iniBuilds

Could you post a video, as I don't have that issue at my EDDF. Thanks

You are trying to install into a high permission folder. Please run the manager as admin. Thanks

Nope that is the issue sadly... could be any of the scenery / ortho you have. Let me know if you find the one though as it will help other users! We've asked others before, but they didn't tell us.

You can copy your install... but fail that, re-install would be best

Are you using any custom scenery?

Yes please, thanks!

Hello all, It's been a fantastic year thus far and I cannot be more pleased to announce A300 V2 free update is now available and can be downloaded via the iniManager. To start, this update is FREE for all v1 customers. In our Discord and other places a lot of people have asked so why did it take so long and what did we change? Below you can find the full set of changes, fixes, improvements and new features found in the A300 v2. Flight model • Brand new FM for the A300 V2 vs the V1. Using new Aerofoil data on both the THS and wings. • New FM taking advantage of the experimental FM in XP. • New CG calculation allow for more accurate CG across whole flight envelope. • Landing gear travel range enhanced • More accurate climb performance in upper FLs due to custom system feeding engine thrust data. • Enhanced landing feel for even more accuracy. Systems ELEC • STBY generator function adjusted. Added function of self-test when on ground. • AC BUS1 and AC BUS 2 failure added ELEC system adjusted to respond to this failure • Dual AC BUS failure added system adjust to match this failure including loss of flight controls and slats and flaps. • LAND REC function adjusted and enhanced. LAND REC when pressed will now bring back correct flight controls and also bring back slats and flaps operations. • Flight on battery only items adjusted. HYD • Green Yellow and Blue system failures added. Along with dual failures. • Servo control failures added allowing flight controls to fail for a given HYD system but the rest of the system keeps functioning correctly. • HYD ACCU logic adjusted and enhanced. You can now empty the ACCU with parking brake applications meaning breaks will eventually fail to hold the aircraft. • ALTN BRKS function adjusted and enhanced. If brake system selected to ALT or ALT ON and no yellow system pressure ACCU will correctly drain and braking system will be powered from the yellow system. • SLATS and FLAPS jammed failure added allowing for slats or flaps to be jammed at any point. • Spoiler failures added. BLEED • Bleed output from engines adjusted and enhanced. Bleed output adjusted depending on demand from anti ice and packs etc. • HP/LP valve logic adjusted and enhanced to be more accurate. • Pack pre cooler temperature adjusted • ECAM SD page drawing adjusted to be more accurate. • APU bleed logic adjusted to correctly close HP valves when selected on. FUEL • CGCC target values adjusted and made more accurate. • General CG change from fuel movement to trim tank adjusted and made more accurate • Fuel auto feed logic adjusted and enhanced. • ECAM SD page drawing fully redone with new system giving much more accurate display of the auto fuel feeding process. • If CG outside of limits ECAM will be triggered and fault light shown on CGCC. • Trim tank can be filled on the ground via EFB FOB box. • MTOW adjusted to higher figure. This was done to give more flexibility on longer flights. • Trim tank logic adjusted with FWD feeding below FL200. ECAM • New ECAM system added to give more accurate results due to failures • Over 150 ECAMs now in for the A300 V2. • STS page failed items adjusted along with approach conditions. Such as landing distance factors etc. These are now included for many of the failures. • Door page remade to reflect the real aircraft more accurately along with slide arming and disarming. IDC • IDC added as an option, you can toggle this on and off in the EFB. • IDC allows for Hoppie integration and CPDLC functionality for some VATSIM / IVAO ATC stations. • CPDLC allows for free text messages to be sent between users and other