Other

One is that I have a very high performance system and well when I switch from being outside the aircraft during flight and come back into the flight. Every light in cockpit is on and then they go off and it returns to a normal flight. Also, I have the Marketplace version of inbuilds EGLL. The jetway connector thing isn't in my EFB. How do I get it there?

Hello Everyone, I don't understand, i just started a flight on the A380 from a COLD AND DARK state or even when in status READY FOR TAKE-OFF. I pushbacked using GSX, and when i release parking brake and apply thrust the aircraft doesn't move at all.(chocks off and all doors closed of cours) Any ideas? Kind regards Mac

To reproduce Start at EDDL on the runway Load Simbrief plan on EFB Apply Load & Fuel (instant) Turn off engines Set state to ON APU Request the flightplan on the INIT Page Information Aircraft: A380 RR Basic Cabin Simulator: FS2024 Version: v1.0 from Marketplace Reduced Textures: Yes Navdata Method: NAVIGRAPH OFP: Not required Specs: AMD Ryzen 9 9950X3D, RTX 5080, 64GB DDR5 RAM Autosave: none WASM: Error during REFUEL_PANEL_gauge_update execution. Error code : 0xc0000005

Hey guys. I'm finding GSX integration with the A380 is very hit and miss. Just to clarify before I go on. Ive downloaded the GSX profile, its installed correctly. I have checked that thr remote server is selected on within the GSX settings. So what im finding is, when i import my flight from simbrief, I then head over to the Ground Ops tab on the EFB. If I go to "load with GSX" and select All. I'm getting a real mish-mash of things happening/not happening. I just went to load up a flight, parked at OMDB and started the GSX loading process from the efb. Water service arrived, as well as fuel but no catering. The refuling truck arrived but only filled the aircraft to ab…

Hello I love the feature for long haul flights (until you can work out x8 sim-rate at least 😉) but when jumping ahead to a waypoint the time doesn't skip ahead with the rest of the sim. All of the plane's systems adapt but the in-sim time doesn't change, seems like it should. Thanks

Is there any way to remove the blue highlight from the buttons in VR when I’m pointing with the controller? It’s really annoying, and the trick of switching the cockpit interaction mode to "legacy" only works in 2D. I was able to fix it on the iniA350 by editing an XML file, but I can't find anything similar for the A380.

Waiting for the WW tiller but till then which of these would you guys suggest?

im not sure why the images in the FAQ say not available in my region?

Can anyone tell me why the dropdown menu on atc com cannot be displayed see photo

you cant reach them to close them in VR they are too high, same with APU cowls however they have a close option on the tablet so ok.

Hi I am having problems with trotle calibrations. I tried to set a380 throttle so i have set in contorls of msfs 2024 to nesceary settings so Throttle 1 and 2 to raxis x and throttle 34 to y and i tried in efb calibration app and only last 2 engine move and i don't know why? can anyone help me!? Thanks t tle calibrations. I tried to set a380 throttle so i have set in contorls of msfs 2024 to nes

I had this WASM crash when actioning the FUEL ECAM: CG at FWD Limit during CRZ To reproduce Load autosave once the ECAM pops up WASM crashes as soon as you click off the checklist. I used the right screw. Information Aircraft: A380 RR basic cabin Simulator: FS2024 Version: v1.0 from Marketplace Navdata Method: NAVIGRAPH OFP: Not required, happens on any route Specs: AMD Ryzen 7 9800X3D, RTX 5090, 32GB RAM Autosave: Attached latest .BIN file before crash WASM: Error during SystemsGauge_gauge_update execution. Error code : 0xc0000005 1789911022.bin

Not sure if anybody can help with this, but when trying to get GSX to board the aircraft. I am asking for this via the EFB with 'Load with GSX'. The passenger boarding only takes about 1 min, it doest take that long to board over 300 passengers. Any way to fix this to make it more realistic ?

Hello, I hope i'm allowed to post this here, if not feel free to delete the post. I've gathered all the A380 flights from the last 30 days thanks to the FR24 API in order to create a database of A380's Gate that will send you via datalink/satcom the expected gate base on your company and your departure/arrival airport and check in the database to give you the most realistic gate for that flight/ Besides, if you fly on vatsim and someone takes your assigned gate, the plugin will send you the other most suitable and realistic gate. you just need to enter you simbrief ID and hoppie log on code and have an internet connection during the flight https://fr.flightsim.to/a…

I downloaded the aircraft. Completed a flight. After landing the aircraft came to a complete stop on the runway and could not be moved. Since this, whenever i try to load the aircraft i get a warning "DXGI_ERROR_DEVICE_HUNG. I have a 5080, 32gb and never has this issue previously

So I landed after a multi hour flight which was uneventful, however panned outside to look while taxiing and noticed that the wing tips were drooped a massive amount. had 12.8T of fuel left in the tank and landing weight was 340.8T with 423 pax. this doesn’t look right, here is a screenshot at the gate after the landing.

