IniJamir

Hi, Sorry for the inconvenience you seem to have run into with this aircraft. Whilst the Flyboy Sim RANS S6S Coyote II is sold on the Inibuilds store, ultimately the developmental decisions lie with Flyboy Simulations and as a result, we have no say over how and what the engine settings control or how much realism is controlled outright. These concerns would have to be brought up with the developer themselves but if the aircraft was built with this level of sophistication in mind with engine management, than that's just the way it was designed and we have no control here at Inibuilds. Thank you for understanding and once again sorry for the inability to directly assist your concerns.

Hi, Sorry for the delay on responding. I will raise this issue to the team, in the mean time however if you are still having the issue; You can log out of Navigraph and then log back in and that should update the AIRAC to the current cycle. Thank you.

Hi, Thank you so much for the suggestions, I will pass this along to the team for consideration.

Hello, sorry for the delayed response. This is being looked into but in the meantime some users have identified a fix that seems to have worked on their end, increasing their performance. Please bear in mind that user fixes might always work on a user per user basis. I have linked the comment on the subsequent thread and will lock this one so that we can consolidate the conversation over there in the meantime, thank you.

Hi, Thank you for this, I will pass this along to the team.

Hello, Unfortunately this is not something we are able to do due to the way Navigraph handles the tokens as well as when they choose for the authentication to refresh. Thanks for understanding.

A reinstall can help with WASM Crashes and other issues, when doing so make sure to clear the WASM folder as seen in the thread below to help mitigate more of these issues. Additionally we've created a Master Thread for any WASM Crashes you have to the relevant aircraft and simulator with instructions on how to properly upload and submit WASM Crashes to the Master Thread of necessity. Thank you and hopefully this aids you

Hi, I took a brief look around and when you say you are looking in the EFB, are you using the built in EFB in FS2024 or are you using the physical clipboard that is located in the aircraft itself. On that clipboard "EFB", you can then toggle the "Realism Switch" off for 5 seconds as instructed.

Additionally you can check in the content manager inside of the sim and double check that the A350 didn't get disabled as sometimes community content can become randomly disabled.

Could you attach a screenshot of the community folder with the directory visible so we can see the pathing on for the folder. Secondarily if you are using Sim Paths in the IniManager you can check in the Sim Paths section in the top left where your username is, click the name and select "Sim Paths", then Manage products and it should bring up a menu to enable and disable the products. I've attached a screenshot for clarity.

Thank you for these, I will pass this issue along to the team as well as moving this thread into the Svalbard Forum section.

Hey, this was really helpful as I now have a better understanding of the issue that is present. Thank you so much for providing these, I will raise this with the team.

Hello Capt James, ENSB Svalbard is also a hand-crafted scenery that is include with World Update V: Nordics. I know you said that you double checked the scenery database but I just want to verify that you "Disabled" the scenery in the My Library section. If you have done this already then could attach media of the dual vaults in sim as well as your content library showing ENSB from WU5 as disabled in the content manager, thank you.

Hi, I am currently loaded into KLAX Enhanced Edition with the POIs disabled in the IniManager whilst having the SamScene3D Vol.1 currently loaded and I am not getting a sandlot or the hybrid merge of the two SoFI Stadiums if you leave the POIs enabled. Did you check to make sure you are using an updated version of SS3D Vol.1 for FS2024 and not the original FS2020 version; as well as ensuring you are on an up to date version of KLAX Enhanced? I did not have to change any scenery load order in order to get the SS3D SoFI Stadium in, just disabled the POIs and everything worked as displayed below.

Hi, I looked into this issue with DTW in FS2024 and I was able to adjust the snow it is maximum density potentials in the weather tab and I was able to find that snow does accumulate on the runways and other hard surfaces do accumulate snow as seen below in the attached images. However as you did point out the grass areas and certain- -roads do remain without snow and this does come down to an established sim limitation in the thread below regarding LOWI and it's snow coverage:

Hi, I loaded up PHNL v1.2.2 and was able to confirm that the C and G Terminals are indeed suffering from an interesting lighting issue, I will raise this to the team, thank you!

Hello, regarding the bumpy runway; this has been reported to be the case as in real life and as such is a feature by design as the airport itself is inherently challenging to land on from being an all-ice runway to extreme wind conditions. See this thread here: As for the the airport being offset to the west, are you using the coordinates provided in this thread here: if not, it may be worth trying again with this information above; if you are using this information than would it be possible to gather media (preferably recordings or screenshots) with current versions of the scenery and Nav Data and upload them in this thread that way I can present it to the team? Thank you.

