Other

Hi, I have the A350 on Xbox series X, and we are currently on v1.2.2. Given that fact the A350 is virtually un-flyable on long hauls with the step climb/UTC bug, I was curious of when updates reach Xbox? With 1.2.4 recently being released, what does the time line usually look like for these updates to come to Xbox? I understand it takes some time for the updates to go through Microsoft, but I was just curious what that usually looks like. Thanks

Hello iniBuilds team My config : i7-12700F RTX 4070 super 32 GB ram DRR4 Issue : Whenever i load the a350 ( cabin version ) the performance is very good but after loading flpn the performance has drop from 50 - 40 fps and alot of sutter i have no idea how to solve this no traffic injection where used!

Good evening. I have recently bought the ursa minor throttle from Wingctrl. Calibration and controls are perfect but I cannot get the automatic backlighting to work. I'm asking because I have no issues with the A320 from Fenix. Thanks

On the same flight after 7hours WASM crash without touching anything. I love this airplane and I appreciate your steady work and improvement. But from today standpoint it’s worse than ever before. Sorry to say but this beauty needs to go to hangar until all is addressed to get back the fun. I know it’s Asobo too creating issues for developers like inibuilds, but hard to say I paid for it and would love to fly it again. thanks and best regards Andreas

Hi Ini team, I have been flying the A350 on a long haul route HKG-SFO ( Inibuilfs VHHH & Flightbeam KSFO) and I have found a weird issue of the FPS dropping to like 10-20fps on final approach. I dug around and found that the “Fauna” option off seems to making a bit better( I realise this is an MSFS option) giving around 15-20 fps on touchdown but the aircraft in general becomes a stuttery mess. General performance on the flight has been quite good with consistently 60+ fps but during final approach ( below 200 feet) it seems to all disappear. Interestingly, on the couple of flights I have done, I noticed that switching to the external view seems to be fine and t…

I'm on the SU4 beta and the ini A350 is finally flyable as I now get an incredible 80-90 FPS (post FG) even in EGLL with detailed custom cabin and BATC at traffic level 10. Previously I couldn't get more than 30 FPS in the same scenario. Many people are reporting similar performance boosts from SU4. Considering the reason that was previously given for not supporting sim rate >4x was "no system can handle that" - can this please be revisited? I'm still not using this plane as I don't have time to fly 12+ hours at 4x only. Other developers offer 8x and even 16x and they run perfectly fine on my system - even pre SU4. I could finally start using the A350 if there was…

Hi, I flew from Paris to Vancouver (A350-900) and the estimated fuel consumption on arrival was more than 2 tonnes different (much lower than expected). Is that possible? I’m using Simbrief and the profile available for this aircraft. Thank you

Hello, I just started a Flight based on my simbrief planning I used for all flights before last update. I‘m underway with 190to ZFW and remaining fuel of 55to. I‘m flying on FL350 and the fiel consumtion is between 7 and 7.5 to/h. It should be 5.8 - 6.2to/h. I have a tailwind of abouut 50kn. Something changed after last Update. 7to Plus is never correct for -900. any thoughts/ideas? BR Andreas

I recently brought the a350 on Microsoft flight simulator 2024 and ever since I got it I haven’t been able to change the fuel quantity from 9%. Whenever I change it, it instantly goes back to 9%. I have tried other methods such as putting it on unlimited fuel as a whole but that doesn’t do anything and I don’t know what to do now because ever since I brought the a350 I haven’t been able to use it

Since the last update, my MSFS 2020 always crash on loading screen when trying to load A350. I deleted WASM folder and re-installed the plane. Stil no luck. Does anyone have any solution to that please?

Hi all, I use a quest 3 for VR. Unfortunately after some clicks with the mouse in VR the EFB and the MCDU are not working anymore. At some point the mouse cursor is not reacting to the EFB and MCDU anymore. All other physical buttons work. As soon as I switch to 2D mode the touchscreens work again. Is ther any fix to this? No such problem in the A330/A340, Thanks a lot...

Are any of you using WNCTRL Airbus hardware? Are the Throttles, AGP, MCDU, FCU and EFIS panels functional in the A350? I'm new to this forum so I apologize if this topic has already been posted by someone else. Thanks. Pete L.

I see 1.2.2 has been released/updated tonight. Can I ask what’s been updated?

