Systems

Hello I wanted to perform a flight to LTFM in the iniBuilds A330, but the waypoints of the STAR are completely misplaced. One example is the waypoint USROF. In other aircraft this issue does not occur — it only happens in the iniBuilds A330. I have the newest AIRAC and I have a freeware scenery in LTFM as the airport is broken if you dont have a scenery. Thanks for your help

Flight plan below: FRANE1M FRANE M604 GASBA M197 REDFA REDFA1A Imported to the MCDU, but contains no VOR's other than the SID and STAR. Missing M604, GASBA, M197 (see attached). I really love flying this aircraft and hope we get an a330-900 soon but this issue prevents me from flying on VATSIM as I would just be flying direct after the SID to the STAR which would be ideal, but ATC can't always support. Please let me know suggestions. Thank you Ryan

Hi, Everytime I try to fly the -200, when I click on the Fly button, the white wheel in the lower right corner starts spinning and then it freezes. I tried custom liveries and default Airbus livery, same result. I just can't use the A330-200. Any idea how to resolve this problem? Thanks,

Flying the A330 and there was a whole lot of traffic outside of Helsinki, I was told about traffic near me, but couldn't see it on TCAS. My setup for the system is TCAS mode on, TCAS atc 1, and tcas alt on, traffic selector on all, tcas mode selector on TA/RA Tried with BLW for traffic selector, tried TCAS mode TA, couldn't come up with any solution, would love some input on this as I'd like to know where the aircraft are

When I load up the aircraft weights on the INIT B page, fuel prediction shows negative as well as the EFOB on the F-PLN page. I've dispatched the flight using iniBuilds' A330 profile. Over the course of the flight this is being corrected to show the correct fuel prediction, but on ground it shows negative values.

My reverse thrust is only going to 45% n1 with reverse thrust deployment. Im using the tca quadrant and have set reverse thrust in the tablet and in the configuration file. Is there any fix to this?

Hi, I've been experiencing a strange behaviour with the default A330. After entering my approach on the MCDU, all the aircraft displays freeze, all the systems freeze (even throttle) and tha aircraft continues to fly uncontrolled. I've already cleared WASM but still no solution. Hope you can help solve this. Thanks

I don't know if this is just an issue from me but whenever i apply the fuel using the tablet in the plane the fuel isnt added to the plane. If anyone has experienced this or knows a fix please let me know

I have tried and tried and tried to find a solution to this issue. I have even removed all of my Navigraph data from the community folder (except the PMDG and iFly folder, I need those), and still no SID or STAR for the A330. I even made sure the FS default navdata is all the way to the top in the scenery order tool (in sim, I am not using a 3rd party reorder tool). I am sure there has to be a solution somehow to this issue... I would REALLY love to try at least the A330. I dont mind going back to the PMDG 777 for long haul, or the Fenix / iFly / FSLabs for medium haul... but still annoying. I hope this issue is not with the A350? I was contemplating in getting…

Seems like the old inibuilds issue is ported over where fuel consumption stays at 1x while simrate is on 2x+.

Hello! Are there plans to add an auto step alts function into EFB in the future? This would be very good for long flights and those people who cannot be near the computer for all 8-10 hours. Thanks!

Hello. The moment I take of in the a330-300 (RR) and engage ap and pull back the thrust levers to climb detent as the pfd tells me to do it goes to man thr. I use the same procedures I see most people use yet this still happens to me for some reason. Im on a windows 11 device and I use a wireless xbox controller incase that matters somehow. Incase anyone wants to know more exactly my procedures I will gladly respond but I dont wanna make this initial message too long.

