Other

A310 Broke for me mid December, EXT power shows avail, but when pressed does not power up the aircraft, even when spawning on the runway itself all the aircraft systems are off.

a couple of days ago, I downloaded MSFS for the A310 (since the X-plane license is not open) and I see that the plane is broken. The plane started up only once, after which it was always broken. I deleted the community, I reinstalled the plane, and the result is the same 😕

Hi, I'm unable to uninstall the A350 via iniManager?

Hello, yesterday I bought the new A350 version for MSFS2024 and almost everything works perfectly except that when I have everything ready to start the taxi or in general when I am redy to start moveing the plane on the runway it doesn't move. I have the parking brakes off, the engines on and everything is fine but the plane doesn't move. Please I would like your helpThank you very much

When I tried to fly the A310 a couple of days ago, I attempted to create a flight starting on the runway ready for take off, but all displays were blank, and the nobs and switches would not work. I used the aircraft several weeks before without any problems. I went into the General Options and turned off the USE NSVONG FOR XML GAUGES option and this did not solve the issue. Any suggestions?

hi everyone, im having an issue with the throttle levers in the inibuilds freeware a310. i was flying the plane yesterday and i took off as usual and when i was in cruise i pulled the throttle back but it did not move back in the sim cockpit it stayed up all the way. i tried everything reseting the bindings for the bravo quadrant, deleting the aircraft from my list and everything else and no matter what i did everytime i pulled the throttle back it would not move down in the virtual cockpit and that has never happened to me before. i dont know what could b causing that to happen. if anyone could please let me know as soon as u can any info on this matter and what cou…

On take off, when I pushed my No1 Engine thrust lever (along with my Eng 2 thrust lever), the No1 Eng would spool back down at about 85% N1 back to idle, after normal spool up before 85%, while Eng2 would continue to spool to take off N1 %. Once I had taken off (with about 10% N1 thrust reduction) I was able to enable auto thrust, which was then able to spool up the engine to take off N1%. In cruise, the engines are working perfectly with auto thrust armed. This hasn't been an issue with my Thrustmaster TCA Airbus thrust quadrant before. Anyone know the reasons / how to fix it? Thankyou!

Hi, the 310 is no longer crashing the sim after the last sim update (looks like it took Asobo/Microsoft ages to upload the fix) But I want to know what does the "enhancement" package enhances? I ask because I thought that maybe that enhancement is causing this: When you press F4 for full power the plane does nothing, it doesn’t work, you need to press F3 until reach the desired power When you fully retract the flaps the light of the tail turns off When you are on the outside view, seeing the plane landing, there is no touch down sound When you press F1 it used to cut the reverse, now it continues until you press F3 t…

Hi There, My issue appear to be very similar to Maverick3007. I talk to Microsoft this and the told me to contact Inibuilds. Here what I wrote to them. "I have never been able to use the A310 plane in the MS2020 even after the different updates. After selecting the A310-300 as my aircraft to use in the simulator and once it is loaded and ready to go on the runaway, The view from the left seat is incorrect and I am unable to adjust it. I see out of the front window but I can't see the flight instruments unless I use the down arrow on the keyboard to lower the view but then I can't see outside. I can adjust forward with the wheel mouse but I can't adjust …

Hello! I have recently encountered some really frustrating and game breaking bugs when trying to unpause the sim while in the A310, where at random some system in the aircraft simply stops working. Most recently the AP crapped itself in cruise after unpausing, as when I put it on pause it was going nice and smooth, perfectly holding altitude and following the flightplan, but as soon as I unpaused it would either be putting the plane in a spin or commanding full nose up and stalling the plane out. Tried every bit of AP troubleshooting I could think of but it just wouldn't work and I had to resort to handflying it. I've had other occurrences as well, like the flight control…

There it is again. The A310 crashes my sim when loading a flight. When loading it after having loaded the C172 before, it starts, but the flight guidance system gets messed up, so this seems not to be a solution here. So, what is it? Missing processor commands again, as apparently a year ago? When looking into the MSFS forum, I seem not to be the only one... I'm on PC, Win11, AMD CPU and Nvidia GPU, no beta. A solution is appreciated. Thanks Boris

Is this installed "on top" of the standard version? In other words, in the aircraft selection menu, should I see something like A-310 and A-310/Enhance or just one aircraft that is enhanced by the download?

