mark75

Yes, you're right, Just Flight guys told me to do a similar thing for their F28 (they posted an edited cameras.cfg on their forum) before they fixed it once and for all in a following update. Problem is that we will need to do this copy procedure after every A300 update and things would just be easier if iniBuilds also fixed it for the freighter variants, not only for the passenger variants where joystick hat left/right views are set correctly.

+1 IniBuilds fixed the joystick hat side views for passenger versions (I have asked for that on this forum some time ago) but forgot to do that for the freighters. Joystick hat views are not the same thing as custom quickviews.

Yes, took me a couple of hours of investigation and elimination but I'm glad I found it. See a few posts above. Definitely not expected, I had different suspects.

It was 7.4.10. I updated to 7.4.11 today and A300 works normally with this version for me, I've just tested it. So for me problem solved for now.

Ok, I've spent a couple of hours today trying to figure it out and I found a way that works for me... If I remove FSUIPC from exe.xml (programs started during MSFS loading) then FMC works fine, I can normally fill in FROM/TO at INI page for IRS align process and I can import Simbrief plan. If I put it back and FSUIPC starts with the MSFS then it doesn't work and does what I stated yesterday. It's a weird one, I know, but I've tried like three times with and without FSUIPC.

I'm not on SU15 beta. I never participate, just to avoid problems like these...

This just doesn't work for me. I deleted the work folder, I completely uninstalled and reinstalled the aircraft from iniManager, made sure that all folders from Community are gone and still when I start a new flight the EFB remembers my settings, my Simbrief name and everything. I have no idea where the EFB is pulling that information from. On top of that I tried to switch to Ready for takeoff panel state, the EFB says panel state set but there's no change, the panel state stays in the current state. It looks like the EFB doesn't communicate with the aircraft.

@Trevster I experience exactly the same. Everything was working just fine before 1.1.0. Simbrief import gives me empty boxes and manual typing FROM/TO does nothing. The ICAO codes just go to a black hole. I've been trying to figure this out for 3 hours now, deleting the work folder, restarting MSFS, trying PW passenger, PW freighter, base liveries and no success. It's driving me crazy.

See this thread: For me it's fixed now.

Now it's fixed. Thanks.

You're repeating yourself, you informed me about that in my original post. I don't really care what you do, it's your call. I only nicely asked iniBuilds to fix this. They did for the passenger version, so it would be nice to have it changed in the freighter version which was omitted. Please, do me a favour and ignore my posts, I'm not addressing that to you.

Hi, that BMW&AmSimKMIA installation problem still persists in the latest version. I reinstalled MSFS (because of an SSD upgrade), did a clean installation of KMIA v1.1.0, restarted the iniManager and still the airport is not detected as installed. In my opinion the problem is that iniManager still looks for the old folder name "bmwamsim-kmia-miami" that was used for the release version v1.0.0. Since then every update installs as "bmworldamsim-kmia-miami", so people who didn't manually delete the "bmwamsim-kmia-miami" folder when updating have two KMIA folders in their Community (and then iniManager is of course happy because it detects KMIA as installed). Please fix. Thanks

Hi, the camera positions for the joystick hat switches were fixed in the 1.0.3 but I've just noticed it was fixed only for the passenger version and the freighter version still has the views set too much to the rear, like trying to look at the wings. Can it be set left/right for the A300-600RF too? Thanks!

I manually deleted the first folder that was installed as v1.0.0. The name was "bmwamsim-kmia-miami". V1.0.1 is istalled as "bmworldamsim-kmia-miami".

Hi, BMW&AmSim KMIA was updated to v1.0.1 today but it installs a folder with a different name than v1.0.0 in Community folder (so there are two 4+ GB KMIA folders). So I manually deleted the folder with v1.0.0 and after I restarted iniManager it said that the product is not installed (probably because iniManagers checks the Community for a folder with the previous name that was used for v1.0.0).

Hi, well, I've tried to replicate that today but everything just worked fine. So it's a bit of a head-scratcher 🤔 Sorry for ringing the alarm, I'll keep my eyes open though 😉 Thanks for the awesome airplane.

You enter MACZFW from the Weight & Balance into the FMS as ZFWCG.

No, I've just tried to configure a different flight, from a different airport and everything went smoothly. Tomorrow I will try to replicate that previous flight when the error happened and will report back.

Thanks for the reply. I always load the FPL into the EFB as one of the first things after starting a flight. However, I usually manually type in my airways/waypoints, so I don't use the flightplan import in FMS. So I fill in INI page 1 then I fill in SID, waypoints, STAR and then I go to INI page 2, fill fuel block, ZFW and when entering the ZFWCG from the EFB weight&balance page game over, blank FMS and restart the flight. It has never happened to me pre 1.0.3.

Fixed in the 1.0.3. Thanks!

Hi, my first flight with the 1.0.3 patch and entering ZFWCG 27.9 into the FMS causes the left FMS go blank and the right FMS + FCU displays frozen. Any ideas?

Maybe but still, it's a simple request, I asked nicely and it would be great if iniBuilds set the views to the hat correspondingly to left/right views like other developers do.

Hi, can you please correct the camera positions for joystick hat switches left/right? It moves the views too much to the rear instead of just left/right. Thanks