Support

Hi Team, I have the latest version of Dubai v2 updated yesterday via the ini manager in SU6 of MSFS2024 with the latest GSX version and GSX Profile and upon landing into Dubai it looks like I have duplicate jetways? Any suggestions?

Hi folks! I purchased OMDB in the MSFS 2024 store, but didn't realize it was V. 1.0.1 - how to upgrade to V2? Thanks!

Dear all. Overall I'm very happy with v2 and must admit, that FlightSim has come a l9ng way since I purchased FlyTampa's Dubai first back in 2004. It is amazing how much love and passion was put into details. I found the smoking rooms I used back in December 2025, the Hard Rock and even the McD. 😁 But, what I noticed was that regardless if I use JF FS Traffic or AIG FSLTL the main terminals A and B gates are not occupied at any time of the day, with the C gates having six to seven Emirates aircraft parked. All other gates in this area are unoccupied. There are some EK aircraft at the cargo or maintenance areas, some other airlines at the VIP area. Other airlines park co…

Again hello all here! I've just tested OMDB v2 a bit and saw that the jetways are not moving. With FBW's A23X neither switched with the onboard EFB nor with GSX Pro. Please check that, iniBuilds... Thanks a lot! Bert FS Reviews

I recently purchased the inibuilds a380 and new version of dubai omdb airport v2 from inibuilds. When I load up the plane at, the mult-jetway tool in the EFB says that "No Jetways Detected" and I cannot connect the jetways to the plane. Additionally, I tried to manually connect a jetway through the EFB, and that did not work. I then tried in GSX and that did not work either. I've tried at gates A4 and A6 and this does not work.

As you can see, the landmarks didn't update with version V2 on my install. I already tried uninstall and reinstall and also delete rolling cache.

Landed at OMDB in the new A380 and received instructions to taxi to Gate A9. I understand Gate A9 is one of the gates with the new multi jetways and equipped to take the A380. However engine 4 is super-imposed on the building supporting the jetways for gate A8. Tried to reposition using GSX at gate A9 - repositioned OK - but engine 4 once again cutting into the building. Gate F12 is superb - has the space for the A380 - but, interestingly, in the real world is not equipped for the A380! Can we have the gates equipped for the A380 large enough to take the plane?

Hi everyone I'm just asking i bought inbuilds omdb airport from xbox marketplace but i don't now how to updated for omdb V2 ...can anyone help please Thanks.

Hi, do you have to select (click on) the GSX profile and multi jetway buttons to install them? After installing, I have a GSX profile of the 13th of september 2026, without clicking on the button in the inibuilds app. What is the button for, if you dont have to click on it?

New Dubai OMDB V2: The yellow gate parking line ,including the stop markers for various aircraft models, is offset from the default GSX position; this occurs at all gates in concourses A, B, C, and D.

When will GSX allow your multi Jetways to allow passengers to be seen? GSX newest update mentioned a fix but I just started a flight from OMDB and the 3 jetways at Gate F12, only one was operating (I suspect the top one for an A380). I was in PMDG 777-300 and your multi jetway system only identified the top jetway at this gate that could connect to any door. When boarding commenced it was great not to get the stairs connecting but there were nil passengers, even though the aircraft system was counting up the 367 passengers loading. Would be good to at least get an indication that GSX are on board to assist Inibuild with resolving this.

Hello all here! At first many thanks to iniBuilds to update OMDB to v2 for MSFS 2024 that much - most appreciated... May I kindly ask to change the approach light systems (ALS) of runways 12L, 12R, 30L and 30R from a CALVERT (HIALS I) to CALVERT HIGH (HIALS II) keeping the Sequenced Flashing Lights (SFL) and the Touch Down Zone Lightings (TDZ) alive which would be correct according to the current charts from Jeppesen and the General Civil Aviation Authority of the UAE https://www.gcaa.gov.ae/en/ais/aip-view-package. Thanks a lot in advance! Bert FS Reviews

Using multi jetway tool. Ask jetway 2 to go to door 2L and it does this: https://ibb.co/rK4hQZkX Also tried to get jetway one to L1 and I had an error message 'extension limit' or something like that. You can see from the screenshot there is no way it's beyond its extension limit. Also annoyingly, I can't get GSX to dock jetways either with multi jetway tool installed.

iniBuild Tristar L1011 OMDB v2 MSFS 2024 GSX Pro 4.0.22 3 files from the "Official GSX Profile" folder were copied to “...AppData\Roaming\virtuali\GSX\MSFS” When GSX Pro started, the following message appeared: I selected - AUTOMATIC. The jetways do not move! I tried this at different parking gates.

