Modelling & Texturing

Hi, Hawaiian N765 livery available on IniManager still has G-STAR placard.

Hi! The L-1011 is wonderful - it brings back a lot of memories and is a joy to fly. I had a quick question: I noticed that the cabin lacks the center overhead bins. Will iniBuilds consider making a version of the cabin with modelled central overhead bins? Here's a reference: https://www.airliners.net/photo/American-Trans-Air-ATA/Lockheed-L-1011-385-3-TriStar-500/116352/L Also see, generally: https://www.airliners.net/search?aircraftBasicType=8195&aircraftGenericType=8195&aircraft=32241&photoCategory=3&sortBy=dateAccepted&sortOrder=desc&perPage=36&display=detail Thanks!

With the latest updates. Half of my liveries will not appear. Not selectable under configurator. I have uninstalled and reinstalled several times both the L1011 and the liveries with no success. Any assistance is appreciated.

This seem to be an issue with atleast Air Canada and Air Transat from Inimanager... Seems the color depends on livery/fuselage color? Air Transat is blue in the same way..

Hi, Seems like the dirt layer when using the slider i pfb cause the wings to flicker!?

I like the added smoke on startup, but it should only happen once fuel is introduced, not on the starter motor.

Good morning. The tri-star livery for ZE704 in the Europe livery pack from the marketplace isn't working. It should be a white RAF livery, but instead keeps using a rusty brown livery instead. I've installed, uninstalled and reinstalled and still the issue persists. This is for the livery pack on the marketplace for the tri-star. Many thanks.

On my RTX 4080 with 16 GB VRAM I run out of VRAM when I pan the camera towards the flight engineer deck. This happens on both busy airports on the ground and in small default airports. Is there a plan to include a variant with lower texture resolution or without the cabin perhaps? I believe this will improve performance for those of us who can't afford a 24 or 32 GB video card and still want to enjoy the plane on high graphics settings 🙂 Somehow, this is the only 3rd party add-on airplane that eats so much VRAM on my current graphics configuration and usual airports I fly to and from.

FO side clock hour hand is black under instrument light with no flood lighting And if you click by the label on the FWS CARGO COMPARTMENT extinguisher guards, the label disappears never to return. The guards work fine. Example below shows one missing after clicking. All the other guards seem fine.

Wanted to share that the official livery for N388LS for the L1011 still has the G-STAR decal. I have the latest one available on inimanager. Selcal should be EH-BS.

just another tid bit on the spoiler operation...they actuate way to quickly...they are almost instantly actuated..should be slowed down. thrust reversers are still a little quick as well but operate fine....just needs the animation slowed down a bit.

Just stumbled on this issue after updating to v1.0.2. I'm using the Cathay Pacific livery, if that makes any difference. I'm seeing what would appear to be the markings around the left rearmost passenger door but nearly in the center of the fuselage, floating in space among the cabin seating:

hi there! since the new update the yoke on the cpt side shakes while on the ground. the yoke on the fo side doesnt do this.

I'm still getting the G-STAR/SELCAL AB-CD placard. This is with the BWIA livery.

The Pan Am L1011-500 has texture issues with the right side main landing gear door. Also the starboard side forward Pan Am logo the letter "P" is incorrectly angled at the top thanks

First of all , what a wonderfull but glitchy aircraft. the list is growing , but hey…. Its an old aircraft . After spending an hour setting up the plane I called the GSX pusback truck. it pushed me nicely on the baseline but than i got two msfs warnings gear and tire damage. And that was it After discon. the tug the L1011 could no longer move . this is now the second time it happend.Any suggestions other than using the paper FB pushback option? (And sacking the tug driver)

So, just updated to 1.01. Booted the sim and brought up the standard cabin livery. This is what I now have. Am I alone? A hint as to what the heck is going on?

Not sure if this already known, but I updated to 1.01 via marketplace and all external textures for all liveries I downloaded from Inibuilds manager have pink tiles in several places throughout the fuselage, wings and tails. And in the cockpit, it looks like this. I went back the marketplace and the status is installed, size 3GB. Should I uninstall and reinstall via marketplace?

Wing tip geometry looks to be incorrect, trailing tip of the wing should be slanted up compared to the leading tip of the wing. Here is some photos for reference.

Trying to download this livery, I seem to get the sand coloured zd951 instead. Tried everything Google has suggested but still not able to get the White version. Any help please.

I find it nearly impossible to paint a logo in 2d on the rudder psd. The logo needs to be split into pieces angled and placed without much uv help. I take it that all liverys are done in substance painter or blender

There seems to be an uneven splash of the strobe lights. The right wing splashes the light onto the fuselage brightly with multiple flashes whereas the left hand does not. The splash from the right wing on to the fuselage looks unnatural also. I have had this effect consistantly on multiple flights.

The Compressor “disks” look terrible under power…almost as though they are not exactly “centered”. Will this be addressed in the next update?

iniBuilds, I noticed by several of the streams that the flightdeck glass has a heavy tint applied making the outside view darker them normal. The passengers windows do not have this heavy tint when looking out them. Will there be a way to lighten the tint or an update so the flightdeck is not so dark. I looked at other MSFS aircraft and the L-1011 is the darkest of all. I have included a few pictures that show no tint, tint line as you pass through the glass and the inside tint view. Please consider lighting them up some. Example in this link from Kenco's flight. Thank you and I can't wait to purchase the aircraft.

The Tristar product advertisement on the homepage says that liveries are available through the iniManager. I downloaded and installed the latest (version 2.5.2) version of inimanager but no liveries are shown for the Tristar. If I click on the Liveries link on the left panel it simply tells me that I do not have any products that require liveries. Tristar has been purchased via Marketplace.