aircraft and ATC. • Ability to request PDC from some VATSIM / IVAO ATC stations. • ATC MSG light added in flight deck along with correct call sound. • Message sent and received on the IDC can be printed and stored in the fight deck next to the CPT. • Keyboard input for IDC • IDC FREQ preset function added so you can store com FREQ. These are saved to a custom file and will stay after you close the sim. AFS • Single engine AP operation added. • Added custom controller for rudder trim. Rudder trim is manual when slats are zero after slats are zero rudder is controlled via the AP ENG • Custom EGT system that now more accurately reflects EGT at MCT TOGA and CLB. • More realistic cooling times and adjusted between GE and PW. • Starting time adjusted to make even more accurate on both GE and PW. • N2 / N1 ratio adjusted to make even more accurate. • Hot starts are now possible with correct ECAM given if EGT goes over set limit. • Custom oil pressure system added so oil pressure builds during cranking of engine. • Engine indications are no longer the same. 3D model and textures • Brand new PW 3D model and textures taken from the A310. • GE textures enhanced taken across from the A310. • Rear of aircraft 3D enhanced with new model for THS allowing full animation • Fuse length corrected • Nose shaped enhanced and window textures taken across from A310 • Brand new full cargo interior for A300 F allowing full interactive persistent loading of cargo containers • Brand new textures for fuselage with more wear and tear. This will change per livery. Sounds • Brand new GE and PW engine sounds based on the A310 • All switches and sounds assets enhanced from A300 V1, close to all the sounds are taken from a real aircraft with multiple recordings of each switch. • Cabin sounds enhanced and based on assets taken from a real aircraft. Failures • 70 custom failures added. Including Engine failures ELEC system failures and HYD failures. • Failure system added to the FMS to allow management of failures. EFB • Added landing distance module on EFB showing factored and non-factored landing distance for a given auto brake and weight combination. • Added Avitab integration to allow for chart viewing. Extra download found on forum needed for this function to work. • Takeoff data allowing more flap settings to be used on given runway lengths • Added autosave management via the panel states module. • Load sheet CG slider added, giving you the ability to set your own CG in flight and on the ground. • GE and PW engine toggle added, allowing you to change engine type after load in or during flight (not recommended) Autosave • Added autosave system from A310, this allows automatic saving a set intervals and also custom save states which are persistent. FMS • Constant computation of OPT altitudes to give more accurate reading during flight • Step climbs added. Only 1 step can be used during the CRZ phase as per the real aircraft • ENG OUT functions added to the FMS including ENG OUT service celling etc. • TRP FMS ENG OUT logic added. • Brand new LNAV taken from Beluga and adapted to A300 this system includes fully custom roll channel for the AP, allowing much higher accuracy when flying at higher FLs and during RNAV approaches. • Keyboard input added for FMS and IDC. As you can see a lot has been added, and for a visual demonstration of these changes I highly recommend you watch our Walkthrough video which covers a lot of these in a practical manner: If you don't own the A300 you can purchase it here: inib.uk/a300 If you are an A310 customer you receive a 25% discount on the A300. You can find out more here: inib.uk/a300-discount. NOTE: If you are a VR user - please contact us to access the A300 V1. At this time, VR compatibility is not available for A300 V2. We apologise for the inconvenience caused. Other developments We have made fantastic progress on the iniSimulations A310-300 ON THE LINE for Microsoft Flight Simulator along with a few other projects and hope to update you on these in the new year! In the meantime, enjoy the A300V2 update, and happy holidays. Kind Regards Ubaid

