OxkyGThaib

This is the same like my previous post about the Decel and Approach-Phase, Kyle. Please refer to this post https://forum.inibuilds.com/topic/41204-fmgcs-problem-so-far/ Maybe the additional information is missing "More Drag" or "Drag Required" messages Thank you HaveASafeFlight!

I thought this only me, but seems we have same situation. 😂

As for me these 2 days, every time I start A380, now the "Check AIRAC" button suddenly missing, required to re-Login to the Navigraph. Not happening on other IniBuilds aircraft so far. Please Help... HaveASafeFlight!

Greeting, Team I just finished flying A220 then switch to A380, suddenly A380 showing this: The vertical stab logo is blending with the terminal but it is gone when moving above the terminal. Also missing some gears in it. I have to reload MSFS because changing livery seems still exist. I tried with other IniBuilds Aircraft, is not happening like that, or any other aircraft. This is only happening everytime I switch from A220 to A380. But other IniBuilds Aircraft is not conflicting with A220. Please help. Cheers HaveASafeFlight!

I am also experiencing this, suddenly I was Logged Out everytime approaching Descend 😵‍💫 Cheers, HaveASafeFlight!

This is what I found from KAL A380 FCOM: So, obviously there's option for Derated Takeoff Thrust instead using ATM/FLEX or Max T/O Thrust Cheers, HaveASafeFlight!

Greetings, Team Our lovely FMGCS have many function, also act as SUPER-COMPUTER for Pilots. But seems it misses some point. FMGCS CREATING WAYPOINT FMGCS known is able to create waypoints whenever is needed to help either targeting route or to "guard" some altitude. Directly to the FPLN Page or STORED WAYPOINT. I am flying SVO-AMS today, I can't help but notice that it having some problem, like 2 samples below: Sample 1: On FPLN Page is not able to create "Place-Bearing/Place-Bearing" Waypoint which identifies as PBX##, but whenever I tried to insert it on PILOT STORED WAYPOINTS, it goes funny 😂 I try inserting "ISENG" Waypoint which consist of SPL-020/FRO-350 which like this: but stored like this ===> it should showing the preset P-B/P-B (or in PBD, it should show the P/B/D) But, what makes it even funnier, it shown like this on FPLN Page ====> waaayyy too far from the planned waypoint 😂 Sample 2: The "Place/Distance" which shown as PD## also need correction, from Waypoint ARTIP to SPL to make ARTIP/6 or SPL/-25 which a place along the route in between, but somehow it is showing this: i put it AFTER ARTIP waypoint but somehow it placed AFTER SPL and not along the route, it also makes a different Bearing than the preset. I notice this is also happening on A350, but I forgot to tell you about this. FMGCS PROBLEM DURING DESCEND-TO-APPROACH PHASE AND AFTER-GO-AROUND-TO-RE-APPROACH PHASE Descend to Approach Phase During descend phase, FCTM said that FMGCS calculates Descend Profile AT 2.5Degrees Glide Path and with decelaration of 100feet/second on Level Flight or may less during deceleration (Rule of Thumb: 1,000 feet/10 Nm on Level Flight OR 2,000-2,500 feet/10 Nm in case of decelerating, with Speed of 10 Knots/Nm on Level Flight or around 20 kt/Nm during deceleration) ICAO Doc 4444 stating that Speed should be 250 kt below 10 000 feet, and speed 220-210 kt below 5 000 - 6 000 feet at TMA (Around 30-25 Nm from the Airport), and most of airport now are doing speed 180 kt between 12 Nm to 8 Nm and 160 kt from 8 Nm to 4 Nm. Then doing VApp until landing. From what I notice from IniBuilds (A330/A340A/A350/A380), DECEL Pseudo-Waypoint is incorrectly simulated. Previously, FCTM-NOR-SOP stating that DECEL Pseudo-Waypoint is around 10-15Nm from Runway Threshold and it may goes further back if there's a speed constraint selected either on IAF, IF, or FAF to target speed around VApp at runway (IF NO SPEED CONSTRAINT, and may way further back if there is Speed Constraint on selected waypoint) but somehow actual Airbus' FMGCS doing Landing Flaps Config AT FAF instead of doing decelerated approach which stabilized at 1,000 ft. That is why I notice ALL IniBuilds Aircraft doesn't simulate the Decel Pseudo-Waypoint at FMGCS correctly. For Example, I set speed on IAF (which PANS-ATM state around 10-15 Nm) at 180 kt, suddenly the Decel Pseudo-Waypoint moved forward towards FAF. And even worst at some High Altitude Approach (e.g LTFM which comes from 5,000 feet). See picture down below. <<=== Both Pictures showing LTFM ILS Z Runway 35R Actual Airbus FMGCS will move Decel P/W further back from IAF to compensate speed deceleration from Speed Control Constraint (250ktbelowFL100 or High Speed Descend) to GDot (which targeted by Magenta Dot) then targeting deceleration from GDot to IAF Selected Speed Constraint by Decel P/W. So I can say that this is incorrectly simulated. Missed Approach to Re-Approach Phase I notice that every time I simulates Missed Approach, the Cruise Altitude is stayed on previous Target Cruise Altitude (FL350/FL390 or whatever previous Cruise Flight Phase selected). If I selected any Altitude, suddenly the speed goes >300 knots AFTER I re-direct to some waypoints and the rest of calculation of Magenta Dot, and Decel P/W IS GONE. But some cases, the Magenta Dot and Decel P/W is there but the FMGCS doesn't comply with that restriction and maintaining speed >300 knot even though I already preset 250/FL100 (or 220/FL050) and selected target speed or ATC-Managed Speed. This also happening on A330/A340/A350, not specific on A380 Only. Also, during the re-approach, the VSD on A350/A380 are showing like this ==> Imagine if you are flying RNAV/RNP Approach with this 😂 FMGCS Keyboard Function if I want to insert "-" or "+" on CDU using Keyboard Function, this can not be inserted on CDU to make anything. But it is normal if I am using the CDU Keyboard. If you guys can make corrections about this on any update, that would be great. Thank you very much. Cheers. HaveASafeFlight!

