Systems

Monitored Messages does not work. Msg Record List does not work. D-ATIS "Update All" does not update _A_ or _D_ ATIS, only NONE. Request Oceanic Clearance does not work. No Telex. Future Feature?

Hi everyone, my A359 doesn't save the automatic gpu disconnect setting. even if I set it to NO, every time I activate the beacons, the gpu disconnects and I no longer have the possibility to turn the airplane back on Cheers

"There are no issues up to x2, but x4 does not work at all."

After installation for msfs 2020 I can´t see the A350 in the aircraft selection. I uninstalled and re-installed again. no sucess 😒 Its correctly installed in the communty folder. What its wrong ? ok, solved by myself. Need to uninstall both versions (2020 & 2024) than re installed first 2020 and after 2024 again. Checked my installation path, but without reasons he installed before just in msfs 2024 and ignored 2020

Correct me if I am wrong, but the Autopilot seems not to be too precise in terms of keeping speed and often altitude during climb and descent. During cruise it seems ok. Example: I found the speed to be off the AP Input by a couple of knots quite often. The airplane seems to be trailing behind the commanded speed. Also, during descent, I found myself being about 1.000 ft above the vertical profile, however the AP apparently descended with the calculated rate and kept that 1000ft deviation (until it eventually cought up at a alt constraint along the route) instead of trying to be precisely on the vertical profile and descending just a little faster to get back on…

Only with the A350 i get the error message it isn't in the database, and when i go to choose SID for HTKJ it doesn't find anything and just blanks "NONE". It finds rwy 09/27 fine though. I am using 3rd party scenery but its a non issue (i think), since it works with the PMDG 777 just fine for example.

Hi, i just bought the A350 from the sim marketplace, and it show version 1.0.0 and states that everything is up to date. Afterwards i did download the inimanager and it states that version 1.0.1 is current. I have problems with the FMC wont let me enter any ZFW and Block into the mcdu. It kinda freezes. Maybe because im on an old version? Any one have a work around?

TCAS altitude shows -24 for both aircraft despite being at the same level. The pilot off the CPA813 messaged me to tell me that my level on their TCAS was being displayed as -24. and I was also displaying them as -24. Both planes were at 37000.

My TCA Airbus Sidestick has a slight offset with the calibration to the left. I noted that when flying the A350 with the autopilot engaged that the aircraft flies perfectly, but the aileron on the wing is slightly displaced from its neutral position as a result of the offset. In fact, if I slightly push the sidestick to the right, the ailerons go back to neutral position, but it does not affect the aircraft. I haven't seen this when flying any other aircraft so I'm assuming this may be a bug in that the sidestick controls are still active?

Lat/Long waypoints are displayed as FIX1 FIX2? Is this correct behavour for an A350? It makes it hard to know what actual waypoint you are crossing, or if you get a DCT TO, or to plan a step climb you have to match the FIXnn with the LAT/LONG.

Anyone able to offer some assistance with using ATIS wihtout being connected to VATSIM? When pressing Send nothing comes back. My Hoppie code has been entered in the correct box so don't think its anything related to that. Appreciate any help. Jason

When pressing the ident button within the aircraft via the FMS or the RMP the ident function is not activated on vpilot.

Hi all, I notice that the scroll bar couldn't be controlled by mouse drag when selecting SID/STARs, don't know if this is realistic but it will be great if we could have an option to enable this feature. Thank you for all your hard work!💚

ECAM mesage "ADS-B TRAFFIC ON" is always on, even if I turn it off.

who know solution this situation? Please help me Thanks

Wing and Engine Anti Ice has no effect.

CABIN READY still present at the gate

Hi all, Big fan of the A350 here 🙂 When I select a STAR, the aircraft doesn't know all the waypoints. Manually entering them is easy but obviously not preferred. Any tips? Happy landings!

Hi folks, Did my first proper line flight in the A350 today, which ended at TOC because the cockpit systems & displays froze (the sim didn't). I believe inibuilds are aware of the issue but I suspect I'll ahve to delay use of the addon until it's addressed. Other things I don't think are right: + enroute segment winds not uplinking (clb & descent does, seemingly) + aircraft not maintaining/achieving target speed in managed speed + pressing recall not bringing up 'NORMAL' status legend + sounds are really badly blended - it sounds like someone is playing them individually on a tape recorder behind me + sec f-pln can't seemingl…

Aircraft: A350-900 Simulator: FS2020 Navdata Method: SIM DEFAULT OFP: (Attached) WASM Error: WASM Error: WASM: Exception c0000005 in gauge MFD in module vfs://inibuilds-aircraft-a350/SimObjects/Airplanes/inibuilds-aircraft-a350-900/panel/inibuilds-A350.wasm Specs: i7-7700k // TUFGaming 1660Super // 4x 8GB GSkill TridentZ Other Notes: First [attempted] flight on 1.0.1. Prior to this, I updated via iniManager, and deleted WASM folder. I then loaded up aircraft for first time, which took 15 minutes. After that, because I spawned on another aircraft on VATSIM, I exited to main menu, then respawned at another gate, loading time aroun…

I've been experencing a lot of bug so far, but the main showstopper for me (makes the sim unusable in fact) is that if i switch to an external view and switch back to the cockpit, the mouse look/panning and zoom is disabled and there doesn't seem to be a way to reactivate it. This doesn't happen in any other aircraft, so it can't be a hardware issue. This is in MSFS 2020 with the latest update.

Keeps getting stuck on heading selection, nav doesn't work at all. Is this a bug? The whole FCU system is faulty, autopilot mode doesn't change whether I push it in or pull it out the knob. And why the FMC not showing the exact time to reach the waypoint or destination? The altitude is wrong also, it is supposed to show the current cruise altitude, not optimum altitude isn’t it?

After importing a flight plan from simbrief, if I go to the step alts and select the drop-down menu, no wpts are present. If I attempt to manually type in the step alt wpt, the entry disappears after pressing the enter key. If I attempt to interact with the kccu scroll wheel with the wpt drop-down menu open, the cursors on all screens freeze and are no longer usable without a sim reset. The crash seems to happen specifically when the scroll wheel is clicked. WASM: Exception c000001d in gauge MFD in module vfs://inibuilds-aircraft-a350/SimObjects/Airplanes/inibuilds-aircraft-a350-900/panel/inibuilds-A350.wasm Both Navigraph and Sim default data, FS2020, A359 …

I do not know if this happens to anybody else. When I try to alter the STAR/APPR (anything dest-related) on the FPLN, after pressing insert temporary, everything gets deleted. (IniManager A350 V.1.0.1) As shown here: After selecting the approach and arrival, they get deleted from this page: after pressing insert (fpln was loaded but replaced):

Dear All, I am running MSFS 2020 on an XBOX S series and wanted to check if there is already a date for when the A350 would be available for that platform? Appreciate your feedback Regards CS