Support

The runway is very bumpy, and the cockpit camera is all over the screen when taking off. Are there any fixes?

It has problems in 2024, like snow showing inside the terminals, for one thing. It would also be ideal to have a version of this scenery without static aircraft taking up otherwise useful parking spots. With all the traffic addons now out there it makes no sense to have static planes everywhere and no way to get rid of them.

Hi, I've tried all combinations of installation (I have ortho4xp for West Virginia) and scenery pack ordering, and I can't seem to get the Nat Guard and parking lot cars to be at the same level as the runway and terminal area--they look to be about 100ft in the air. I had removed the XP11 version, of course. Thanks Any ideas for a fix?

Both KEGE (Xometry) and KDAL (YBlueYonder) are available on the Marketplace for MSFS 2024, but the Inibuilds App still shows "MSFS 2020 only". Does Inibuilds miss an update from the developers? Best regards, Hans Krismer

I just purchased and installed the Xometry KEGE scenery, then I have used a mix of xOrganizer and my own edits to correct the scenerypacks.ini file, and multiple configurations have just resulted in an empty, default tile in the sim without even an airport (screenshot attached). Using xOrganizer, I noticed it threw an error on the Ortho4XP_patch_KEGE_Xometry saying "error with installation or not a scenery package." I have attached my scenerypacks.ini and log.txt as well. Can anyone help? scenery_packs.ini Log.txt

@Captnchris Hello, I have a few questions regarding the KCRW XP12 scenery... 1. How do I get the jetways to move? I have the SAM_Library file in my custom scenery file but that does not do the trick. 2. I have provided a picture depicting an issue with the ground and I was wondering how I do fix this issue? At the end of the approach light system for 23, you can see the ground is not showing right?

Will Xometry be making a MSFS2024 update for KMDT (Harrisburg Intl)? This is my "go-to" airport for commercial flights. Tried to put the 2020 version in 2024 and it did not appear to be working. The default MS/ASOBO is not very good. I have the 2020 version and like it, but having completely switched to 2024, I'd love to have KMDT for theat version. Thanks

Hello, Just curious if there’s been an update on making the KCRW scenery compatible for XP12? Regards, Matthew Ede

I discovered an issue with the KEGE mesh for XP12 and Ortho4XP and AutoOrtho scenery. If i have the KEGE mesh installed then the ortho tile for the KEGE region does not show and I get default XP12 terrain showing. If I remove the KEGE mesh for XP12 then the ortho scenery tile shows but the airport buildings are raised off of the ground, so apparently the KEGE mesh is not compatible with ortho scenery. I did find a solution by removing the Xometry KEGE for XP12 scenery and installing the Xometry KEGE scenery for XP11. Is there by chance a patch for this XP12 issue with KEGE and ortho scenery?

my problem is the xp12 mesh file is missing something and it causes these floating objects, if i delete the mesh these objects still remain. any ideas for this? (I downloaded version x plane 11, but this file included in version 11 as well.)

It is downright unsafe to taxi at this airport. Can something be done?

I recently purchased a copy of KOKC for Xplane11/12. However, when I load into the airport, the buildings are sunk into the ground by about 10 feet. Is there a corresponding mesh file that goes along with this airport to correct this? Thanks.

Incredible airport! Frame friendly and gorgeous to look at, BUT please add a ortho patch, imo every airport with custom mesh should have a ortho patch included.

Hello, please tell me how to install the second file z_BIKF_mesh_xp12 (Xometry) after I purchased Iceland bikf airport on simmarket? IMG20231116221957.heic

I am quite disappointed to see that there is only a Pandemic version of KVCV in the MSFS store. I recently purchased the airport from the store based on the feature list stating that both pre- and post- versions were available. Please look at the MSFS store and advise. Purchase was today, 16 October 2023. Thank you. Steve

Hello, Just curious, if there is an update on the status of x-plane 12 compatibility for the KCRW scenery? Regards, Matthew

Hello, i have the KOKC Will Rogers world Airport By Xometry scenery for xplane 11 and 12 but im using 11 i noticed that oklahoma airport scenery has some performance issue im doing a fresh re-install of the scenery as i am making thing post,but everytime im changing my view my cpu work load going up and CPU temp raise from 47C to 60-70C with some stutters how can i fix it ?heres the log Log.txt

Hello! I have an issue with some signs "floating" well above the taxiway (A) going to RWY 07 and wanted to ask if this is something known or perhaps something I can fix? If I can provide any additional info, please let me know. Thank you for any insight, recommendations, or help! Regards, Mike i9-13900K 64GB DDR5-5600 RTX 4090 2TB Samsung 990Pro NVME Dedicated MSFS system Win 11 Pro

will this happen?

Hello, Just curious if this scenery will be updated to be compatible with X-plane 12 and if so, what is the time line looking like? Regards, Matthew Ede

Evening, I recently installed X-Plane 12 on my computer. I have not been successful with the installation of the custom scenery for EGE, my local airport. I went to your web site and got the update installed. Not certain it is installed correctly as there are three folders in the Custom scenery folder now. Did the SAM program download and extraction to the X-Plane root folder Based on not seeing the buildings I also figure the order in the “scenery_packs.ini” may be off. Not certain of the order and there are multiple line items regarding EGE. Copy included. “Log” file is also included. Per your request. …

Hi all, I've just installed the update to Eagle County, and now trying to build a new Ortho tile using the patch. I dropped the patch into \Patches\+30-110\+39-107. When running the script I've noticed the following error / warning: Loading elevation data and smoothing it over airports. Downloading ..\Elevation_data\+30-110\N39W107.hgt from Viewfinderpanoramas (J. de Ferranti). Downloading ..\Elevation_data\+40-110\N40W107.hgt from Viewfinderpanoramas (J. de Ferranti). * Min altitude: 1887.0 , Max altitude: 4384.0 , Mean: 3005.981 Patching KEGE.patch.osm Wrong number of nodes or non closed way for a altitude_high/altitude_low p…

I just purchased the Will Rogers OKC airport scenery and in both x-plane 11 and 12 it will not display and I get error messages on the screen but no direction as how to correct the problem

Just purchased KEGE. It works flawlessly and looks great un XP12. In XP11 I am not able to get it to load properly 😫. It appears that I am missing a vegetation Library? I have the same libraries in XP12 and am not seeing the same error. I have attached my log file and a couple screenshots to see what I am seeing. Thanks in advance, Kevin 0:00:50.741 E/SCN: Failed to find resource 'lib/vegetation/trees/deciduous/shrubs_small.for', referenced from scenery package 'Custom Scenery/Xometry - KEGE Eagle County Regional Airport/'. 0:00:50.741 E/SCN: Custom Scenery/Xometry - KEGE Eagle County Regional Airport/Earth nav data/+30-110/+39-107.dsf: 0:00:50…

Hi, I'm very satisfied with the BIKF airport, but sometimes I like to engage A.I. Flies Your Aircraft and just enjoy the scenery, I presume that I'm not the only one 🙂 If it's not much trouble for You to make taxi routes because now I must include the airport form "the other guy" which is not even nearly so good just to taxi to the active runway. Regards