Support

Please find below list of steps to try if you are experiencing low performance at iniBuilds KJFK. 1. Remove Asobo JFK from the content manager. 2. Reduce your Terrain Level of Detail (LOD), go to: General Options - Graphics - and set Terrain Level Detail to less than 100. 3. Go to your Microsoft Flight Simulator settings: General Options - Data - (Scroll to the bottom of Data Page), and delete rolling cache. 4. Delete your Content.xml, and the contents of the SceneryCache and SceneryIndex folders. These are located in: PC: AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache Steam: C:\Users\YourUsername\Ap…

Please find attached a terminal guide for the scenery.

Hi. I flew out of gate 37 today and the jetway sign is cut off so you just see AM in the AMEX logo. The jetway is different than the others. I also noticed that the passengers legs stuck out from the bottom of the jetway. The GSX file had a entry for jetway floor height. So i was wondering if the scenery is wrong? I have asobo jfk diabled and scenery indexes reset. Regards

When on final at JFK on RW22L MSFS (2020) CTDs everytime whenever DX12beta is in use? I won't run the sim without DX12 and FG but JFK is unflyable because of this. Is there a fix that can be found anywhere for this issue? Thanks in Advance

Hello! I'll try to get pictures later if I can, but I've got a lower end system so I honestly switch all items to 'off' in the settings just to try to get the best overall performance. I loaded up the Fenix at A 47 and the interiors of the terminal don't show. They are completely 'hollow' inside when I use the drone camera. However, if I use the drone camera to move around the airport to look at the TWA area or other terminals and come back to gate A 47 where I'm still parked, the interiors completely draw in and are visible. No passengers are shown, etc., but I'm not sure if this is supposed to occur or if it only occurs because I'm moving the drone camera t…

most occur at runway thresholds.bumpy runway,What could be the cause of this?I see no one else reporting a similar issue

Aircraft PMDG 777-200ER

Hello - I purchased the JFK scenery for MSFS 2020 from SimMarket. I would like to upgrade and was hoping to either purchase the upgrade there or transfer my order to iniBuilds. Are either of those options possible? Thank you.

Hi guys, I initially bought the Inibuilds KJFK for MSFS 2020 through the Marketplace. Now that I'm only using MSFS 2024, I see in my content library that KJFK version 1.2.0 is available but marked as 'not creator approved'. Do I need to wait until the upgraded version reaches the 2024 Marketplace, or can I simply purchase the upgrade (for +£21.99*) via the Inibuilds installer and disable the Marketplace version? What is the recommended approach here?

Hi Inibuilds Team, I had to open a second version of my initial post regarding the purchase of KJFK for MSFS 2024, as the first was marked as closed. As mentioned, I bought the scenery in MSFS 2020 through the Marketplace. I was informed about the possibility of transferring the account to the Inibuilds app. I am currently in the process of transferring the purchase order; however, I am stuck with the requested information regarding the Invoice ID. I am not seeing this information directly in the Marketplace. How can I obtain this ID (see screenshot) for each product I bought? many thanks!

Any way to fix? Particularly the wide bodies and AA regional jets park elsewhere at the airport

Hi, really enjoy the scenery but am getting frequent disconnects of the autoland on the PMDG 737 approaching runway 22L. Everything is running fine, I have LAND3 and then about 2.5-3 miles out the ILS disconnects. Happened on 3 out of 4 flights using that runway. Don't believe it's happened on any other runway. Am I missing anything or is that an MSFS issue?

Hello, I have never had this issue before and searching through the forums I cant find a precise fix to it. For some reason now my JFK is showing installed in the ini manager but showing "uninstalled" in the content manager of MSFS. I have tried uninstalling and reinstalling multiple times but for some reason cannot get it to show in the game.

The north cargo parking area - where FedEx parks - is extremely dark at night. It needs a lot more lighting intensity.

The JFK I used to have on Xbox is not how it supposed to been before, like the tower is not modeled anymore, the terminals are not modeled anymore and the AirTrain tracks and terminals are broken and no Airtrains anymore, everything is just broken, Even the TWA Hotel is not modeled anymore, it’s all broken, can you tell me how to fix it because I am on Xbox and I tried many ways to restore it, like doing a factory reset, reinstalling the airport back, and so many other ways to fix it, but is not working to fix it even the signs are blurred off with the scenery. Please Inibuilds, can you reach back to me and send me screenshots of how to restore it back to normal because I…

Could it be that the xbox version is less detailed and has no inside?

Hello, when taxiing on A or B going to Terminal 8 from either direction there are scenery glitches on the bridges and it is very uneven and causes tail strikes. How do i fix this issue?

Bug report: On the Gate B14 of the Terminal 8, the gateway extends to its maximum but does not reach the door of aircraft and stops at around 10 feets. the aircraft is well on his yellow line

There is bug in the runways. I use Fshud and fshud and Ai doesn't recognicite runways correct. Ai planes entry in the runway example 22R wrong entry point and then go backtrack runway. Also FShud not recog when exit runway example 22L. It's give taxi clearance after crossing 22R. This is wonderfull scenery, but unfortunately it's useless until fix. Propably i can fix this myself using developer tools.

Hello! I took off from RWY 22R yesterday, which has a very long displaced threshold. I was using the default ATC. When I pulled up to the hold short point on taxiway E, there was no option to request takeoff clearance. I had to pull onto the runway and taxi all the way past the threshold before the sim recognized that I was near the runway and gave me the option to request takeoff clearance. I was flying the PMDG 777 at the time, and I noticed that the TORA displayed on the EFB performance calculator (which reads runway length data from the sim) was much shorter than the actual runway length—it corresponded roughly with the intersection with taxiway G, a fair ways pa…

There is a problem in that terminal that I can`t solve. Please, see the picture

The problem is similar to the Honolulu Scenery before it was fixed. The area as you can see in the Screenshot is responsible for a drop of the FPS what makes the scenery unusable in that area.

I am using FSHUD and FLSTL and for the most part the scenery behaves correctly when using AI traffic. But there are a few issues I am seeing. 1) When AI traffic enter the 22R runway they enter at taxiway G and backtrack to the runway lettering and uturn to take off. I am not sure why they would be entering here unless it was small GA plane. Regular commercial aircraft take off by C or YA maybe. 2) it seems that when crossing runway 22R and taking off 31R the trigger to let the MSFS know the planes is off 22R is not working. The strobe lights are still on and it locks the runway so other aircraft cant cross until it takes off on 31R. 3) When taking o…

Just purchased KJFK airport yesterday. I am experiencing random drops in FPS from around 110fps to 15fps about every 30 seconds or so. This happens even when in the cockpit, not moving or changing camera views. The drop is momentary, only lasting about a second in time. I have removed the Asobo JFK, turned off/deleted rolling cache, set my LOD to 100 and deleted my scenery cache and index files as recommended. Prior to installing KJFK, my frames typically run around 100-110fps. I have also turned of all of the optional settings in the inbuilds configuration for JFK. Any thoughts on what might be causing the momentary drops in FPS every 30 seconds or so?

Right now, with Beyond ATC, it will send you to the K intersection to take off from 31L, as the scenery data doesn't recognize the full length of the runway.