Hello I have been having problems with the A330-300 Rolls Royce Variant The steps I take when I use this aircraft are as follows I import the simbreif flight plan into the simulator, I start the flight at the gate. The aircraft imports an incorrect flight plan into the MCDU so I have to go in Sec flight plan to import the correct one. Taxi and Takeoff is fine but when the HDG selector is in managed mode it does not follow the flight plan and goes in circles. I've tried using DIR-TO but that does not work. I've attempted multiple times but it just doesn't work. Am I doing something wrong I'm open to suggestions Thanks

I have assigned the Nose wheel steering axis and decoupled the rudder from the tiller in the efb. Turning the tiller actually turns the nosewheel, but the aircraft does not react to this steering input in any way. Coupling the Rudder again and using it to move the nose gear works.

Hey, since SU3 spike stutters have started showing up – they begin right at the takeoff roll. Nothing happens while the aircraft is on the ground starting from cold and dark, but as soon as the takeoff rollout begins, stuttering appears. I’ve already tried: - redownloading the streamed aircraft - installing the aircraft on disk - reinstalling MSFS 2024 (empty community folder) - deleting WASM Unfortunately, despite having strong hardware (64 GB RAM, 9800X3D, 4080), even though with FG I get around 120 FPS, right after rotation I start getting strange periodic drops down to around 20 FPS and then back up to normal (they last about a second but…

Removed

Hello the a330-300, a330-200 and the a320 all have stuttering after su3 and 5he macdu do not load the flight plan via simbrief. It's impossible to fly. Could you help me? Thank you. Carlos

Hi, is it possible to popout the PFD and ND instruments as it is possible in the A321?

Hello all, As I currently have an Airbus home cockpit, I (and many others) would like for the ability to be able to pop out panels (using Right Alt + Left Click) as is possible in nearly every other aircraft in the sim and also in MSFS2020. I'm very excited that we finally have a good A330ceo in the MSFS world, but not being able to popout panels makes it difficult to fly in the home cockpit. I noticed that this topic was brought up earlier (I've included a link below), but there has been no response from iniBuilds since November 2024. Reposting to hopefully gain some traction and see if this is something we can get added. Can we please get a …

I noticed that with both the A20N and A333 if I select the ILS28 at Zurich airport (LSZH) in the MCDU it freezes the whole aircraft. Nothing works anymore. The plane keeps flying and the sim is fine. It causes some weird wasm crash I think. Any possibility to fix that?

I am experiencing constant wasm crashes in the Inibuilds a330. For instance if I have to change my arrival in the mcdu, if I go direct to a waypoint etc. I have tried to manually install the packages files and deleted the Wasm folder and still no success. I really want to start completing LH’s in this plane it’s very frustrating, it’s annoying auto save still isn’t implemented either like the a350 if the suggestion could be made to asobo that would be great.

Everything froze up when I entered a hold at DARKE going into Katmandu. The aircraft didn't enter it in so I did it manually as per the chart and it quickly froze everything. I was able to control the aircraft, but didn't have any control on speed or anything. Flight control animations, landing gear, flaps and spoilers didn't work.

On my 2 most recent flights in the A330, my plane out of nowhere went into a spiral and crashed. The first flight was from JFK to Amsterdam. I was still in the climb phase. I am not sure if the spiral dive came before the auto pilot disconnect or after. The 2nd flight was from Athens to Amsterdam. I had been in cruise mode for some time. The plane deviated from course without actually disconnecting from the auto pilot. Then the spiral dive came followed by the crash. Has anyone else have any experience of this? I was looking forward to buying the A350 but I'm a bit hesitant now as I don't know if this happening across the inibuilds range of airb…

Hi there, I just had very strange problems with the A330 in MSFS 2024, when I tried to start a flight at the gate and chose the panel state "on APU": - The engines were "half running": EPR was 1.002, N3 = 30.8, N1 = 6.5, N1 = 14.9, from the outside the engine souded like they were running (and they looked like the nacelles were spinning), from the cockpit I got the engine start sounds all the time. All this while the starter switch was in the OFF position. - Engines could be started "normally" then. However, while being pushed by GSX (as many times before), an MSFS message "aircraft malfunction - gear system" showed up. I had to set more than 50% N1 to be a…