Support

Hello, The PMDG 737, the IniBuilds a300.... all dont function at KJFK on xbox. They keep going black screen and even crashing the game when loading in on the IniBuilds KJFK scenery on Xbox. I can't do a single flight to or start on KJFK because the aircraft screens go black every time. This is on Xbox. Could there be a patch?

Hi, there's a huge bump on runway 31R at JFK. As I was doing takeoff roll, it hot the bump and plane just flew off and crashed back down. Is there anything to fix it? Thanks!

Hello, I'm picking up this topic: I had the same issue. After installing KJFK using the ini-manager the scenery did not show up in MSFS. Also reinstalling it did not solve the issue. The content manager shows KJFK as "not installed". So I analysed the layout.json of the installation and found the following corruptions: - the layout.json does not contain any linebreak in difference to all other scenerie's layout.json. - an entry for ContentInfo/inibuilds-airport-kjfk-newyork/ContentHistory.json is missing. The layoutGenerator in the linked topic does a repair - a manual repair is also possible. Probably the installatio…

Hi I purchased JFK through the MSFS store. When will the update be pushed to there?

There are some pancaked buildings at JFK that looks like a visual glitch. Without knowing much about how the system works, would it not simply be possible to let the photogrammetry just continue towards the custom-made buildings you've made at JFK? I suspect the data is there underneath? Would look nice if the photogrammetry border would be set at the fence as an example.

So, after I installed this airport yesterday, MSFS has suddenly decided I need all of these mandatory updates. What happened is the following: Downloaded the iniBuilds JFK airport and enabled via Addons Linker. Uninstalled the stock Asobo JFK airport. After that, suddenly MSFS said I needed these mandatory updates and after I downloaded several gigabytes of them, I was told on the main screen there were essential updates I needed to add, even though my content manager shows no such updates needed and my game updated to the latest version. Long story short, I performed a clean reinstall of MSFS and everything looked to be back to normal, until about 30…

It looks like the signage on one of the jetways is partially cut off:

I downloaded the scenery this morning and enabled it through my mods manager and deleted the default one before starting a new flight, but the new scenery isn't showing.

Hello iniScene, good day! I've just discused the LDIN approach for KJFK's runways 13L/R with other PC pilots which told me that the LDINs within your scenery are hard to see - even at night. I was able to confirm this and remember that and remember from my review they have been brighter before. Maybe a simulator update has made them smaller or less brighter? Will it be possible to make the rabbit lights more visible (again) e.g. by making them bigger or brighter? Thanks so much - have a good day!s Bert

Hi I have flickering textures on the roof of these terminal Any solution? Thanks Carlos

Hi, I bought KJFK a while back but never got round to using the scenery. I loaded in using the new A300 yesterday, but I'm experiencing a weird problem where the FPS starts out fine, but quickly reduces to an unusable level after I start panning around the cockpit or going to external view. To further test this, I loaded in at a random gate (A27). At the start, the FPS tends to hover around 27-30. If I then pan the camera to face roughly towards the back of the aircraft, my GPU usage suddenly increases to 99% (from a relatively low percentage) and my FPS decreases to around 10-15. Sometimes it will stay at a reduced FPS …

I recently bought the John F Kennedy airport and im experiencing poor performance. Every time im on final, my avionics screen turns black making the approach more difficult. the rendering is pretty bad, when im taxing to the gate the airport appears right as im taxing in. i can only land into John F Kennedy, everytime i tried to load up my simbreif on the A310 or LVFR A319 my avionics screens turn black and eventually the game crashes. i want to know if there's anyway to fix this issue or will there be a update coming out for it? i enjoy the airport and i love landing into new york, i know the performance in the new york area is pretty bad but it would never crash for me…

I've noticed the airports poor performance seemed like it was continiously loading it's surroundings for roughly 5 minutes. With my 8700k @5.4ghz & RTX 2080 I've noticed something very odd, particulary the "Bus Interface Load" from my GPU seems to have an activity of 50% for 5 minutes when low fps occur at Inibuilds KJFK. It's only after these 5 minutes that Bus Interface Load stops and I finally reach the 45/55 fps I usually have at EGLL or KLAX from Inibuilds itself. So what's the reason KJFK loads assets for such a long time into the GPU? Is there some sort of loop or reiterating instruction that's not been spotted yet? Other details; Most options on scen…

Anyone have an idea where these text messages are coming from? I am parked at a gate @ Inibuilds JFK with GSX Pro. I have the GSX Jetways disabled for this airport though. Not sure what is displaying this message on the screen but see it at several airports. I also have the Nool AeroSystems and Aerosoft VDGS modules installed.

Hey! I'm not sure if this is MSFS related, Asobo 787 related or Inibuilds JFK related but figured I would report it anyway. So if I spawn up at the gate at JFK, I get about 60 fps in the sim and some minor stutters but nothing too bad. However, if I fly fro LGW to JFK in the 787 (approx 7,5 hours) my frames at JFK are severely degraded. On about 15DME it's all good, about 60fps. At final however where LODs from JFK loads in my fps decreases drastically to about 30fps, and by the time I arrive at my gate I could be down to 15 degrees and the stutters are massive. I'm not good at troubleshooting exactly what is draining my performance, but if I fly into FlyTampa Bo…

When flying into JFK for ILS22R it does not line you up with the runway. If I recall it is setting you up to land on "Y" taxiway.

Hello ini teams, I hope that the texture of the cargo terminal of Korean Air Cargo in JFK will be improved closer to the real world, and I also hope that ground handling or cargo loader and truck objects will be more abundant around places like Google 3D maps And the general aviation(Business) spot around the 13R runway is too different from the real JFK, so can you also that improve part in the future next update? (add car objects?)

Has anyone else run into an issue at JFK where the taxiway signs are so dim at night that they're basically illegible when you're on a flight deck? It's very strange, like the ground is lit up as it would be, but the signs themselves for me are not. TIA!

I purchased KJFK via MSFS marketplace and transferred it to Inibuilds app so i can use app settings. The Inibuilds KJFK file appearing in content manager I have installed but I have uninstalled Asobo file in MSFS - but i use Addon Linker to link Inibuilds KJFK file to my Community folder The animated train still runs if disabled in app and there are static people if disabled- i have a feeling some of other settings not being disabled in app Am I doing the correct actions listed above? Thankyou for your help

Hello, I noticed the interior lights at Terminal 8 Concourse C don't illuminate during dusk/dawn or night. Concourse B is fully illuminated. Not sure if this was just missed after the update. Thanks!

So since installing this new scenery, every flight I try crashes to desktop. and before someone askes, yes I uninstalled the default asobo handcrafted version, and also removed from gsx as well prior to flight. I will note that i was flying PMDG 738 but will also note that was first flight with the 800 since PMDG last update. Attempting again with MD80, if I don't get a crash with the mD80 I will update post.

Gibt es bereits Zeitpläne für die Implementierung von Nool VDGS?

Since updating to version 1.0.5, I fall through when I try to taxi on the bridges of taxiways A and B east of Terminal 8, crossing the JFK Expressway. The taxiway bridges A and B southwest of Terminal 8 (crossing the Van Wyck Expressway) work, although they are a bit bumpy. At least I assume that I am already in version 1.0.5, since the manifest file (as described here) still shows version 1.0.2 for me.

I'm just curious if this is an actual issue and the airport really was not updated or if someone simply neglected to update the manifest file? Its showing as version 1.0.2 in both the content manager and in the actual installation folder in the manifest file after I installed version 1.0.5.. I installed via the inimanager.