Support

Hi all I just bought iniBuild NZQN from the marketplace. It installed OK but I have the default buildings covering the IniBuilds. buildings I noted on this forum that it says I must have Photogrametry enabled. (I did not see this before I bought the scenery otherwise I would not have bought it) My question's are Must I have Photogrametry on as It really makes so much of the sim look dreadful What happens if I have it turned off? If there is no work around is there anyway of getting a refund or a credit for another product? I guess I should not have bought it from the marketplace? Thanks in advance if you can help. Best wish…

Hi, ive owned the NZQN for quite a while now and for most of the time Ive had it it has worked with no issues. However recently, my FS24 premium deluxe was automatically transferred to FS20 which i had standard for, and this automatically installed stuff including the 'Asobo Studio NZQN'. Now i do not know if this is the exact cause of the issue, because i have went into content manager and uninstalled it and the issue still remains, but I do know that i have been seeing this issue since then. The issue i am facing is that the airport looks like its merged with default buildings, and it 100% is not the NZQN airport I know. Please help, thank you.

Hello. I updated NZQN to version 1.0.3 today and the terminal (and some surrounding buildings) are overlayed with generic buildings (see image). It's as though the an exclude file is missing. I should note that the default NZQN has been removed, the INI scenery has been tested as the only product in the community folder and my rolling cache has been cleared. Any ideas? Thanks 🙂

Hello 🙂 Any chance we could get some GA parking spots added? I know this was discussed in 2023 and agreed for the next update just a quick prompt as its a pain spawning at the gates in a plane. Thanks, TJC

Hey ever since the patch that Asobo did for the NZ scenery in November, I've had default buildings showing over the top of the ini scenery. These aren't the custom asobo buildings, but the auto generated airport buildings. I've tried uninstalling/reinstalling everything including the asobo custom scenery to see if it had something out of whack, and now things are in a state of ini being installed, and Asobo uninstalled, and I'm still getting default airport buildings showing.

Hi Folks, Have been happly using this scenery only to find today that its no longer displaying properly. I removed/reinstalled same issue remains. I removed and reinstalled ASOBO NZQN and it works fine. Removed Asobo NZQN and reinstalled from the iniManager and still the same as displayed below. Any help would be appreciated.

Hi I searched for this topic to avoid creating more and posted there but as no reply is received I decided to create this one referencing my post Please advise

Good evening, First off, thank you to the developers at iniBuilds for all your hard work and passion for the sceneries you create. I own several of your sceneries for MSFS, and I think they are amongst the best you can buy. NZQN - Queenstown is no exception. That said, I need to mention that the iniBuilds NZQN scenery interferes somehow with the new photogrammetry for Queenstown in the MSFS New Zealand World Update. When I have iniBuilds NZQN enabled, a lot of the Queenstown 3d buildings vanish, making for a flat scenery; also, the elevation at the Skyline Queenstown landmark is messed up to where it really messes with the landmark. When the iniBuilds scenery is disa…

the Update had no effect. These anomalies disappear when you get closer... The Last View is WU12 without inibuilds NZQN.

The new update correctly adds the helicopter pads but there are no spots for GA which means spawning from the gates if you want to fly from there in a GA plane. Could we get some GA spots please?

With the new Update 1.0.1 there is a bump on the runway.

Hi, there is a problem with NZQN. I use World Update New Zealand with this scenery, and when approaching runway 23, there is a huge castle mountain like with spikes near the runway, and when landing, there is a huge bumb on around 1/3 position and another one close to the end.. The castle mountain like bug dissapears when getting closer to the airport (about 3nm). I removed the scenery and try back asobo escenery, and all problems are gone. I dont use Orbx Mesh, the problem was during simupdate 11 and now with simupdate 12 too. The version used is the latest. (1.0.1)

Hello I've seen that NZQN has been updated to v1.0.1 on March 4th to fix bugs related to the NZ World Update. This update was released in the iniManager however I purchased via the marketplace, will this update come to the marketplace please? Cheers

At zooming around from outside i get some short stutters around and i do not have this at your KLAX. And KLAX is huge in comparsion with NZQN.. Maybe you could do some optimations there ? Would be fine you guys could look at NZQN in case of this.. cheers 😉

Will there be any issues with NZQN and the upcoming World Update 12, out later this month?

