Systems

The combination of bumpy runways (ex: EFHK 22R, KJFK 31L...) and very high V-speeds (ie. 160+kts) sometimes causes the aircraft to momentarily "jump" and become airborne for a very short amount of time, during T/O roll. (if you forget to set DH to -5, you can hear the GPWS at that moment) When this happens, autothrottle switches off and engines go back to idle. Even if the hardware throttle are full forward. Note: behavior was also present on 1.02 build and maybe the previous ones too

During Climb/Cruise, switching anti-ice ON or OFF does not change the engine parameters - while it should. When turning ON A/I, either N1 should decrease, or N1 remains the same but FF, N2, EGT all increase to maintain the target N1 and compensate the power taken by bleed air.

Hi! No "Squib" light on 1 & 2. APU does work though. Could somebody pls cross check? Have a nice weekend, y´all

Hello, Both engine EGT's indicate 84C when starting a cold flight with a TAT of 15C and an ATIS OAT of 10C. This is at KPMD. The EGT indication system should indicate close to the OAT but will not indicate negative temps. Regards, John (A3001/A310 mechanic)

Hello guys .. I have a problem with my A300 .When i apply therust after i started them they shut off completely.. I have the Thrustmaster TCA CaptainX Airbus edition

As per title. pressing the TERR button does not show terrain on the ND.

where did the "Toggle Fuel" switch go on the EFB? I see it in a youtube tutorial video but not in my plane

Hello, During the FMC setup I changed the Fuel Reserve from 2.2 to 2.1. Once in flight, I checked the Fuel Pred page and I saw that the Fuel Reserve reverted to 2.2. I tried to set 2.1 again but when clicking the FMC Side Key the Sim Crashed as soon as I clicked. Only addons used/activated: A300, Pyrenees EGNX and Aerosoft EDDK. I was halfway from EGNX to EDDK...

How do you connect ground stairs to this bird for airports that don't have jetways?

Hi there, tiny EFB bug. In the settings the 'auto tiller disconnect' option isn't saved between sessions. Have to set it again to 'off' with every new flight/MSFS session.

Hi, When the landing gear is down, VLE indicating correctly at 270 knots on PFD but ECAM shows 250.... Regards

See screen Shot?

Since last update I can fill all INIT B fields automatically, except for the ZFWCG. I cant see this number on the performance page of the tablet, only MWCG. I just put in 30%, but is there a way to determine the realistic number?

Is it normal for the DH button switched on, to turn off the digits (three dashes) in the SPD/MACH display? Best!. Christian C./

The two little bugs on the oil quantity gauges take forever to move up and down, because once you start moving the scroll wheel over them the cursor loses focus and ends up zooming in or out the camera view. Some sort of better solution is needed.

When I attempt to takeoff, the plane always seems to turn sharply one direction or another, so I have to force the rudder the other direction to counteract it, even when I am still on the ground. Its as if the nose gear is trying to turn, even though there is no input telling it to do so. Its the same with landing, without any input, even if I land straight on, upon touchdown, it just veers to the left or right making it difficult to stay on the runway.

Hi, my first flight with the 1.0.3 patch and entering ZFWCG 27.9 into the FMS causes the left FMS go blank and the right FMS + FCU displays frozen. Any ideas?

During my flight i noticed that the fuel flow is wrong. The analog instrument isn´t showing the same fuel flow as the digital.

Hi! It doesn´t seem to recognize the airport the planes i currently situated? Is this now the A310 calculator where i have to input the TORA??? It also doesn´t seem tho want my simbrief ID. "unknown userid" regards

Hi all, I have a hardware MCDU from https://a320fcu.com and I am looking to get this working in the A300-600. Does anyone know how I can do this with Mobi flight? John

Good evening friends, greetings from Brazil, I have a question for you, how do I update the A300's airac? via nav data

I had zero issues before the update but today on my flight when I went to turn on the AP it just turns to the right and inverts the aircraft. The flight director points to the right but won't follow the flight path. The flight director seems to correct when I turn off Profile and Nav but when activating the autopilot it will still invert it.https://youtu.be/TPwvm8YJf3U

The overspeed pointer needle on the N2 gauges is stuck at the 0 position. I'm assuming this is a result of the new max indicator reset feature added. Please see attached photo.

Just finished a successful flight on v1.0.3 and during the shutdown checks, the EMER EXIT LT annunciator does not illuminate with the switch in the disarm position. Thanks, John (A300/A310 Mechanic)

Hey I selected the DAMEN5 [KSDF] STAR with DAAVE transition, no runway selected not executed. Then I wanted to look for another arrivals, so I deleted the transition, tried to go back in the STAR menu and this causes my cockpit to freeze. All screens are frozen, AP switches dont working, profile etc doesnt react on inputs. Otherwise the gear leaver and the overhead panel and also the weather radar section still working. Maybe you can reproduce this bug.