For those having low FPS on A310 please use the 2K textures and normal XP performance trouble shooting steps. Kind Regards

The Beluga will not have autosave feature. Kind Regards Ubaid

Not at this time.

Yes you can. Just drag and drop them out of the folder. Kind Regards Ubaid

Verticalsim you will have an option soon. Kind Regards Ubaid

Cleared up some of these comments: To summarise: - We had some server issues on release. No longer an issue. If you are struggling to login - please contact direct support. - Custom path installation is coming soon. - No, you cannot transfer ToLiss licenses. Verticalsim you can. We appreciate some of you would like to do it the old way, but the requests for an updater/manager outweigh this option. What we will do, is act on feedback and make this tool better and more useful for you. Kind Regards

There is no profile on departure. (VNAV). Only on the descent. When approaching your TOD, pull the knob with your lower altitude set in the FCU. You will see P.DES in blue on your PFD. This means its armed. When you reach your TOD, it should start the descent automatically. Alternatively toggling PROFILE when you approaching that point also initiates the descent.

If you are using Mac, remember to remove the config file.

yep! fix coming soon 🙂

Thanks for confirming Cliff! Kind Regards Ubaid

Hello! The team has been very hard at work in numerous areas of the business, and we are pleased to report on this in today's development update. iniManager As mentioned in last month's development update, this was timetabled for release in October. Our team on this is working very hard to make this a possibility, but release may bleed into early November. This is due to the resolution of some minor bugs in the Mac iteration of the application, and we want all customers to be able to access the iniManager from Day 1! Our apologies in advance, if a delay is indeed experienced. Once the iniManager is out, our Beluga update will be rolled out. You can read more on the improvements, new cargo models and other features coming to the iniSimulations BelugaST Aircraft here. iniSimulations A300V2: X-Plane I am very pleased to finally provide some images of our flagship aircraft; the iniSimulations A300-600R(F) V2. For those of you not familiar with this update I will summarize below: The A300V2 is a completely free update for existing customers that provides numerous improvements but also new features to the product based on feedback and the new technologies we have implemented into the BelugaST and A310-300 ON THE LINE aircraft. These not only include an enhanced and improved 3D model, but the complete implementation of a comprehensive failures package, CPDLC/ACARS integration and autosave; the latter 3 being very welcomed features in our A310 aircraft. This is in addition to the numerous bug resolutions and improvements in various systems. We have also enhanced certain areas such as the wingflex of the aircraft. Customers can also expect the new sounds first showcased in the A310 to come to the A300. We also have implemented a complete 3D Freighter cabin along with a highly requested feature of loading and unloading of cargo. As you can see from the images the textures have been completely overhauled and as with all iniSimulations products there will be a wide selection of liveries available on Day 1 of release from all sides of the spectrum; from super clean to dirty! We expect the release of this large and significant update before the end of the year. As mentioned earlier in this update this will be a free update even if you purchase the iniSimulations A300-600R(F) today. If you like what you see, you can purchase this aircraft here store.inibuilds.com as part of our Cross the Pond promotion sale which expires tomorrow! iniScene: EIKY (MSFS) & KSAT (MSFS & XP) Announcement! Earlier this month we released our latest scenery piece: iniScene Kerry Airport - EIKY Our high quality rendition for Microsoft Flight Simulator features a detailed terminal building complimented with a custom interior, accurate taxi signage, bespoke ground polys and textures along with much more to enhance your experience! You can see more info on this here. In addition to this we very pleased to announce our next project: iniScene San Antonio Airport - KSAT for Microsoft Flight Simulator and X-Plane. This airport is highly work-in-progress but has made some significant progress in the past couple of weeks! We hope to update you more on this as development progresses. iniSimulations A310-300 ON THE LINE for Microsoft Flight Simulator We are super pleased at our progress in Microsoft Flight Simulator and the development in some key areas of the aircraft. As always these images are highly WIP and do not represent the final product. Work on systems implementation, fonts, textures, sounds and flight modelling are in full steam and we hope to provide updates on each area in the coming months! Here are some more screenshots of some of the different operators of the aircraft! We have some work to do on the exterior, but its looking great so far! Thank you for taking some time in reading this development update and if you have any questions please do ask us and we will be more than happy to respond! Have a great weekend 🙂 P.S If you are a developer (FS or XP) please do DM me as we are always hiring! Kind Regards Ubaid

You have to align the IRS. Would you like further guidance on this? Kind Regards

Switch off the Jetway/GPU setting and it should be fine if you wish to continue using SAM3.

if the A310 is a success, for sure!

Yep!

Nothing outlined at this time!

We certainly want to! We just need the data..

You will still be able to download them from the forum, if you require it.