Hi team, I’m encountering a problem when trying to bind hardware buttons to several of the new A380 input events using FSUIPC. The bindings do trigger, but the associated cockpit buttons remain latched in the pressed state and never return to the released position — even when sending a parameter value of 0. Events affectedCode AIRLINER_THROTTLE_ATHR_DISC_1 AIRLINER_THROTTLE_ATHR_DISC_2 AIRLINER_SIDE_STICK_DISCO_CPT AIRLINER_SIDE_STICK_DISCO_FO AIRLINER_CPT_TILLER_DISCO AIRLINER_FO_TILLER_DISCO Hardware usedThrustmaster Airbus Joystick (Sidestick) Thrustmaster Airbus TCA Quadrant What happensWhen binding any of the above events through FSUIPC the event is received by the a…

I'm not talking about popouts. Glad that is there, but Fenix allows this and it's great to have the EFB on a tablet not connected to the system physically.

I was flying at cruise, FL400, when unexpectedly the ECAM CAB PRESS EXCESS CAB ALT alert was triggered. I’m not exactly sure what caused the cabin altitude warning, but when I switched to the external view, I noticed two openings/holes in the fuselage where the landing gear could be seen. I’ve attached screenshots showing the ECAM warning and the exterior model.

Greetings, Team. I try to pushback with Aerosoft Pushback Pro, at the first 10 meter it went just fine, pushback nicely. Until suddenly it turn to the left 90 Degrees, pushback around 8-12 meters then making 180 degrees for like 20 meters then 180 degrees. It is looping all the time, I patiently waiting about 10 minutes and it still making a racetrack pattern without following what I have planned. I stopped with "Hold" and have to cancel pushback after that. I have tried like 4-5 times until I decided to stop using Aerosoft Pushback Pro. Please, a help is needed for this one because it doesn't happened with any other Aircraft, another A380 or other Aircraft. Thank you ve…

Hey guys, firstly I have to say congrats to this very well made aircraft and smooth release so far! Looking forward to the A350 V2 with that quality! Problem description: I have an issue calibrating my winctrl minor throttles. I chose the 2 axis option and in the EFB everything looks and responds as expected (Throttels 1 and 2 are linked to my throttle 1 axis and 3 and 4 to my axis 2). But just the the throttles in the aircraft don't behave as shown in the EFB. Only throttels 1 and 2 move as if I would have chosen the 4 axis option. See ond the screens below. I have only configured throtte axis 1 and 2 in the MSFS settings. What I already did: I did a reset of the ca…

Hi iniBuilds team, we fly the A380 Airliner (RR and EA) with the official SimBrief profiles linked in the FAQ ("iniBuilds (MSFS) - A380 Airliner RR" / "... EA"). Both profiles have: wgtunits: LBS oew 628,000 / mzfw 813,505 / mtow 1,267,658 / mlw 870,825 (all consistent with the real A380-800) paxwgt 175 / bagwgt 50 maxcargo 10,300 lbs (= 4,672 kg) SimBrief treats maxcargo as the combined limit for baggage + freight. In practice this means that with a full cabin of 484 passengers at 50 lbs each, the baggage alone is 24,200 lbs (about 10,980 kg). That is more than twice the hold limit in the profile. What we see in every OFP generated with this profile (5 flights, 15–17 Sep…

i just checked the turbulence data and i just ask myself if it can be true :) This is the only plane, which behaves like that. Just would be nice to know if its a bug or not. i am flying far to high to be influenced by ground Winds etc. Sometimes they just jump back to 0, then run up quickly to.99 again. Thanks a lot in advance

Hey guys, why are the stairs not connecting to the door? It seems, it's configured correctly in gsx airplane profile

Hello. I did a flight from LHR to DXB. On both airports, jetways didnt connect and GSX ground services vehicles didnt spawn. GSX still loaded the aircraft, my settings were at the fastest speed, but the boarding service finished in about 10 seconds, much faster than I am used with the A350 even if the speed is set on insane, the difference in time is crazy. Also everytime I toggled jetways, the aircraft kept opening door L3, lower deck over the wing