richboy2307

Hi @ClanKilpatrick A. No. The 2024 Compatible Edition for now is only available for purchases made via inibuilds store (website or iniManager) or Simmarket respectively. You may request a permanent order transfer of your purchase to the iniBuilds Store using this form: https://inib.uk/order-transfer B. No. For Marketplace customers (PC/Xbox), as the FS 2024 Marketplace is not yet available, this is currently not possible unless you do transfer and make the upgrade via iniBuilds store after. As for Marketplace purchases/upgrades to FS2024 for Compatible/Enhanced/Premium editions of products in general, please see quote from below linked post: Thanks!

Hi @LukeFF The CPT side ET RUN/STOP buttons are mapped to L:INI_CHRONO_ET_STATUS, with a value of 2= STOP and 1 = RUN. The FO side is the same, except using L:INI_CHRONO_ET_STATUS_FO instead. Thanks!

Hi, please see linked post:

I believe it is INI_TILLER_DISC with values of 0 / 1 for pulled out/pressed in respectively.

Hi, Thanks team is aware of this one. The orientation of the lights was affected by one of the latest sim updates that changed some lighting properties. THanks!

Hi @SergioKlukas Can you please include screenshots with pointers as to what you're seeing? If you're talking about the N1%, the value at IDLE will vary depending on conditions, usually hovering around 20%. Thanks!

There is an LVAR list posted here for FS2020, I believe the same should apply for FS2024 as well: Alternatively, you can use the method mentioned further up in the post to access the Behaviours Dev menu and see switch-associated LVARs yourself live in the sim. Thanks!

Hi Thanks for the feedback, shared with the team. However for feature requests on Microsoft aircraft such as this, the appropriate place to post is on the MS Forums (Wishlist Section) as that decision rests with them. Thanks!

Hi, For more info see: Thanks!

Can you please share a screenshot (or preferably a video) of what you're seeing? Also please share your hardware (CPU/GPU/RAM) and sim graphics settings (Anti-aliasing mode used, resolution and cloud/texture/windshield settings). Thanks!

Please try loading into the aircraft now and see if you're still having the issues. Some of our testers reported the issue is no longer happening as of today. We believe it may have been related to the validity date format of this particular AIRAC cycle - the end date (23 Jan 2025) going into another year at the time this was initially reported (2024). However, now that we're in the same year, the issue is seemingly no longer occurring. We would appreciate if others could confirm the same. Thanks!

Yes that is an option, as long as both purchases are made via the same via the same account on inibuilds store (website or iniManager) or Simmarket respectively. For Marketplace customers (PC), as the FS 2024 Marketplace is not yet available, this is currently not possible unless you request a permanent order transfer of your purchase to the iniBuilds Store: https://inib.uk/order-transfer As for Marketplace purchases/upgrades to FS2024 for Compatible/Enhanced/Premium editions of products in general, please see quote from below linked post: Yes expect some delay due to the holidays. I've replied to your forum post here as well with additional info: Thanks!

Hi, Unfortunately as this process is not entirely in our hands, we cannot provide any ETA for update availability via the Marketplace. The transfer requests have to be processed by both parties (original store and ours) so can take some time. Ofcourse with holidays period in between, some delay is to be expected for both of the above. In case you do not hear back regarding your order transfer by end of next week (check your email spam folder), please reach out to Direct Support with your original transfer request info : https://inibuilds.com/pages/contact Thanks!

Hi all, As mentioned on discord: For PC users, the community suggested workaround to this issue is switching Texture Resolution to "High" or "Ultra" for now. Thanks!

Hi @Errandil It's a known sim issue we are tracking that looks to be on the MS/Asobo side. It is not limited to just streamed aircraft, but rather a rendering thing. There is a thread here on the MS forums that you should post to for maximum visibility on this topic. For clarity, nothing has changed build-wise between pre and post patch with our aircraft so we're looking deeper into why folks are seeing this from time to time. For PC users, the community suggested workaround to this issue is switching Texture Resolution to "High" for now. Thanks!

