Fartherbranch55

I can also confirm that TOGA works fine achieving correct t/o power setting.

same issue here, on takeoff can hardly get airborne and almost stalling after rotate.

After updating to v 1.05, a CTD occurred, see event viewer log below. This always occurs after an update on subsequent loads it is loads fine. Any idea? Log: Faulting application name: FlightSimulator.exe, version: 1.36.2.0, time stamp: 0x00000000 Faulting module name: mf3055c24e74fe5af_0.dll, version: 0.0.0.0, time stamp: 0x65c04264 Exception code: 0xc0000005 Fault offset: 0x0000000000e14987 Faulting process ID: 0x0x81B0 Faulting application start time: 0x0x1DA57D4762CB2C0 Faulting application path: C:\Program Files\WindowsApps\Microsoft.FlightSimulator_1.36.2.0_x64__8wekyb3d8bbwe\FlightSimulator.exe Faulting module path: C:\Users\...\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalState\packages\inibuilds-aircraft-a300-600\mf3055c24e74fe5af_0.dll Report ID: b997e94b-2ac8-400f-ae9c-1b31eab94ae4 Faulting package full name: Microsoft.FlightSimulator_1.36.2.0_x64__8wekyb3d8bbwe Faulting package-relative application ID: App

Happy to report that the issue is solved. It was the rudder axis assigned to my CH Flightstick that caused it. Removing it solved the problem completely.

I will check to confirm, but did remove assigned rudder axis, so could have been still hardware related? I will check the Freighter version again to see if it still persists.

There is definately no other hardware involved and only happens on the freighter version. The passenger version is fine with no issues at all, so far!

It is impossible to use in this state as manual flying is almost impossible. So will wait for the next update, before attempting to fly it again. Hopefully, it will be fixed by then.

after a complete re-install I have a re-occuring issue with the aircraft banking to the left. I had the same issue previously but resolved with a complete re-install. It has now come back and the right aileron is in a constant right up to compensate for the left bank. It seems to be a bug that re-surfaces again with no resolve at this stage. Any ideas to overcome this would be greatly appreciated. See attached pictures for more detail. Rudder is in neutral position. This happens with auto tiller setting on and off. Also all assistance options are turned off.

Problem solved by uninstalling aircraft completely and re-installing everything including liveries. Issue solved

issue persists even after updating to 1.03, actually got worse. AP not following course and hard banking to the right until crash. This aircraft is unservicable in this state, very dissappointing indeed, all assists are turned off too.

i think i have a similar issue with lateral holding. Aircraft yaws to the left all the time and AP counters this with right aileron but makes manual flying very difficult in particular for take off and landing, see attached pics.ics for better detail of issues.

Are there any A300-600R XP12 liveries available or planned?