Other

After loading an AutoSave file the top three MFD panels have incomplete displays... Is there a fix for this ? Running SU4 with latest A350 version... Thanks

Seriously? You recently updated the A350 and appeared to have solved the performance issues. just over a week later. SU4’s out. Awesome update but the A350 is back to barely 15fps. With Athena around 80fps what’s actually going on?

I updated to 1.18 and it is stuttering again; I gave up on this plane for a while. Then updated to 1.15 or 1.16 and it was running smooth. 1.17 came out was running the best it has since you released. You then released 1.18 and it is a shit show again makes me want to shelf this shit show until you learn quit breaking things in updates. I have a 4090 and 13900KS not bad hardware and using auto fps to help smooth things out. Why do you guys keep tinkering to break things? This is not the first time you have done this. Are you sure you know how to do this? BTW in a separate topic I should tell you about the A340 but you just released an update and it's hard to say which sid…

Hello, since a couple of weeks, the CPDLC functionality for my inibuilds A350 doesn't work anymore with BATC. It used to work before and I'm not quite sure what happened. I'm doing everything the way I did before, but after I select BATC as my ATC source and file for my PDC the message doesn't show up in BATC and I also don't get any response. I'm on the latest versions of the BATC experimental branch (v1.7.0 EA) and the inibuilds A350 (v1.1.8), respectively. I'd be glad for any help. Thank you and kind regards, Chris

Since a few weeks i get the a350 without a cockpit right after start. I Can start Msfs24 again, I Can reboot my computer. Nothing helps. What to do??

Every time I load the A350 its extremely slow, far beyond the normal initial load times. Currently passing 30 minutes loading, using the most recent version, cleared the WASM folder, and Ive already loaded it once before. Every load has been at least 15 min, initial or not. 2nd load of the updated plane has taken the longest by far. Not sure where to even start troubleshooting this one.

After the update, on takeoff roll the airspeed indicator will not indicate, right after liftoff the plane will go onto a steep climb, stall, roll over and crash to the ground. Uninstalled and reinstalled, all covers are removed (engine, pitot tubes, etc). Deleted WASM. None of which helped. Has anyone else experienced this? also, the specific airline cabins will not load and will not show the cockpit, they seem to be incompatible with the update. Jeremy

Hello, I am unable to uninstall the aircraft via the ini manager. I have manually deleted the aircraft files. Now 2024 version shows uninstalled however 2020 doesnt. Please can you tell me what I need to do? The aircraft has been unusable for me since the last update so I am hoping a re install will fix this.

As the title suggests. This has been an issue for as long as I can remember. VR controller interaction works fine with the OIS but not with the MCDU (it doesnt register clicks) and you are forced to use the mouse. Can the team please have a look at this? The same issue exists on the A400 btw. The FBW A380 MCDU which is similar works without issues using a VR controller btw.

Hi. Inimanager says i successfully installed the new 1.1.7 Update. But ingame the OIS says iam on version 1.1.0 Please help

I updated 1.1.7 but the cockpit and nose wheel are gone, and I try to restart my msfs2024 and nothing happens

Hi, I'm new here but thought I'd share some things that I've noticed since the 1.1.7 update. I've completed long haul flights from London to Hong Kong, London to Sao Paulo and currently Munich to Charlotte. The yellow efob warning doesn't pop up anywhere near as much as it used to, so that's a good start. However, I've had three CTD's so far. I still get the 'LDG perf affected' message whenever I throttle down to the climb detent after takeoff. I'm usually presented with a yes or no question regarding inconsistent ZFW readings just beforehand. Passenger cabin lighting is no longer visible from external views. At night the entire aircraft is…

Hello, I'm having a loading problem at Montreal Airport (CYUL). When I select the airport and a gate, MSFS loads indefinitely without stopping. I have the Montreal Airport scenery and I'm using MSFS 2024. Thank you for your help.

....not only that the Addon Cabins are gone, no, also the Co-Pilot on the A350-1000 is gone. Realy good Work!!

