Other

Hey guys, I’m a real life pilot and a simmer with some budget constraints. I found awesome that I could buy a Xbox series S for a reasonable price which runs FS2024. I bought the A350 and the Tristar and they are amazing aircraft. I really love the Tristar, is my new favorite aircraft. However, it’s a bit disappointing that in every flight I make, even when to and from airports are the FS2024 native ones, which the lowest vídeo quality settings as available, the sim runs out of memory and resets avionics. That really messes up my whole flight. I know my hardware is lame that’s why I don’t complain about video quality, but I expect at l…

Hi all, I am having an issue where the parking guidance in gsx does not work with the tristar. It's like gsx does not recognise the l101 icoa code as it does not show on the vgds even at the gate. I have the tristar profile installed and ground services all work ok but just no actual guidance to the stop positions when taxing in. Is this a gsx limitation or do I need to change a setting or profile somewhere? Any help much appreciated.

Buying this addon was the best purchase ever! Without doubt the Tristar was the most beautiful aircraft ever built. I loved working on these amazing birds and miss them! Anyway, I recently bought a new PC and have reinstalled all my addons including the L1011 but now I cannot access the cockpit. I've tried the usual 'shift C' etc but stay in the outside walkaround mode. The only way I can get into the cockpit is to spawn a flight on the runway then taxi to a gate and proceed from there. What am I doing/ not doing? I've looked at so many articles etc I can't see the wood for the trees!!!

Sample size of one here, but just noticed that the SimBrief profile seems to have a discrepancy somewhere. My planned ramp weight is 339,460 in SimBrief using the provided profile, but when loaded into the EFB it's coming out to 333.9k lbs and the auto-set of the weight totalizer on the FE panel is also reading 333.9. It also seems to be under-loading the fuel basd on the same gauge. I should have 43.0k lbs, which is shown in the EFB, but immediately after loading the aircraft the total fuel shown on the FE panel is 42.6k lbs.

Hello ini, I wanted to ask if the Tristar's enroute fuel burn performance has been vetted against real life performance charts. I don't doubt you have. However, I use not only SimBrief but also PFPX extensively. What I am seeing after keeping my navlog completely from start to finish on 9-hour flights is that, 1. The ini Tristar burns ~14% less fuel than the SimBrief profile 2. The ini Tristar burns ~ 9% less fuel than the PFPX profile Now, I'm not saying which of the three are right and I'm happy to adjust both SimBrief and PFPX accordingly. I've tried to source any cruise tables from the Tristar -500 to verify. Unfortunately, I can't find anything on…

Hello, I've been having an issue using the Thrustmaster Boeing quadrant and the throttle bindings. I have engine 1 bound to one throttle lever, and engines 2 and 3 bound to the other. These are assigned to the, "Throttle 1 Axis" on one lever, and "Throttle 2 Axis" and "Throttle 3 Axis" on the other lever. This works just fine for moving the throttles. They all respond as they should. I have reverse thrust bound to, "Hold Throttle Reverse Thrust". When I engage the reverse thrust on the throttle quadrant, only engines 1 and 3 reversers respond. When I disengage reversers and then attempt to move the throttles again, engine 2 seems to be unbound and will no longer resp…

Q: Fuel management , I am assuming 2L should always have their pumps on and 2R should be off for long haul till needed to overflow into the crossfeed tanks? "Ini please bring us a classic airport like KSTL with parked TWA aircraft ? or the old Denver airport ! 🙂

After spending a couple of days trying to buy the TriStar from MS MarketPlace that failed multiple times. A big thanks to a very helpful user, I was able to figure out that I need to the Steam Overlay enabled for purchase?? Weird (purchase and game overlay should be two entirely different constructs not related), but ok. So onto the next issue, there is no TriStar aircraft transfer option in iniManager? So how can I transfer? Rob

I have NO IDEA why you folks don’t just make it available via iniBuilds manager app? Microsoft’s Marketplace ALWAYS seems to have issues and why I avoid buying anything from the Marketplace whenever possible. Unfortunately you made it impossible for me to get the TriStar any other way. So, it’s been 20 minutes now with just a spinning please wait after I hit the Buy button. I can’t do anything … no Esc, no Cancel, nothing. So my only option now is to Task Manager and terminate MSFS 2024 … which means it will want to restart me in “Safe Mode”. Please, I love your products, but what is the point in making it difficult for users to purchase it? Is “no sa…

I am using the Honeycomb Bravo. I've calibrated my throttles in the EFB. Idle calibrated to idle, etc., but no matter how many times I calibrate them, once my Bravo levers are at idle, the throttles in the sim sit there and vibrate between idle and the beginning of the reverse range, and sometimes vibrate enough into reverse that the reversers unlock. I do not have any reverse bindings set in the sim and I do not have reverse on the axis set to on. I am not using the 0-100 axis option per the manual.

Anyone else having issues installing the update? Every time I tried to download it it would not install and just sit on the "Ready for install" screen. I uninstalled the plane and now when I try to reinstall it I just get "Installation Failed"

The Simbrief profile for the L-1011 seems to want to max out the fwd cargo hold first, and then put whatever is left in the aft and then bulk. Or at least how the sim interprets the loadsheet. In my scenario, KSLC-KDEN (short flight) I chose max payload, this gave 30.0klbs in the FWD, 5.5klbs or so in bulk, and I believe 1.6klbs in aft. This caused the MAC to be forward of limits, and I'm unable to adjust the weights in the cargo holds to bring MAC back into limits as editing the weights in each hold gets reset to whatever it imported from Simbrief. In my example, I left bulk alone but found half of FWD+AFT would be 15.8klbs, so I tried to put 15.8 in both, when hitting l…

I am struggling to connect to navigraph. It's a bit of hit and miss - mostly miss. Navigraph keeps telling me to retry but to no avail. Any ideas please? I get the message that navigraph has connected and that I can close the window - but it does NOT connect. Regards Trevor

How about to add a complete routeplan page to the pfb?Showing the whole ins route? Instead of just point 1-9 in the mid consol map..

Topic was merged with Programing hardware for Auto Throttle disconnect switches?

Hello Inibuild, Will the TriStar be available for direct purchase other than MS Marketplace? Thank you, Ed