Hi, I have become aware that as a Xbox X user there are limitations with respect to compatibility and functions of an Addon. For that reason I would like to ask in advance what kind of limitations I might face. I usually fly with your A310 and I own the premium version of MSFS. Since NZQN is already one of the "handcrafted" Airports in MSFS, what are the major differences and is your Airport compatible to that on XBox? Can I fly all the approches ILS/RNAV etc....Can I choose them in the FMC (A310)? Which Addons might interfere with you product? Thx for your time, best regards Felix

Good day, would it be possible to check the AI behaviour onthe runway? right now they are landing somewhere halfway and turn exit via the grass. For the rest a stunning scenery!! I am a Beta tester for AIG so if you would need some help I can ask it to AIG.

Hey there! Great scenery, love this airport and its approaches, however for some reason the simulator disconnects every time I'm on runway 23/05, be it taxing, take off, or landing. I've tried other airports throughout the day. If I start in NZQN, it'll disconnect as soon as I'm on the runway. If I fly from say, Australia the sim will be fine until I land in NZQN, then it disconnects. It's quite troubling in Landing, as I'll get a pop up which makes my button inputs stop working until I click on the thing. As I said, this only happens in NZQN since I installed, can I get a few pointers on how to go about this? Thanks!

Queenstown should have RNAV approaches (see: VATNZ Airspace - Airports - Queenstown (NZQN) for instance). But when on the world map selecting the airport no approaches are available? Is this an issue with the default NavData or with the scenery?

Hi! Congratulations on the release! Do we have to disable the stock Asobo NZQN for this addon? Is it possible/advisable? The reason I ask, is that I still get those two butt-ugly static airliners showing - even though I have static/airport traffic set to zero. They totally ruin the immersion - of what looks like a stunning addon. I have the ORBX mesh, BTW. Adam.

Have these problems mentioned in previous posts here been solved? I'm interested in this scenery but i sure would like to know the developer has rectified them.

Its been like this for a while. Someone please help me!

Hi all, I have recently purchased NZQN for MSFS on the Xbox Series X. Unfortunately I'm having a problem with the runway, there is around 4 or 5 right angle steps on the runway that makes it unusable. I have NZ Mesh installed and have tried it with it deleted but still no change. Any help would be very much appreciated as this is my home airport and I would love to be able to make the most of my purchase. Many thanks team, Stan.

Dear iniBuilds-team, I recently purchased your amazing NZQN scenery for XP 11 and I really do enjoy the scenery, especially since there aren't many good NZ sceneries out there for the simulator. However, there seems to be a mesh incompatibility with the one provided by Lyndiman (https://mildlyalert.wordpress.com/lyndimans-new-zealand-ortho-photography-set/), as mountains in the immediate vicinity of the airport are drawn incorrectly (e.g. mountains seem "cut off" in some areas). Will there be a fix available for this? That would be pretty neat, especially because flying in NZ without Lyndiman Ortho is like cornflakes without milk). Kind regards, Phil

Hello I purchased the NZQN scenery for X-Plane a few days ago and found that there are problems with the terrain. Basically the scenery around the airport is flat which leads to unattractive effects. I show this in the pictures below. One with Orthos and one with standard X-Plane. As you can easily see, the area is very flattened and the lake is tilted. I have already found a solution for this. You should remove the line "1302 flatten 1" from the file APT.dat in the folder "Path:\iniScene Queenstown NZQN\Earth nav data\". After that the terrain will be displayed correctly again. Flat Terrain Standard X-Plane. Flat Terrain with Orthos. …