Hi, I just wanted to buy the premium version for MSFS2024, I do own the 2020 version. I tried to apply the discount code (OMDB-UG) but it isn't accepted. Is there a new upgrade code available? Thanks and kind regards, Raffael

Hi, I've encountered a problem with the iniBuilds OMDB scenery in MSFS 2024.Even after I disabled the static aircraft option in iniManager, they are still appearing in the simulator. I also tried manually renaming omdb-scene-statics.bgl to .disabled, but the static aircraft remain visible.Since MSFS 2024 has a different file structure, is there a specific location or another method I should use to properly disable static aircraft?Thank you for your help!

I have a fairly high end system: AMD Ryzen 7 7800 x 3D 8 core processor with 64GB RAM and a Nvidia Geforce RTX 4090 graphics card. On my first flight YPAD to OMDB all was going so well until I was about 500ft from landing. I started getting really bad stutters with warnings of my GPU being at its limit however I managed to land and taxi to the gate. It was not enjoyable. Especially the fact I just purchased this scenery/airport package. On arrival to the taxi stand the VDGS does not work (On this flight I taxied to F13) and after the jetway was connected (using the GSX profile provided with this purchase, the deboarding process commenced and GSX sends the bus for all pa…

Hi, Recently bought OMDB for msfs24 and in the pmdg 777 300ER I couldn’t select any SIDS for those runways. I have disabled the default OMDB, have updated all nav data with the hub. Any clue as to what the issue might be? Thanks

Hi there, I am having issues with the FSLTL AI Traffic (injected by BeyondATC) behaving erratically at this airport. On all uses of this Scenery, when 30L is operating arrivals, the ai traffic flies reciprocal over 12R while descending towards the 30L threshold and then abruptly does a 180 and touches down and rolls down 30L. I will attempt to capture some photos if you so require. I have successfully disabled the default hand crafted OMDB by Gaya Simulations provided within MSFS 2024. I do not have any other Dubai sceneries installed. Any suggestions on how to rectify this issue which is limited to only to OMDB by inibuilds. This wasn’t happening with the default s…

As can be seen in the picture, the center Jetway on D1 is "unplugged" from it's socket. I thought this was maybe because of GSX's 3rd-party airport's conflict with jetways. But GSX's Jetways are all disabled in MSFS 2024.

hi INIBUILDS i was attending the event tonight on vatsim on dubai. the ground assigned me gate A7, i try to open on gsx using your profile but i can't find it, it doesn't fit there

As the title says, I'm seeing two issues with the enhanced OMDB. ♣ The runway threshold lights (and side lights) are wrong on RWY 30L and RWY 12L. This is similar to the issues I pointed out sometime ago on the 2020 IniBuilds OMDB here: Now we have the same issues although this time, it is just on 12L and 30L. ♣ BeyondATC is reading the runway thresholds wrong, and ignoring the displaced thresholds, giving only minimal runway real estate for takeoffs. For instance, Runway 12R threshold is at K4 and the displaced threshold is at K1, but BATC ignores the displaced threshold, and also portion of the actual runway, starting at K7 (see screenies) Here are …

Hi, i have a 7800x3d, 7800XT, 64GB of ram and the performance at Ini OMDB is insanely bad, on 2024. Yes i have the Microsoft OMDB disabled. Loads of stutters and even with settings turned to Low, and a TLOD of 30. it lags and stutters. the moment i get out of the dubai area i have a TLOD of 400, all ultra settings and 0 issues. for example the Inibuilds LAX performs better. Heathrow is about the same as dubai is for me, and if i would try the a350 on one of these airports. it would be unplayable. I have this even with all things disabled in inimanager for OMDB. Take a look at the extreme VRAM usages - loads of stutters happen, especially when panning / switching camera v…

Positioned on C53 in A388 in 2024 but jetway doesn't operate (either using EFB or with GSX). GSX reports no jetway available for boarding/deboarding. This seems to be a scenery issue (GSX isn't a factor).

Just bought the Enhanced 2024 OMDB scenery. As with others, I had overlapping sceneries due to the default handcrafted OMDB being streamed in. In my case, the most obvious problem was the terminal and double gates. So I disabled all three of the OMDB packages in my Library folder in MSFS2024 as others have suggested. I uninstalled and reinstalled the iniBuilds version, restarted and still the same problem. Next I removed in the Packages/StreamedPackages the Adobo OMDB folder. Restarted and still seeing the default terminal. I'm not sure what else to do. Any help would be gratefully appreciated.