The Inibuilds manual for the MSFS A310 makes reference to a "LDG PERF" feature in the EFB to calculate landing parameters (page 51). Am I blind or is this not present in the EFB and the document contains an error or some carry-over from a past X-plane version?

I have a similar problem to the issue in this thread: None of my switches are animated although the screens and displays do seem to be working. I also have the pilot avatar model sat in my seat causing clipping issues. It is almost as though it is modelling the exterior cockpit but internally. I noted that you said a patch had been sent to MS, was this implemented?

How can I increase/decrease sim rate?

I have no idea why they are not on can someone help?

Hello I've read that a fix will be applied for blackscreens issue. But what about Buttons, switches, nothing can be activated.... see attached picture Thank you

I use the MSFS Premium Deluxe version. After the 40th anniversary update, all newly added aircraft work fine, except the A310. After loading the aircraft, for example the engines are automatically in reverse thrust. I can't even move the thrust levers with the mouse. Other switches like the engine switches or speedbrake cannot be moved. I cannot change any settings in the EFB. The overhead panel does not work except for a few functions (external power for example). So the whole plane does not work. I waited until the first update a few days ago, hoping that the A310 would work afterwards. But it still does not work. A new installation was also unsucces…

Hello, I have not been able to start the A310 in MSFS. After starting with an empty Community folder and verifying the A310 loads I started checking what I installed last. I found out that having only NaviGraph in the Community already caused the SIM to crash. The SIM loads fine, and I can select the flight and click Fly. The load bar reaches around 30-40%, the MSFS music stops and the SIM crashes. Tested with other add ons and the Data Cycle works. This is with the latest SU14 Beta build and the latest NG Data Cycle.

I just purchased the A318 and cannot find the folder to the A318, but do see the folder to the A310-300, which I did not purchase. I wanted to know where to put the simbrief rte files into. Can the aircraft import those yet?

Hi, PC MSFS, Steam version: I uninstalled the A310 Enhanced and since then I have CTD every time I try to load the aircraft. Nothing else changed, nothing new was installed, nothing else was removed. I re-installed the A310 Enhanced but to no avail. I have the latest AIRAC, only a few addons, but I get CTD also in Safe mode with a default livery. I deleted flight plans just in case then I ran out of ideas... Before I never had a problem, it does look like uninstalling the Enhanced addition is the culprit. But it is installed again, so... Any ideas/advice more than welcome! I really like this aircraft... Thank you! Jure

Hi, Attached are my throttle config settings. Trying to use the reverser handles on the thrustmaster TCA throttle. The Eng 2 reverser works but Eng 1 does not. if I use toggle reverse it reverses both engines (but you can only bind it to one lever ) any ideas thanks Scott

Hello! Now SU13 is released I am getting a A310 CTD every time in aircraft loading (post hitting 'Fly' in the map screen) and have narrowed it down to being the 'microsoft-a310-american-n2291w' livery perhaps causing it? If I swap to other livery like something built in like WorldTravel then the flight seems to load ok. I get a CTD every time with the AAL livery so far.

Hey Inibuilds, first to say, i love your A310 and i‘m hyped for the A300. After SU12 i recognized the Camera for „Wideangel“ and „Landing“ has changed. Before Update 12 was the Landing Camera direct above the Instrumentpanel, now its like the normal Pilot view straight forward. The Wideangel was before Update 12 just normal foreward, now its slightly tilted downwards and zoomed in. My Question is did you change the angles in purpose or is this a Bug?

I have tried erasing and downloading the hame again and it hasn’t worked, it is not the AP Throttle neither. XBOX ISSUE WhatsApp Video 2023-09-23 at 11.33.06 PM.mp4