Deer-in-Motion

Started a flight, but once the engines were up and running I had no engine sounds from behind the aircraft.

It would help if they were actual screenshots instead of taken with a phone, with arrows or circles of something to highlight what you're trying to point out.

Flight tonight the v speeds looked more reasonable. Except taking off on RW8 at KDEN took about 10k feet of a 12k runway. Which feels odd.

And I just realized I didn't get the other screenshots you wanted. Sorry. In a bit of a hurry this morning.

Here you go. Took these this morning. I've included a screenshot of the Fenix EFB for comparison. Similar takeoff weight.

Almost stalled on takeoff because the perf calc gave me a V2 of 123 kts. At the same takeoff weight in the Fenix it was about 20 kts higher.

I'll try and replicate it. It was a very odd situation. I was too busy trying not to crash instead of taking another screenshot. I took that one because I've never seen fog that thick.

So far I've had two flights and have seen exactly none of the problems you've reported. So, YMMV.

Detroit was completely socked in with fog this evening, so I was using the Fenix's autoland feature. Because of this I didn't see the problem until I was right on top of the runway. The ILS beam is to the right of the centerline enough that I landed off the runway. Image attached to show how bad it was. And that I could see the airport buildings through the fog, which also didn't seem right.

English + units conversion would be great.

Okay, though what you'd said indicated you were still using the SimBrief button under AOC. Once the flight plans is downloaded enter the airports in the From/To section of the INIT page and it should populate the flight plan.

Did you use the SimBrief Downloader external application and not the the one in the MDCU in the aircraft?

For now use Use SimBrief Downloader and point it to: \Microsoft Flight Simulator\Packages\microsoft-aircraft-a310-300\work\flightplans If that folder isn't there you can create it.

Use SimBrief Downloader and point it to: \Microsoft Flight Simulator\Packages\microsoft-aircraft-a310-300\work\flightplans

Use the SimBrief Downloader and point it to [Drive]:\Users\usernamel\AppData\Roaming\Microsoft Flight Simulator\Packages\microsoft-aircraft-a310-300\work\flightplans Your path might be a bit different, but the main difference is the \work\flightplans folder.

And fixed. Adding the directory worked for the Downloader export. But direct SB import still doesn't work.

I don't see that folder in that directory, so I'm going to try creating it and point SimBrief downloader there.

As stated. When I push the import button in the ACARS menu Pending flashes briefly and it goes back to request. Trying to use the iniManager importer and then putting in From/To airports only populates those airports and not the flight plan. The plan is exporting into the right folder with the right information.

I'd like to add that I'm getting an upslope to 24L from the taxiway that's bad enough I need some serious engine power. Since I normally fly Delta I'm on the north side departure/arrivals so I don't know if the other runways are affected.

I've also reported this in the beta forums, but I thought I'd mention it here as well since it only seems to happen with the A310. On two flights my destination airport hasn't loaded in. The first flight was KPHX to KLAX. There was just a blank spot where the airport should be, as if it was vanished by Lex Luthor. On the second flight it was KLAX to KSFO. There's just nothing. I have iniBuilds' LAX, so I wondered if that could be the issue. But SFO is stock Asobo and I have the same problem. I did another KLAX-KSFO flight in the PMDG to see if it'd happen again, and it didn't. I'll have to test it some more. Once was a "Huh?" Twice is "wait a minute..." I'll try again tomorrow with another airport.

I've found that there isn't an aircraft.cfg file for GSX to read from for this aircraft.

What throttle quadrant are you using? If there's any axes mapped to Mixture or Prop pitch I've had this happen right on takeoff. If you create a profile without those mapped it should stop.

I don't seem to be running out of fuel. I can do this several times and the engines always return to the A/T setting after unpausing. It definitely seems related, though. But I'm glad you were able to replicate it!

I barely noticed there was a triangle when looking at it. Made it difficult to set takeoff trim.

This is what I did. I spawned on the runway with everything running and simply took off. Entering the ESC pause menu caused the engines to fluctuate wildly. See screenshots. I have a feeling that fuel flow is getting interrupted when entering the ESC menu. Screenshot sequence is bottom-to-top.