Jump to content


  • Posts

  • Joined

  • Last visited

Everything posted by Captnchris

  1. Hello, thanks for reaching out. The snow in the pictures is XP12-specific generated snow by default, the scenery is optimized for XP12 to make it compatible with this feature. 🙂 In XP11 there are no snow effects or winter textures available for this product. Kind regards Chris
  2. Hello, thanks for reaching out! There is a pre-pandemic (or after-pandemic) version of the airport. The file is attached below. Just unzip, copy in your community folder and overwrite when asked. Kind regards Chris xometry-kvcv-victorville.rar
  3. Hello Matthew, thanks for reaching out. I'm involved in a few iniScene MSFS scenery projects, that's why the Xometry XP12 updates are delayed, I keep that in mind to update those as soon as I can, but unfortunately, I can't give you a time frame on that. Kind regards, Chris
  4. Hello, thanks for reaching out! It is completely normal behavior that the frames will drop a bit if you move the view to areas where more objects/clutter are placed. But interesting is how many frames you lose by moving the camera into those areas. As I can see in your log.txt, you have a strong GPU, so normally it can handle this scenery easily.. Can you tell me how many frames you have by default and by moving the camera to the terminal area? The scenery was developed and tested by using a GTX1070 without any heavy stutters. Kind regards
  5. Hello, thanks for reaching out. We checked this in our sim as well and everything was fine. It seems like something went wrong with your installation. Please make sure you have no other add ons/mesh add ons for this airport installed, as this can occur issues like this. Kind regards Chris
  6. Hello, thanks for reaching out. I've looked through the files and it seems like the SAM library isn't correctly installed. The log.txt tells Failed to find resource 'SAM_Library/dockings/marshaller.obj' which means that an asset from the SAM library could not be found. Please check if you have the SAM library correctly installed and make sure you use the latest version. Kind regards Chris
  7. Hello Matt, Yes KCRW will be updated to provide XP12 compatibility. I can't say an exact date but it's in the queue for the next months. Kind regards Chris
  8. @tomcanfly On occasion, please share your Ortho4XP settings before you start generating the tile. This may be helpful for troubleshooting.
  9. @tomcanfly Hello Tom, Let me discuss this issue with the colleague who made the mesh patch. I'll get back to you as soon as I have more information. Kind regards Chris
  10. @Opsman1628 Hello, thanks for your purchase. Here is a manual on how to use patches in Ortho4XP: Ortho4XP v.1.30 - Copy +40-080 inside your Ortho4XP/Patches folder. - Now you can generate the +42-079 tile in Ortho4XP using your preferred settings and the patch will ensure the airport terrain is as accurate as possible. Ortho4XP v.1.20 - Go to +40-080/+42-079 - Copy +42-079 inside your Ortho4XP/Patches folder. - Now you can generate the +42-079 tile in Ortho4XP using your preferred settings and the patch will ensure the airport terrain is as accurate as possible. Note: If you already have this tile built, you can move your existing tile back into the Tiles folder in Ortho4XP, delete everything but the textures folder, and then run Ortho4XP again, this will save a lot of time not having to regenerate the textures again. If you have further questions or need more support, don't hesitate to jump on the Xometry discord server: https://discord.gg/ggnHwHgqYq
  11. Hello, thanks for reaching out. I noticed that too and thought the problem had been fixed after my last test. I assumed that it was a typo in a texture reference. The texture is there, but the error message still appears, that's strange. I will go through the files again.
  12. @BRH Hello Günter, thanks for your purchase! Here is the missing mesh file for you: Kind regards Chris ZZ_Xometry_LPPD_mesh.zip
  13. @CJ_Reed Thanks for reaching out! We noticed that also and will provide some corrections and changed SAM jetways parameters with the next update. Kind regards, Chris
  14. Hello, thanks for your purchase! For the MFS version of KVCV there is only the pandemic, i.e. the current aircraft arrangement at the airport. However, we will discuss whether to release a pre-pandemic version as well. Kind regards Chris
  15. Hello, thanks for reaching out! Did you install the SAM library? Seems like your XP can't find assets of the SAM library. That's why the scenery is not showing up. Please make sure the SAM library is installed properly, these will make the jetways and marshallers work. Kind regards Chris
  16. Hi Matthew! Thanks for your kind words, I'm glad you like the product. The fact that the SAM jetways are connecting too deeply is a SAM issue and unfortunately, I cannot fix it. The jetways were set correctly for my part, but the fact that the jetways contact each time too deeply is related to SAM itself and not to the setting. I will take another look at the mesh issues you listed and then have our mesh dev fix them. Thanks for the hint! Kind regards Chris, Xometry
  17. Hello all, thanks for your kind words. We are glad you like the product. 1) We added a new version to the store which now has more ground traffic. 2) We will not implement seasonal textures for the time being, since XP12 will have a seasonal environment engine. We will check how this works and decide later if seasonal textures make sense. Happy Flying 🙂 Chris, Xometry
  18. Alright, happy you sorted it out! Have fun and enjoy CRW! Cheers 🙂
  19. Hello, @HomeReader Thanks for your purchase! I've never seen this issue. Are you using any other mesh add ons, orthos from other providers, or any sceneries for this area? It's weird since X Plane doesn't even generate such a power mast in this area by default. Please, check if you have another add on already installed for this airport. Kind regards Chris, Xometry Design
  20. @NukeTheGopniks Hello, thanks for reaching out! It seems like you haven't installed the included mesh file. Go to the included folder called "Mesh_Options". Inside this folder, you'll see three folders, but just focus on z_KCRW_Xometry_mesh. Put this folder into the Custom Scenery folder of your XP installation and start XP. Then quit XP, go to X-Plane 11/Custom Scenery/scenery_packs.ini. Now you should see two lines on top: z_KCRW_Xometry_mesh and Xometry - KCRW West Virginia Intl. Yeager Airport. Now change the order to this: SCENERY_PACK Custom Scenery/Xometry - KCRW West Virginia Intl. Yeager Airport/ SCENERY_PACK Custom z_KCRW_Xometry_mesh/ Save the file and close it. Restart XP and the problem should now be fixed. Mesh files must be always installed underneath the scenery folder. Otherwise, the scenery will not show up correctly. Hope that helps 🙂 Kind Regards Chris
  21. @MediumRareBaku Thanks for your purchase! The scenery is not compatible with VStates yet. But we are working on that and keep you updated if we found a solution! So long, please use the included Ortho4XP Patch or the pre-generated Ortho tile from the google drive link. Kind Regards Xometry Design
  22. @Licker37 Hello, Thanks for your purchase. I looked at your log.txt and it seems like you haven't installed the SAM library. This library is required to make the jetways and marshallers work. Please install the latest version of the SAM library properly, that will fix your issue. ---> SAM Library <--- Kind regards
  23. Version 1.0


    Welcome to Eagle County! This is a Static Aircraft Extension for the KEGE Eagle County Regional Airport payware scenery by Xometry. The screenshots above shows how the static aircraft extension looks like by using the corresponding scenery. Installation All you need to make this static aircraft extension work, is to copy the content (Earth nav data folder) directly into your KEGE scenery folder and replace if asked. Very easy! Please make sure you have following library installed: - MisterX Library For questions, answers, support or feedback, feel free to jump on my discord server: https://discord.gg/ggnHwHgqYq
  • Create New...