Other

Msfs

I have this problem since this morning with the A310 when I turn on the engines, I have not touched anything in the settings, and I have that only with this aircraft. I'm not sure if anyone has had this problem, and I don't have the 3D Thermal activated in the weather. Thanks

While cruising, I tried to use the fast forward feature on the Xbox. It went ahead, however the whole setup changed completely. Autopilot was completely changed, aircraft started diving and eventually lost control. Is there a way to do this properly. I like to simulate longer heavy flight, but would like to skip through the cruise.

Is there a way to control the passenger cabin lights?

Hi, I'm missing the (A310) Fwd-Mid-Aft attendant call buttons on the overhead panel. Regards Jo va Bra

How do I enter the passenger cabin? I tried with the Cockpit Camera and flight deck door ULOCKED and OPEN, however I can NOT get into the cabin. Thanks for help Juergen

The reverse detent on the V1F yoke does not reverse the throttles correctly. I have tried the calibration many times.

Hello there, When the A310 came out on MSFS, I had spent a lot of time setting up macros in FSUIPC to control certain features from my hardware. Everything worked beautifully. Fast forward a few weeks, and now some of the LVARs appear to be gone. For example, A310_DOME_LIGHT_SWITCH, A310_RWY_TURNOFF_L/R_SWITCH or A310_TAXI_LIGHTS_SWITCH cannot be used anymore. Can we expect to have them back in the next batch of fixes? Cheers!

Hello, FYI I've noticed no matter the angle of the radar the return is always the same. Tks

I’ve been trying without success to get the weather radar working? Does it work? If so how? Thanks Craig

Hello, I tried to alter the flightlevel of a fix in the FMS, but it did not react to the input. It was on a flight to Vienna, there is the fix NERDU with an altitude constraint between 6000 and FL17000. The FMS showed 6000, i wanted to change in 12000 / FL120. I used the term "/12000" as well as "/FL120". I could not change it. There was no error message, the input was simply not accepted. The aircraft passed this fix at the high constraint border FL170. Am I missing something, did I do something wrong? Thanks in advance and best regards!

Guys, regarding the lights on the A310, you could leave them as they are on Leonardo's MD 82, I think the model of lights is perfect, it simulates exactly what a halogen lamp looks like

Shutdown engines by accident. Turned both backs off, maintained roughly 270 knots @15,000ft and began descent. Waited 30 seconds, kept masters off. Turned ignition to CONT RELIGHT (after starting APU and switching APU Bleed+both APU gens on) waited a few seconds then hit ENGINE MASTER #2 on. It seemed to sputter a bit-EGT went too high for a moment, then it caught and N2 speed came up to normal. Tried the EXACT same procedure for the number #1 engine but all that would happen is as soon as the #1 master on-EGT temp skyrockets with no rise in N1 speed. This continued for the remainder of the flight. After landing, at a full stop, the engine started norm…

Hi y'all, Just fired up MSFS and saw that there is an update including a major update of the A310. I was so happy, however it didn't last long. In the sim, the EFB still display version 1.1.6, the one that came couple of weeks ago. And I don't see any change in the sim, for exemple there is still the sound volume sliders, no METAR and the other update, etc. I've checked the folders in content manager and the regular A310 is 1.1.6 and the enhanced is 1.1.7 I've tried both with stock liveries and add-on liveries with the same result. Could you be kind to tell me what's wrong?

Hello, today -after a long time- I have started the MSFS in anticipation of the beautiful iniBuilds A310 with its new update. Unfortunately, after having set up the aircraft in the sim, I had to notice that something is wrong. I don't know how to describe this phenomenon with my lacking english, so I attached a screenshot. The green stripes move analogously to the flight phase, they disappear completely when the A310 is at a standstill and appear as soon as the plane starts moving. The intensity of the stripes and their movement increases with speed. Does anyone have a solution or can explain this to me? I have uninstalled and reinstalled the A310. Before…

Hi Guys, Whilst testing my MSFS for about 8 hours after SU11 just to eliminate the last couple of odd stutters, I observed that in the A310 and only during night time there is a consistent stutter (main thread load) every 10 seconds or so. i have tested this multiple times, nothing in community folder. Ultra Settings al the way down to low settings, stays the same. if you change the time to day, no issue, when changed to night time it immediately comes back. just thought it interesting and might help the developers. i am running 13600KF with RTX 2080, 2K Ultra Settings. My FPS is locked at 40

Just had the system freeze where nothing would work when I was entering a crossing restriction into the MCDU on the A310. I'm on the latest update.

Was looking for the aircraft.cfg file since on flylive it was showing up as TT:AIRCRAFT.UI_MODEL but couldnt find the aircraft.cfg file anywhere

Has anyone got a link for the 2 part video on the EFB referred to in the transcript of Episode 2 LEIB/LFMN as Neuter Airliners! I cannot find it on YouTube!

I have installed the patch 1.29.30.0 and updated the A310 via the content manager but unfortunately performance has improved by only around 2fps for me. Here is a video comparing it to other two demanding aircraft. As you can see I get around 10fps less in the A310 than in the Fenix A320 and PMDG 737. I remember the PMDG DC6 having a similar issue but can't remember if they fixed it. Could they be related? Maybe not. Anyway, I hope that optimizations can be found that work across the board. I can't wait to fly this plane regularly. Good luck.

Just popped outside view and noticed: 1. The rear facing white nav lights which look like floodlights on the ground seem to have an effective range of about 20 ft when airborne - same in external and drone cams - I see nothing from the rear until I move *real* close then they pop into existence. 2. I seem unable to see the tail logo light when airborne either - when I landed it was on - is that how it works IRL?

Hi - I wondered if there is an Lvar for the A/THR instinctive disc pushbuttons on the thrust levers? I can't seem to find one. I am using the var for the A/THR pushbutton on the FCU at the moment but I assume this is not the usual procedure... I notice these buttons are not modelled on the virtual cockpit so I wonder if that is why there is no var for it? Thanks, Rob

Is there a way to remove the default (Orbit, etc.) liveries on the PC??

Hello, in FAQ you mentioned AP functions are standard MSFS vars. I tried for example altitude/VS/speed, but they are not recognized in sim

Hello, I made two superb flights with this A310 plane, without any problem. I am currently at the FSDG Nairobi airport and cannot leave because it crashes every time. I have been trying to fix the problem for over two hours. I deleted the navigraph airacs to reinstall them, I don't use the airacs for MSFS directly, it creates too many problems. I removed the plane from the content and reinstalled, I also have the enhancement version. I restarted my PC and still the same problem.