Hello, as stated above, I am unable to click and use the CDU and other displays when in VR using the VR controllers (Quest 3). Everything works as expected on the OIS. The cursor moves around just fine, but does not register any clicks (sometimes when you spam click it will register one click - but thats a 1/10 chance). Strangely this behaviour is not exhibited in MSFS2020. But this exact behaviour is also seen in the A400 in MSFS2024. Is this a known issue and will be fixed at some point? At the moment you are forced to use the mouse to interact with the displays which breaks immersion :/ Sim - MSFS2024 (Tested on both release and beta versio…

Hi, I seem to have created a problem that I cannot figure out how to fix. I was on the beta for msfs 2024,but the su5 bust my install with the only fix being a reinstall of msfs 2024. which i carried out. I'm now back on su4 and the sim is now working. I had changed the community folder name before uninstalling msfs 2024 thinking all i would need to do was to then rename again after reinstalling msfs 2024. Sadly that didn't work an i had to reinstall airports etc again. I also had to do this for the A350 but this will still not show up in my aircraft selection screen. I have tried uninstalling and turning the pc off before trying to install again but it mak…

Hi, Just purchase the A340 what a wonderful aircraft. I was configuring for my first departure (CYUL) and I notice that the Pressure and wind direction and speed was different in the EFB (the metar for CYUL indicate 03010KT, pressure 30.21 (1023)) in my flight option screen, but on Active Sky it was showing (60 @ 11 kts true, pressure 1019) . see attach picture My Flight screen My Active Sky screen I also check my OPS plan from Simbrief using the View Flightplan option and as you can see the weather info is simular as Active Sky and not with My Flight. When I upload the weather info in the takeoff option screen in the E…

After the last update, a problem that used to occur very frequently, though less frequently recently, has returned. After selecting a livery and airport, I can't load the plane in the selected scenery, and the loading wheel spins endlessly. After selecting a different plane, the problem disappears. I've read various strange methods online to "work around" this, but none of them actually work. Is the source of the problem known, and is there a proven solution?

Hello all! Been in love with the A350 on MSFS2024 since it’s release on Xbox. However I believe it occurred and has stayed the same since the last two updates but I have noticed the fan blades only move when the engines are off and the wind is carrying them but when you go to engine startup they freeze and don’t spin up. Any advice would help as I have uninstalled the game and the aircraft at least 5 times with no success. Happy flying all!

This happened after the latest update. I am on FS2020 The A/P then turn off and the aircraft goes in a dive. I had this problem on the very first release of this plane, but then it had been ironed out after 2 or 3 updates. But here we go again. It's frustating, I paid 68 € for this? I can't fly the aicraft with 4x acceleration, that means I should seat in front of the PC for at least 4 hours for a long-haul flight. It's unbearable. I can't accept it, especially because it looks like, instead of going forward, we are going backward.

Inibuilds - any indication of when the updated 1.2.1 might arrive for Xbox? Been almost a week since PC folks had their update.

Hi there, I just want to make sure I'm not missing something: I just installed version 1.2.1, and when I load a flight using any one of the Cabin Pack variants of the A350, I get a representation of the cabin, but no cockpit, no screens, no controls - the pilots are just hanging in the air. I assume this is not a bug, as it has been announced that the cabin packs will no longer be supported, so I assume they are no longer tested for compatibility when an update is made - right?

I apologize if this has been asked before, but I noticed that I cannot map any of those lights to actual switches, at least not in the way that will get them to work normally (flip switch up, light is on, flip it down, light is off) - I can set them to toggles, but that's not how switches are supposed to work. There also seems to be no way to map bat1, bat2, emer 1 and emer2 to buttons or switches as well. I was planning on making a partial overhead panel, but without these it won't really work. Am I doing something wrong or are these not properly mapped to action within the game that I can then map to inputs?

Hello everyone, So recently i bought the A350 Airliner but the game does not load, other planes do load but not the Inibuilds planes, i tried to re-install but nothing changes, please help!! I am using the MSFS 24!! Not only the A350 but every Airbus Inibuilds, some are standard from the game.

I have the following question. In most flights, after loading the SimBrief loadsheet, with ZFW ranging anywhere between 164 to 171 tons, I always see the ZFW CG value of 25,9% in the Loadsheet page of OIS. Is this what is supposed to happen? I would expect at least some spread. Alternatively - can I find the the calculated ZFW CG somewhere else? Thanks, Jan

Not sure if it's me or I have missed something, but since the latest update, I am now missing my taxi light. Any help would be much appreciated! Thanks.