this, it's not as enjoyable to fly as the other planes, and I would love to fly the A300 more. Al…