I guess so, but I don't know it is coming from Aerosoft or A380 itself, I hope there's fix soon enough from Aerosoft or IniBuilds regarding this. Cheers

See the Down Arrow showing the FCU Target Altitude at the RUNNN point, it strict between FL170 to FL140. That is why the FL160 on Altimeter doesn't showing Magenta because FMCS calculates that you will reach FL160 approaching RUNNN Point which WILL NOT PASSED BEFORE FL170 or AFTER FL140. Unless you have changed one of the constrain after RUNNN (like SYMON or IRNMN) to AT FL165 OR ABOVE, then you will have Magenta on Altimeter. Cheers HaveASafeFlight!

Flex Takeoff Thrust is Flexible Thrust depending on Assumed Temperature Methods, while Derated Takeoff Thrust is Fixed Derated Thrust, it is fixed on 10% to 30% reduction depend on Engine Manufacturer. Also, Derate Climb is having a problem. I notice from FlexTO, AutoThrust transitioned to MCT first then DCLB. This is explains why the Derate Climb suddenly goes to Max Climb Thrust instead of Derated Climb. I hope this is fixed by the next update. HaveASafeFlight!!

Greetings, Team. I try to pushback with Aerosoft Pushback Pro, at the first 10 meter it went just fine, pushback nicely. Until suddenly it turn to the left 90 Degrees, pushback around 8-12 meters then making 180 degrees for like 20 meters then 180 degrees. It is looping all the time, I patiently waiting about 10 minutes and it still making a racetrack pattern without following what I have planned. I stopped with "Hold" and have to cancel pushback after that. I have tried like 4-5 times until I decided to stop using Aerosoft Pushback Pro. Please, a help is needed for this one because it doesn't happened with any other Aircraft, another A380 or other Aircraft. Thank you very much 👍

So this is normal behaviour for AutoThrust Reversion from Takeoff Power to Derate Climb Power? 😟 Interesting....

Greetings, Teams Still love this aircraft and this is my 6th sector for today. My 6th sector flying from FCO to SVO for casual flying using EA Version. With ZFW of 345.5T, Fuel 71.447Kgs and Takeoff from runway 25 of FCO. You can see the OIS Config for Takeoff: everything went well, but suddenly when transitioning from TO Power to CLB Power, I notice the Engine goes Spool UP instead of same power or lowering the thrust. You can see the config for CLB, Derate 1 Through 3 below, and it is almost FULL THRUST CLIMB POWER: DERATE-1 POWER: DERATE-2 POWER: DERATE-3 POWER: Is this normal on A380 or am I imagining things? Also what I know, DCLB mode washout around FL300, somehow it maintain DCLB until Cruising. Many Thanks for your attention. HaveASafeFlight!

For me, I found this particular light leak between the panel and the glareshield. this is happening anytime whenever we are facing the sun around 12:00 to 14:30LT See the red box and red circle for the condition. SafeFlight!

At the first time, this is also happening to me. I closed MSFS, restart it again and it is automatically enabled. It is downloaded and vary between 5% to 29%, stuck and redownloading again. Tried to disconnect the wifi then it is ready to install. I hope this is help for everyone Safe Flight!

Where is that? and where I could find the Manuals? Safe Flight!

Greeting, Teams. Thank you for your hard work in A380. this is another sophisticated Airplane from Inibuilds. But I have few question about this, some systems but some of non-systems: 1. I notice this problem on APU Cowl Door, I think some painting jobs need to be done. See the picture below. 2. The steering is a bit "funny", I use VKB joystick and everytime I start turning, the NW start IMMEDIATLY turning back to center causing the A/C suddenly oversteer OR understeer, using rudder or not using the rudder to steer. 3. Is the Reverse Thrust not implement yet? I use Moza MTQ MTA but the reverse not deployed eventhough i have put binding or put on reverser axis. 4. Is the BTV is not implemented yet? I have tried but it is not working somehow 5. VNAV ability is "funny" when you try to modify the Altitude Constraint. Somehow, it is worst than A350. 6. Can you check the Pitch Trim Functionality? Everytime i insert the takeoff performance, it set to Takeoff-Required Pitch Trim but everytime I pushed T/O Config Test, the ECAM Show disagreement of Pitch Trim. 7. Try to download the Livery from IniManager, someone need to do some reworks on the livery *lol. see the picture below That is coming from me for now. Safe Flight!

I agree with you, mine lost it function and dark blank after 2 hours 😄 but at least my navigraph function of chart is back 😁

I never try to remove the WASM problems before, but still I am considering your idea for the future need 😉 Buuuuttt, why don't we take time for a while to restart the sim for better future? 😄 Cheers 🍻

Guys, found this on Navigraph Forum, remember this works on MSFS2020, I apologize that I know nothing with MSFS2024. https://forum.navigraph.com/t/simbrief-dispatch-not-loading-3-10-2025/18973/11 The same idea I tried to use but changed the folder type to: Steam Version: %appdata%\Microsoft Flight Simulator\Packages\inibuilds-aircraft-a350 Store Version: %localappdata%\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalState\packages\inibuilds-aircraft-a350 DELETE ALL THE inibuilds-aircraft-a350 FOLDER and restart the MSFS20, try to re-login to navigraph on OIS and it will be connected (at least for me). I am hoping you guys able to connect using the same method. Cheers 😁