Other

I recently became aware of the upcoming A310 model for MSFS, and while it appears iniBuilds has plenty of A310/300 model experience, I figured I'd at least offer my assistance. I've flown the A310 (-200 and -300) and the A300-600F for around 11 years, and I'm currently flying the A300-600f as captain. If any assistance is needed in making the model as faithful as possible, I'd be happy to help (e.g., review the model, answer questions regarding aircraft behavior not found in the manuals, etc.) I know I'm late to the party, but it can't hurt to ask. cavok

Where can I get a system description manuals? Haseen.

Hi, my Honeycomb hardware doesn´t work with the A310. I can spawn on the Runway with running engines and ready for take off but the Yoke and Throttle levers doesn´t do anything with the A310. Already did the calibration in the EFB, but no success. The Honeycomb hardware works perfectly with all other planes in MSFS, it is not a general problem but a specific problem with the A310.

Microsoft Flight Simulator 2022.11.17 - 15.42.11_1.mp4 Hello, When using the reversers on the TCA, the throttles become erratic in the A310. Before you ask, yes I've manually edited the ThrottleConfiguration.ini file to fix the current Idle bug. I've tested in the Fenix and there I have no erratic movement. I'm not quite sure what might be causing this since I didn't have this issue couple of days ago 🤔

The nosewheel is turning left and right, but the plane goes straight. So I ca'n't taxi. Any solution? Thanks

Hi. Basic mapping to get up an running on the A310 on the Honeycomb Bravo - Is that published somewhere or can someone share theirs. Thanks

Hello, I really love this plane and started to try to map commands to my thrusmaster TCA quadrant full config with add-ons I already found how to map the engine X fuel injection commands : It is called SET ENGINE MASTER x My problem is that i try to find, in msfs commands list, where are located the commands for the 2 buttons to start the engine 1 and 2 (buttons located each side of the ignition knob). Any help very apppreciated !

Hello, I have the airbus + addon tca quadrant controllers, ALL of them worked very well on MFS2020.. after disconnections and reconnections (cleaning) and a badly positioned button.. I put everything back as it should, and since the addons are no longer recognized by MFS2020 !! (only the central controller) while in the windows config panel tca +addon are Ok !!!! I reinstalled the drivers, put on another USB port ... nothing helps!

When I go to simbrief requests my flight plan wont load in.

Is the 300 for MSFS trapping the freelook hold command? It works for all of my other aircraft. It is properly assigned in the camera controls

I can't turn the autopilot knobs with the mouse scroll wheel. When turning them, the markings on the autopilot increase a little or even decrease even when I turn it to one side. I thought it was my mouse problem. I tested it on other planes, with no problems. I changed the mouse and tested it on the A310 and the problem persists.

Hello all, when flying and usually when im on final approach, my 310 just shuts off, batteries self shut down and I lose everything, power, engines etc. It usually happens when I flip up the ILS toggle. Any ideas or fixes? Thanks

What does the A310 Enhancement Package in the msfs 2020 Marketplace provide?

How do we update the airrac NAVDATA for the 310? I am getting a NAV ACCURACY UPGRADE error in the scratchpad? Thanks

I made a short flight from VGJR to VGHS. In the STAR page, I selected ILS 14, and transition MIMAR. But after selection, I can not find the *INSERT prompt. Any help? Haseen.

Dear team, I am using a Honeycomb Alpha yoke and the standard bindings for lights like BCN, STROBE, NAV, LANDING, TAXI etc. do not work. Is there a solution for this?

HI it would appear that the HDG,SPD,ALT etc bugs cannot be used with the throttle quadrant and the aircraft,and the landing gear lever doesn't appear to work either Thanks Roy

I notice that when I try entering my Simbrief username the Sim CTDs The same happens when manually entering a flightplan when I enter FROM/TO (e.g LFTE/LSZH) Anyone else having that problem?

Hello After the current update all planes are in the hangar but not the A310. the installation went well and the plane is in the store but the A310 cannot be selected

Hi. Would appreciate some assistance regarding cost index value & OFP generated through simbrief(maybe dumb question and missing obvious, but i couldn't find anything useful in google myself). Oftentimes (like with A320, 737) simbrief calculates CI for you, so all you need is to take that value from the generated OFP and put it into FMS page. However, with the provided by iniBuilds simbrief aircraft profile, OFP returns Mach number instead, so logic mentioned above, as I see it, isn't applicable. How does one figure what CI value to put into INIT A page in this case? Thanks!

So i have been having this problem where whenever i want to actually use this a310, and i spawn in anywhere(mainly the runway), and i release the parking brake and add even the tiniest amount of throttle, the plane forces itself to turn about 140* to the left. i cannot counteract this movement, and even if i apply toga, the plane does not speed up. it just stays at about a measly 5 knots. I am NOT adding any rudder, yet this happens, and i even tried to do a cold and dark startup, but to no avail. 140* turns all the time, it is inevitable. Please see the video attached and it to see EXACTLY what is happening. (the plane also stops if i add parking brake, but it refuses to…

How does one update the NavData? The navigraph navdata centre doesnt pick up the A310? Ive updated the navdata for the sim but the aircraft still seems to be on cycle 2001?

hi I have continuous CTO during the manual creation of the flight plan, the moment I click LICJ / LICC the simulator crashes. I do not use and have never used navigraph or navdata. I checked content.xml and it is regular.

Hello Team, I really waited long for the A310 since I worked at the production Line of that one in Real Life, but unfortunately it crashes to Desktop right away. Here is precise what I did so far. I installed the Update yesterday without any Problems. Before doing the Update I cleared the community folder and the rolling cache although i don't have it active. I installed the Enhancement pack and tried to start from a runway, after about 75% of loading the sim crashes. So I started again at another Airport, the same. Today I installed the rest of the smaller updates for scenery etc. closed the Sim, started again choosed the A310, CTD after 75%. So I deleted the A…

Hey there! So, I made a new, fresh installation of MSFS through Steam client today, and I am unable to install A310. Marketplace shows me that I can get Enhanced version, but I don't have a basepack installed at all, so Enhanced will not work and can't be installed. Any help? 🙂 Thanks, PRedrag