Hi All, I was wondering if there is a way to put a pilot in the Captain seat? I fly from the right seat, when loading the plane and starting in the captain seat I can see the First Officer. However when I switch to the "copilot" seat, I cannot see the Captain in his seat. Thx for any assistance!

I literally just cleared the WASM Folder, started the sim, downloaded the latest AIRAC and started prepping the flight. FP Attached! 1.1.6 MSFS2024 NAVIGRAPH 14900K, 4090, 64GB No AUTOSAVE as I had just wiped the WASM Folder to resolve earlier WASM crashes. Talk about bad luck! WSSSOTHH01.fpl

Morning guys, haven't used the A350 in a while but thought I'd do a flight from EGLL - HKJK yesterday . l however needed to use stop before TOD and opted for 30nm before. I came back to my PC having flown 60nm past the destination. Checked the OIS and the setting was still enabled

After some time, i choose the A350 to perform a longhaul flight EDDF-VHHH. After around 9h of flighttime, i run through the fms, showing the PERF page, i went on DES and want to have a look about the speed constrains, clicked the button and this causes a WASM crash. Very disappointing for me, with 1h of flighttime left to HKG i had to alt-f4. This was a IVAO Tour leg, so this leg was flown in real time with no time compression. I will not take the A350 in the near future again until these WASM crashes are COMPLETLY deald with.

The A350 hasn't been really performant since it's release, especially compared to the PMDG 777, Fenix A320 and even FlyByWire A380. I fly all of these planes and even with just 4k liveries and performance mode on (in the OIS), I get a noticeably lower performance and FPS in the Ini A350. The performance after starting a flight is not great, but flyable. After long haul flights I feel like it's getting even worse up to a point where it isn't fun to fly anymore. I'm talking about ~20 fps or less here. My specs: - AMD Ryzen 7 7800X3D - Nvidia RTX 4080 Super - 64 GB DDR 5 RAM 6000 MT/s When looking at the performance with other planes it's clear that the A350 s…

A350 been terrible performance wise in whole su3 + su3beta period. SU2 80-90fps (all fps with 2xFG) parked at (most) airports (no injected traffic etc). SU3 gives me 50fps. Thats 25fps with no FG! Fenix, Pmdg's, iFly around 100fps. Cleared wasm, nvidia cache etc etc. Time to do some performance optimization ini. Shelved it for now. Feel free to merge this post with apropriate thread, but strangely didn't find any. 5090, 7900x3d, 64gb ram, 4k(5120x1440), 2xFG, TAA, Ultra-High settings.

Hello Ladies and Gentleman any Idea why this allways happens? Maybe if the Aircraft is not 100% alligned to the Gate? Answers apreciated.

In a350-900 unable to open door 4L. -1000: unable to close 4L. Either not from Efb-ground menu or at door 4L.

If you are having issues with downloading, updating, or installing products via inimanager; this is what worked for me: 1. Download the current version of the installer (2.4.8) 2. Uninstall the manager. Also, uninstall any product installed from the inimanager 3. Go to your C Drive: Users/Username/AppData/Local (and also Roaming), and delete the iniManager folders 4. Press your WIN button and type in regedit, click on Registry Editor. Click on File, Export, and name your Registry Edit Backup and save it somewhere. I saved mine to My Documents just in case something happens. 5. You guessed it, you're gonna hack your registry (but not really)…

Hello everyone, Since the launch of the iniBuilds A350 for MSFS2024, I have only had 1 or 2 successful flights, after 10+ failed flights. I bought it on iniManager and have it updated. I have tried flying with A359, A35K, and the ULR but they all WASM crash, sometime when I am sleeping. I am talking about 14 hour long hauls. I have tried flying right after restarting PC and after having it running for several hours. Basically what happens when I am sleeping (it also happened once while I was there) is the systems and screens freeze up and the plane just starts going in WIDE circles and slowly descending. My drivers are updated. I have a i5-13600KF, RX 7800 XT, a…