Modelling & Texturing

Hey guys, there just was an update to Version 1.09 of the FS2024 premium version of the A300-600. Huge problem: All liveries are gone. I don´t know if this is itentional or a mistake: If it is indeed a mistake, please fix this in a timely manner. If it is intentional: The included liveries were advertised in the marketplace and are as such a big selling point for the A300. Thanks und all the best

Hello, Is there any way to increase the LOD render distance for this aircraft? For us that like to make videos every now and then the Engines, tail fins, gears renders very late, and disappears very early. I have tried changing my sim settings with no luck, and I have them pretty high.

Hi everyone, first of all thanks for the latest update. The long term support for your first aircraft is much appreciated and for me it gets more perfect and fun to fly with every update! With 1.0.10 I've noticed some strange behaviour of the APU heatblur. It appears to remain in place where it was rendered for the first time, not moving with the aicraft at all. At the arrival airport there is no heatblur at all becaus I guess it still animates at the departure stand. 😄 I'm not using any effect mods, this is pretty much a vanilla install. Maybe you can take a look when time allows? Thank you!

Hi everyone, this is not new but I've never seen anyone mention it. This is probably very specific to the D-AEAF DHL livery but may be present on other liveries aswell whenever they have sprites around this area. Whenever the door controls hatch door next to the main cargo door is opened, the red sprite above the door doesn't animate, but there is some weird shading going on instead. Nothing too bad but maybe worth checking at some point. Cheers!

Hi everyone, thanks for the latest update. Unfortunately, a little artifact sneaked into the latest release. There's a black thing floating above the innermost spoiler hinge on the right wing: Maybe something to quickly remove for the soon to come second update? Cheers!

Hello all - Kind of funny, but frustrating all the same. Has anyone experienced issues with the pilot and co-pilot appearing to be floating out over the nose of the aircraft? It seems that switching to exterior view causes this to happen. When I switch back to cockpit view, the co-pilot remains on the nose (dosent help with my landing at all). Any ideas on how to remedy would very much be appreciated!!

Hi everyone, unfortunately with v1.0.9 a lot of buttons, especially in the overhead (haven't tested every single one yet) have their clickspots greatly reduced in size. It's only about the size of the red square in the following screenshot: It's basically impossible to properly push these without being close up. This is the same across all variants. Can you please check? This makes the plane kind of hard to control once airborne. Cheers!

The logo lights do not work for both the GE & PW engine pax variants, however they do work for the freighter variants though. I have tried reinstalling the aircraft through inimanager and also a clean install by clearing the WASM folder.

Hello: I have a weird issue wherein the spinner "spiral" on the GE variant does not appear on one of my liveries. In an effort to diagnose the issue, I have been trying to find the default spinner texture anywhere within the default inibuilds folder, but have been unable to locate it (I found the base fan texture, CF6_SLOW.PNG.KTX2 and CF6_FAST.PNG.KTX2, but not the spinner texture). PW variant of the same aircraft livery does not have the issue, and the issue does not appear on any of the iniBuilds repaints, so hopefully someone here can help me out. Thanks,

Hello, i reported this on the discord, version 1.0.8 fs24 premium, the issue, which was resolved 2 updates ago is back again. As seen on this video, the clouds bleed through cockpit. ScreenRecording_05-14-2026_12-35-06_1.mov

The preview images for EI-LDD and B-LDD are reversed: EI-LDD shows it as painted for Air Hong Kong, and B-LDD shows it as painted for ASL. Additionally, the livery for EI-LDD is outdated and does not reflect its current paint scheme, which has been in place for more than a year (i.e., it no longer has the half-white/half-yellow paint scheme).

No Tail LOGO Light when on the ground or in the air at all when switch is set to #2 ON on all models of the A300-600R.

Tablet EFB flickers on opposite side of cockpit when in the Pilot or FO seat. It flickers badly in VR when in TAA Mode but does not in DLSS. I fly in TAA as it makes cockpit less blurry and readable.

I've tried to port over my DHL EAT 2020 liveries to the 2024 Premium version for several hours now. Sadly, it seems impossible for the model to load my custom made interior door and side wall textures. Model file structure and naming shouldn't have change from versions, I assume. The livery in 2020 got plenty of custom made details and additions. It somehow seems that the galley side wall texture is completely disconnected from the model or missing in general with the 2024 "Premium" version. I've deactivated all texture folders, including all fallback paths and variations of it. Everything is in purple checkerboard, except the side wall. The texture sheets…

Hi everyone, thanks for the latest A300 update. Glad to see this aircraft still receiving some love and getting the few last rough corners polished out! I don't know if I just noticed this now and it's bin here before, but with the latest version, there's to texts on the overhead that heavily flicker during night time. The ENG START and ENG TRIM labels are strobing/z-fighting like crazy between two different texture states: Maybe you could look into this? Cheers!

Morning all, I recently fired up the A300 in 2024 but found that the cockpit textures appeared very blurry in some spots. The text on the parking brake handle, for instance, is completely illegible. Obviously these aren't game breaking issues but I don't remember the textures being this bad, am I missing something?

Hi , I had a thread here about the poor windscreen textures. it has been deleted? I have a copy of the whole conversation. Though your team claimed they couldn’t reproduce the effect, you actually did and I pointed it out. I have the image you posted. Then i got no reply 😞 now it is gone? if it has been archived because it’s logged that’s great! an explanation would be great 🙂

Hi Inibuilds team. Seems like a lot of external lighting does not illuminate despite the switches being set to on. On my current flight I had no visual navigation lights (red and green), but I did have the logo lights. I have no taxi light nor landing lights. No bulbs are visually on and no lighting is given on the tarmac. MSFS2024 SU1 and A300 2024 1.0.1

Hi friends, Just wanted to note that Row 7 in the A300-600 for FS24 is missing. See screenshot 🙂 Also, when I try to sync the W&B from SimBrief, it isn't working - there's no change in the payload. I had to insert it manually. Tried in FS24, latest stable/public release patch, latest A306.

I discovered an error with the engine fan animation. The engine appears to be rotating much too slowly. This issue only affects the MSFS 2024 Premium version of the A300 600, Freighter & Passenger versions, with both engine options. For comparison, I installed the 2020 Compatible version, as well as the inibuild's internal A310; these versions work without any errors. Is this a known issue? Best regards, Mar_V

Hi everyone, first of all a big thank you for the latest update and adressing a lot of the visual aspects! A little something I'd like to pass on to you: The main gear appears to be missing a lot of texture/faces. Parts of the bogie aswell as the brake discs are invisble. That's not only happening for me but can also be seen on your preview screenshot of the glowing brakes. Maybe you can take a look? Cheers!

Hi all, complete forum newbie, forgive me if this question is already asked, I've had a bit of a search and will keep searching. I recently bought the A300 on the FS2020 marketplace and then bought the upgrade in FS2024. (sorry, don't know if this means it's compatible or premium version). To my surprise the FS2024 is then only supplied with planes in inibuilds factory scheme, and an all over white scheme. I'm pretty sure all the advertising photos in the marketplace have the aircraft in various paint schemes. Can anyone please tell me how to get some liveries for the FS2024 addon? I've checked flightsim.to, but there's not a lot there. I assume I can't align my mar…

The placard for the backup compass says "SYEER" instead of "STEER".

On the latest update and was flying through clouds and could see the clouds in the cockpit another thing is the “en route” map, it just keeps flickering

As the picture shows, half of the landing elevation display can't be seen at night now.