Hi @Powie I would start by looking for conflicting control bindings for brake axis, particularly right brake. Also check for any conflicting control bindings for rudder (yaw or trim) as well as nosewheel steering. Have not seen this at all during testing, nor reported elsewhere so chances of it being an aircraft bug are low. In fact just tried at LFMN (ILS Y 04L) and did not have any issues (well other than the LOC/GS misalignment with runway but thats likely a scenery/navdata issue) 2025-01-03 21-48-54(1).mp4 Thanks!

Hi @eschoyen Does this issue also happen when you spawn on runway? I have tried spawning in at the gates and airports mentioned with the DHL PW livery and did not notice this issue. I suspect the following On spawn your aircraft is somehow going into "pushback" state by default, likely due to some keybind. Check your control bindings perhaps? Alternatively, reversers are being toggled somehow initially before the aircraft resets to cold and dark on spawn. Have you calibrated your throttles from the aircraft EFB? Make sure you do that and select "Reverse on Axis = NO" Thanks!

Thanks reported.

Thanks, reported

Out now as of 1 Jan 2025: Thanks!

Yes that is what it seems like at the moment, especially for all the phases until cruise. Its possible the AI Pilot is taking over on final approach as well, but that is quite odd as I see the AP disconnect automatically. I haven't had such issues when I have tried. Also thanks for making the post on MS forums as well for their teams. I see you also mentioned the issue on this forum bug report, may I suggest adding the above videos there as well? https://forums.flightsimulator.com/t/ai-pilot-engages-in-cursor-mode-and-messes-up-flight/671715 As for the avionics freeze, can you please also make a video for that? Also please try to delete your StreamedPackages folder to see if you still have the issue after? Instructions here for console: https://flightsimulator.zendesk.com/hc/en-us/articles/17268168854044-Loading-issues Well, their teams have been away for the holidays, so expect some delay in response. I'd imagine most would be back in office starting next week. Thanks!

This is a new release, which offers all those things mentioned on the dedicated FS2024 version (v1.0.0 FS2024). What I meant was that in terms of the changelog, the "fixed" items are the same, i.e. the below bugs mentioned as fixed on v1.0.1 FS2020 are fixed on launch of v1.0.0 FS2024 as well. Thanks!

Thanks I've shared with the team, but unfortunately we weren't able to reproduce the visual artifacting on our end. Can you please add an additional video of what you're seeing on 2024? Thanks!

Hi @El_Comma English only please on the forums. Please only install one of the versions for FS2024 in your community folder: A300-600 Premium Edition (MSFS2024 Only) A300-600 Compatible Edition (FS20/24) Make sure you're using the latest version of the iniManager (v2.4.2). You can grab the installer from here and run it to manually update the app: https://inibuilds.com/pages/inimanager-v2 The latest version adds support for MSFS2024 by allowing you to define your MSFS2024 Community folder in the settings (top left corner, click your name to access). Press the 'Scan Now' button to populate the field automatically. Alternatively, you may use the '...' button to define this path manually. FS24 Default Community Folder Paths All addons installed via the iniManager are placed into these defined paths for MSFS 2024 and 2020 respectively. As long as this Community folder is recognized by your sim, the addons here should show up in your aircraft selection window. On the A300-600 Airliner Premium Edition Product page, you will see only 1 Install button which is for MSFS 2024 only. (Click to enlarge image) On the A300-600 Airliner Compatible Edition Product page, you will see 2 separate Install buttons for MSFS 2024 and 2020. They will each have their own Uninstall and Update buttons respectively. (Click to enlarge image) Thanks!

Hi, @LucaMost English only please on the forums. It's a known issue we are tracking that looks to be on the MS/Asobo side. There is a thread here on the MS forums that you should post to for maximum visibility on this topic. For clarity, nothing has changed build-wise between pre and post patch with our aircraft so we're looking deeper into why folks are seeing this from time to time. For PC users, the community suggested workaround to this issue is switching Texture Resolution to "High" for now. Thanks!