Support

Hey guys! We are working on a few things, biggest being performance and some more roads modelling airside. If you would like to see things done in a free update, please post on this thread! Many thanks!

Hello iniBuilds, since the latest version of EGLL the VDGS is not working. I checked the folder and the sim.cfg configuration file is there, but a manual scan of Nool does not add the VDGS to the library of Nool, thus VDGS is not working. Can you please look into this. There is also a topic about this on Avsim: https://www.avsim.com/forums/topic/643368-egll-vgds/

When departing EGLL in FS2020 I was able to see the white runway lights. After flying to Palma, on the way back the white runway lights were gone and the taxi lights kept disappearing as I got closer to them. This happened repeatedly. Please fix.

I have Ini EGLL, fully updated in MSFS 2024. I also have the latest version of Nool VDGS installed as of Sep 18, 2025. (7.0.3). But when I run rescan, it doesnt' pick up EGLL. It gets my MK Studios sceneries, but not Ini. I have seen the older threads that say to edit the layout.json and all.. but wasn't that supposed to be fixed? I don't want to follow a year old thread if it's redundant. How do I get VDGS working?

Hello. I have been looking everywhere for a decent afcad for egll with no joy. I have installed AIG aircraft and it seems the current afcad is way off with airlines all over the place where they should not be, the same applies to egkk. Have I missed something somewhere? I have seen this raised in the forum several times but with no resolution. If there is something would you be so kind as to point me in the right direction. It really spoils the immersion in otherwise great products. Thank you for your kind help. Best regards. Malcolm.

All the buildings dont load properly the sim is stuttering and completely unusable. I have unisntalled and re installed, deleted scenery cache and no avail. Jetways floating in the air and all sorts. Anyone can help? When you click on a gate to start from it just puts the plane anywhere it wants 🤷‍♂️

Good evening, More of a request than a support item, is there any way that left and right stands can be included in the AFCAD for Heathrow? I fly almost exclusively narrow bodies in and out of Heathrow for my Virtual Airline and am often assigned left or right gates which cannot be selected in GSX, are not properly supported by jetways ect. Is this something that can be included as an option even in a future update? Thanks in advance!

Hello All, I just purchased EGLL to go with my new Fenix A319 & A321, when I spawn at a gate the quality does not look good at all, It is impossible to use the safe dock as I cannot make out what it is saying and over all the textures do not look great. I have the high resolution textures selected in Ini Manager. I also uninstalled the default Asobo EGLL but it made no difference. You will see what I mean from the picture, even the gate number seems really low resolution. Anything I am doing wrong? Thanks in advance for any help

I purchased EGLL scenery from MS marketplace. I also have GSX pro. When the airport loads all the jetways (at least for Terminal 5) appear to be duplicated and overlapping. I downloaded the 3 GSX profile files and put them in the the GSX profile folder, but this didn't do anything. What am I doing wrong?

By default the jetway position of gate 239 is too far out. I can't follow the VDGS all the way in without hitting on of the jetways. You can also see that they aren't at their starting positions

Just installed Heathrow, there is no option to pick SD or HD textures, they are both blue, I checked the egll-modellib folder and there is only on 'texture' folder.

As the title says, since updating to version 3.1.3 I'm missing the pole to where the VDGS and standnumbers are attached. Tried varies GSX profiles because I thought that was the culplrit, but it doesn't make a difference. Reinstalling also doesn't work, neither does changing texture resolution from SD to HD.

No matter how often I reinstall I see what the attached image shows. I have to add that it's not only EGLL that looks like this. Most if not all of my airports have no apron/taxiways, just parking places. Any ideas on how to fix this ?

egll-iniBuilds-rwprofiles-0lliejs.ini egll-iniBuilds-rwprofiles-0lliejs-lite.ini egll-iniBuilds-rwprofiles-0lliejs.py EGLL-IniVkt.ini EGLL-IniVkt_GSX_VDGS.ini EGLL-IniVkt_Nools_VDGS.ini I am using MSFS 2020 GSX and I have noolaero VDGS installed correctly I also have MSFS 2024 EGLL installed , but don’t use much just yet, so I have removed egll-24-iniBuilds.ini egll-24-iniBuilds.py Also at EGSS I have egss-iniBuilds-gsxprofile.ini egss-iniBuilds-rwprofiles.ini It seems that there are duplicates and I am trying to clean up to prevent issues Any help would be greatly app…

downloaded the latest version of heathrow for msfs 2024 and i now have green red and yellow buildings and people in the terminals is there a fix please

With Beyond ATC's new traffic injection feature, planes are landing early on 09L (right at the start of the runway, instead of at the touchdown zone - see below). I spoke to BATC support, and they claim it's an issue with your scenery. I quote their response to me: "they put the start point of the runway at the end of the extended threshold then also specific the threshold length - that is not a valid configuration per the SDK. This is all done because they work around limitations of MSFS for the user flights - but it always breaks traffic"

Hi, unfortunately I bought EGLL over the market place and I saw that on my other products I can actually configure the airport in the Ini-Manager. The reason Iam bringing that up is that with both the Fenix and the PMDG I experience a smooth experience at EGLL except that there is a heavy freeze/stutter every 5 second approx. I have cleared dx/gl shader files, i have cleared rolling cache, in fact i do not use rolling cache at all. also updated nvidia driver etc. I have a pretty strong system and on other heavy scenery airports i dont experience that (tested several airports inibuilds jfk, corfu flytampa etc). BTW I also tried to turn off online functionality …

The papi lights in sim for runway 09R are in the wrong location. If you look in the sim the papi lights are next to the 500 foot markers. If you look at a YouTube video online you can see the papi lights are next to N7. (At the 1 minute mark) You can see in sim N7 is abeam the one thousand footers which is a much more normal location for papi lights.

BATC (Beyond ATC) is telling me that there is no gate configured at the IniBuilds EGLL to accommodate the newly released FBW A380. Is this an AFCAD problem? Can anyone suggest a solution?

Hello! I'm using the iniBuilds EGLL scenery with the GSX profile offered by the iniManager. When I choose boarding, refuelling or pushback I don't get offered a choice of handling agent - it aways defaults to Dnata. Is this the only handling agent available - surely the most appropriate handling agent at T5 would be BA? At other airports, I am always offered a choice of handling agent. Is there any way to change this? Thanks!

If I click at "HD Textures", in the .json-file there is use the SD Textures. So if you want to use th HD textures, ju must select the SD Textures.

I love the scenery, but I do not see people in the terminals as in the preview pics of the scenery. I did read that this may be adjusted by using the IniBuilds Manager, however I went into the Manager, and did not see that it even acknowleged that I have the scenery at all, and I think this may be because I purchased it through the in game Marketplace. Does this sound accurate? And if so, is there any way to activate the people appearing in the scenery / terminals? Thank you!

Xbox series X. I thought I had resolved the issue by reloading EGLL, however this was not the case. As you can see, the 1st picture is before EGLL is added, the second Is after removing it and the second one seems to have areas missing from the original world map images. Less of EGLL is showing, no gateways, no terminals, no Concord etc. I tried a further reload, however it just has the same outcome.

Hello, will there be a WU17 update anytime soon? Currently there seems the be a blend between low res satellite imagery provided by the EGLL scenery and the high res photogrammetry provided by the WU. There is also a lot of flattened photogrammetry around the airport now which is a shame. Hope to see this fixed soon considering how good London finally looks. Thanks in advance!

Nool VDGS is unable to find EGLL as a supported airport