Inibuilds A350 Master WASM Crash Thread v1.2.1 FS2024 This thread will be the new location for all WASM Crashes relating to the Inibuilds A350-900/1000 for Microsoft Flight Simulator 2024 Below this message will be where users can upload their WASM Crashes pertaining to the current version of the A350. NOTES: If you do not see orange expectations screens on your displays or "WASM exception in X gauge" in the developer console it is not a WASM crash. The "sim-freeze" is a separate event that is tied to something on the server side which we are investigating with Asobo. All WASM Crashes existing in this thread will be removed following the release of a new update. i.e. Any Crashes identified in Inibuilds A350 v1.2.1 will be removed from the post following the release of v1.x.x and so forth. Please ensure that when posting WASM crashes you post the WASM log from the in-game console alongside any media (photo/video) and a brief description of what you were doing leading up to the crash. Instructions on what to do are located in this thread - Any posts not following this format are subject to deletion. Thank you

Hi, are you able to provide any real world media corresponding to the ramp areas that are visible in this screenshot from the simulator? If you can provide real world visual representation of the area provided whether it be videos that clearly display the gates in question as well as the bridges, I will be more than happy to pass this along to the developers, thank you.

Hi, thank you for the suggestion! I will pass this along to the developers.

Hello, Everett Paine Field (KPAE), was created by Drzewiecki Design and is available to be purchased on the Inibuilds Website/Manager however while our forums does have a section for sceneries made by other developers in this case this would be better taken up with the developers for this scenery directly. Any questions regarding development for sceneries made by other developers should be directed to their forums or their preferred points of contacts. Thank you.

Hi, You can request a license transfer from the Marketplace to the IniManager via the link below, thanks. https://forms.inibuilds.com/order-transfer

Inibuilds A300 Master WASM Crash Thread 1.1.6 FS2020 This thread will be the new location for all WASM Crashes relating to the Inibuilds A300-600R for Microsoft Flight Simulator 2020 Below this message will be where users can upload their WASM Crashes pertaining to the current version of the A300. NOTES: If you do not see orange expectations screens on your displays or "WASM exception in X gauge" in the developer console it is not a WASM crash. The "sim-freeze" is a separate event that is tied to something on the server side which we are investigating with Asobo. All WASM Crashes existing in this thread will be removed following the release of a new update. i.e. Any Crashes identified in Inibuilds A300 1.1.6 will be removed from the post following the release of 1.x.x and so forth. Please ensure that when posting WASM crashes you post the WASM log from the in-game console alongside any media (photo/video) and a brief description of what you were doing leading up to the crash. Instructions on what to do are located in this thread - Thank you.

Inibuilds A300 Compatible Edition Master WASM Crash Thread 1.1.5 FS2024 This thread will be the new location for all WASM Crashes relating to the Inibuilds A300-600R for Microsoft Flight Simulator 2024 Below this message will be where users can upload their WASM Crashes pertaining to the current version of the A300. NOTES: If you do not see orange expectations screens on your displays or "WASM exception in X gauge" in the developer console it is not a WASM crash. The "sim-freeze" is a separate event that is tied to something on the server side which we are investigating with Asobo. All WASM Crashes existing in this thread will be removed following the release of a new update. i.e. Any Crashes identified in Inibuilds A300 1.1.5 will be removed from the post following the release of 1.x.x and so forth. Please ensure that when posting WASM crashes you post the WASM log from the in-game console alongside any media (photo/video) and a brief description of what you were doing leading up to the crash. Instructions on what to do are located in this thread - Thank you.

Inibuilds A300 Master WASM Crash Thread 1.0.7 FS2024 This thread will be the new location for all WASM Crashes relating to the Inibuilds A300-600R for Microsoft Flight Simulator 2024 Below this message will be where users can upload their WASM Crashes pertaining to the current version of the A300. NOTES: If you do not see orange expectations screens on your displays or "WASM exception in X gauge" in the developer console it is not a WASM crash. The "sim-freeze" is a separate event that is tied to something on the server side which we are investigating with Asobo. Investigations will only be opened into WASM crashes once they have been confirmed to be reproduceable. All WASM Crashes existing in this thread will be removed following the release of a new update. i.e. Any Crashes identified in Inibuilds A300 1.0.7 will be removed from the post following the release of 1.x.x and so forth. Please ensure that when posting WASM crashes you post the WASM log from the in-game console alongside any media (photo/video) and a brief description of what you were doing leading up to the crash. Instructions on what to do are located in this thread - Thank you.