Systems

Inibuilds A300 Compatible Edition Master WASM Crash Thread 1.1.5 FS2024 This thread will be the new location for all WASM Crashes relating to the Inibuilds A300-600R for Microsoft Flight Simulator 2024 Below this message will be where users can upload their WASM Crashes pertaining to the current version of the A300. NOTES: If you do not see orange expectations screens on your displays or "WASM exception in X gauge" in the developer console it is not a WASM crash. The "sim-freeze" is a separate event that is tied to something on the server side which we are investigating with Asobo. All WASM Crashes existing in this thread will be removed …

Hello, Since last MSFS2024 update I have some difficulties to click on buttons and more specifically on overhead. I need to move the cam angle and zoom to be able to get the blue focus/highlight to be able to click and move the button/switch. It took me around 5min to be able to select pitch trim and yaw damper, that's annoying... Anybody else facing same issue ?

Dear support, I have configured my A300 Plane as shown in some tutorials, set PROFILE / NAV, FLEX and move my (Thrustmaster) Throttle to the Idle posiition, but when I press the "TOGA" Button on the left of the glareshield, nothing happens... I asked ChatCPT, but this doesn't help (claims that the TOGA button has not been implemented or that you have to press somewhere else, which is nonsense). To prevent any action from affecting TOGA, I deactivated the Thrustmaster and started it manually (N2 40%), but again: no TOGA). Before I continue searching (I haven't found anything in the FAQs or known bugs either), is this error known, or is there anything else I can t…

Hello, when I load into the aircraft, the switches just move without me doing something. Sadly, this bird is more useful in creating a song rn then virtual flying. I also have the premium version of it, but there I have the same clickspot issue someone else already reported. With kind regards, Ascara Microsoft Flight Simulator 2024 2026.mp4

Hi, when I load the aircraft into a gate or a runway (doesn't really matter), nothing in the cockpit (switches, buttons, knobs, flight controls) is working. The only thing that is working is the EFB. I have the version 1.1.6 installed which was released in May 2025. Can you help please? 🙂 Correction: the flight controls work, releasing the parking brake works, setting thrust works too, taking off is possible but nothing is the cockpit is animated or clickable

I have just purchased the A3000-6R. another great product, and I thank you for the massive amount of work that producing a piece of software that this involves. sadly i am unable to enjoy this aircraft as the ground handling appears to have a bug. the rudder rotates the nose wheel, and the tiller rotates the nose wheel , but the aircraft does not turn. this appears to be an intermitant fault. but I have been unable to complete a flight thus far. I saw a suggestion on here to use slew to move the aircraft, but this has no effect on the problem for me. I have tried it on the beta version of Fs24 and the standard version, same problem. Any advice …

Some bugs I have noted with the A300-600R(F) on MSFS 2024 Xbox (v1.1.6). 1. Performance is generally bad, but strangely enought spawning the aircraft cold and dark at a ramp results in significantly more performance (fps) then if it is spawned hot on a runway or in the air, also it seems when you use the external view then move back into the cockpit the fps drops for a while then recovers, not sure if this is because of the simulator loading and unloading the cargo bay or passenger cabin model. 2. I cannot hear the simulator ATC at all even when ensuring all the ACP volumes are set to max and turned on. 3. Some switches are still flipped like the ENG TRIM s…

So I have been enjoying the A300 for quite a while now. I'm flying the compatible version on MSFS24 and the lack of proper dome lightning has been annoying to me since the start. However, today I got it working. I'm not sure if it's a bug, a workaround or maybe pilot error. But the following is happening. Spawning at the gate cold and dark. Switching on batteries, ext-power and dome light. The lights turn on but illuminate nothing: Next up is starting the APU. For this purpose I switch to APU-gen and again, no illumination: I then switch over to the EFB and select the APU ready state, load it in and all of the sudden the dome light illu…

When loading SIDs or STARS the coordinates are bugged and thousands NM away. See also post in Navigraph Forum here I have a Navigraph subscription, use MSFS 2024 SU2, and have the aircraft updated to the latest version. (Added info: The same issue appears to be also present in the A330 from INI)

no power to plane with batt gpu on black screens RE INSTALLED STILL NO POWER.

So I discovered today that the A300 finally got an update to 1.1.5 which should of made it compatible with MSFS 2024. However while the aircraft loads in, everything but the EFB is frozen. Thinking this might be a WASM issue, I deleted the WASM folder and started over, but the cockpit remains inoperably. I don't see any other comments about this, so I wonder what I could be doing wrong. After version 1.1.3 it's supposed to work in 2024 right?

I have problems starting engine 1. no ignition, no fuel flow event though fuel pumps are all on. /JD

I have a problem when I'm trying to start engine 1. I enable APU bleed air, set the ignition switch to start A (or B, doesn't matter), wait for spool up and click on the fuel switch ENG 1 It seems that the engine tries to start und spool up, but never reaches a stable state, switching back the iginition switch to ignition off immediately shuts down engine 1. Engine 2 works as expected. Any idea what could go wrong here? Greetings Marcus