Other

I had this WASM crash when I selected the departure runway in the FMGCS. To reproduce: Load at gate Power on aircraft (Battery, GPU) Import Simbrief OFP using OIS Load company flight plan Select runway (RWY 19 in this case, using DEPARTURE button) Systems freeze Information Aircraft: A350-900 Simulator: FS20 Navdata Method: NAVIGRAPH OFP: Attached Specs: i7-9700K, RTX 3080ti, 32GB RAM WASM: Exception c0000005 in gauge MFD in module vfs://inibuilds-aircraft-a350/SimObjects/Airplanes/inibuilds-aircraft-a350-900/panel/inibuilds-A350.wasm FACTEDDM_PDF_1740865389.pdf

The positions of the GSX vehicles for the lavatory service and the water service are still not correct. Since the update, however, the Jetway docks correctly to door 1L. When I want to refuel the plane via GSX, I always get a selection with different fuel quantities, but when I select one, nothing happens. Likewise, many more passengers are boarded by GSX than in my Simbrief flight plan. Can someone tell me how exactly I have to proceed to load the plane via GSX. I have uploaded the flight plan in EFB and the Loadsheet.

Hello, could someone please show me if I am doing something wrong ? I cannot see the A350 Update Button (in iniManager) - just info about the update itself. Please see attached screenshot. Thanks all.

Today I flew to LGSA. but there is only RWY 11 and 29 on the arrival page The STAR are also missing. But in my Navigraph charts there are 11L/R and 29L/R and all STAR charts are there. And I there is no airport map (ARPT NAV NOT AVAIL (NAVIGRAPH))

I have been able to popout the MFD to a 2nd small monitor, but I am unable to use it either via touchscreen or mouse. Is this something that will be implemented at a later date? The EFB, however, does work OK on a 2nd screen with touch input. MSFS 2020.

Hi. Loving the 350 so far in FS20. I have encountered a rather annoying issue regarding how keyboard input on the OIS works. I use | to switch to external view, and TAB to switch to drone. Ive mapped 1, 2, 3, 4, etc. as my camera views. IF Im on a page on the OIS that you can write on, eg LD PRF, and I quickly go into either a wingview (using 1,2,3,4 etc.) or drone, the camera completely freezes. Sim is running and I can pause. I believe it has something to do with the keyboard input, pausing the sims assigned actions. See attached screenshot. However, I cannot seem to find any workaround to fix this. The only "fix" is to RESET POSITION on the came…

Hello everyone, First day on MSFS (no 2024), after years on XP, just for this amazing plane. I installed the aircraft via iniManager, including some liveries, but I can't find the A350 among the MSFS aircraft. Any help?

Anyone having an issue with pushback? I am using remote GSX and when I remove chocks, GPU and turn the beacon on I select Pushback from the remote GSX menu in the EFP, I choose the operator, the wing walkers appear and that's it, nothing more. So I disabled the remote GSX and tried to use the pushback option in the EFB, says it's working, but the aircraft doesn't move. Now I tired the Shift P option and still nothing. If I turn the parking brake off when using GSX I get the GSX message to set brakes. Not sure if this is a GSX, iniBuilds or a me problem, most likely the latter 🙂

Had a WASM crash while preparing for descent. Adding fix info Aircraft: A350-900 Simulator: FS202424 Navdata Method: NAVIGRAPH OFP: not applicable WASM Error: WASM: Error during MFD_gauge_update execution. Error code : 0xc0000005 // WASM: Module vfs://inibuilds-aircraft-a350/SimObjects/Airplanes/A350/attachments/inibuilds/Function_Interior_A350/panel/inibuilds-A350.wasm is now dirty Specs: AMD Ryzen 7800X3D, 64GB 5200mhz, RTX 4070 Super

Hi. I am currently doing my first flight with the A350 in MSFS 2020 but no contrails are shown flying at FL380 and with TAT -31 ºC. I attach a photo. Why could this be possible? Thank you 🙂

Hi, I would like to report an incorrectly defined 1L DOOR on the A350-900 Verified on multiple sceneries.

G'day all, Pretty much the question in the topic. I much refer freight/cargo flights and I can't see anywhere if the new iniBuilds A350 has a freighter version. Many thanks Warwick

Do we really not have any word from iniBuilds about this disastrous release? Not an acknowledgement post and a word that they're working on fixing it because right now it really just seems like they took our money and left.

Dear: 1. I can't change Time Compression by key combi R and Ctrl Numpad Plus or Alt Numpad Plus. How can I do Time Compression? I tried from the EFB SIM options. Only x2 is available. x4 not possible. 2. In FBW A380, when I place the mouse cursor in ZFW field of the EFB, it shows the Max ZFW. But in IniBuilds A350 I can't see the max ZFW which I need to see when I don't use Simbrief. 3. During cockpit preparation with FMS, aircraft display freezes. I have to re-load the plane. Please help. Regards, Haseen Ahmad VGHS, Dhaka, Bangladesh.

I was on an ILS approach to KDTW, setup and stabilized. I inadvertently hit the ESC key taking me to the MSFS home/options screen. When i RESUMED the sim, AP had disconnected and the AT disconnected and the throttle mode was disrupted (even though i didn't touch the TCA).. it automatically put the plane into GO AROUND mode and the approach couldn't be salvaged. Is this expected or intended behavior? IIRC, the sim does the same thing in the Fenix, but you can reset AP and toggle the throttle levers back to SPEED mode and all is well. It doesn't seem possible to recover in the A350.. i've also had WASM crashes the last two flights but that's known so won't explain tha…

in the picture on the inimanager the Japan a350 had red faded winglets, in the sim there just white.

The OIS (and FMS blue value) does not show differences in VAPP Speed when switching between CONFIG3 or CONFIGFULL Landing. The landing distance required is increasing when choosing CONFIG3, but the VAPP stays the same (in my case 144 at arriving OMAA via 31L). I do expect a higher VAPP when selecting CONFIG3 in the landing performance calculator

Just bought and downloaded the A350 from Inibuilds Manager, on my product plane, is installled ,but not showing up in the FS2020?????

Don‘t know if it‘s a bug or if I do something wrong, but in my case the „next page“ button does not work on the GSX integration, if a Gate is not on the first page. I have to disable the GSX integration and do it through the normal GSX menu. kind regards Patrick

Hello Gentleman, First of all thank you for your effort, it really is a great piece of software. Taking it for its first spin i did have a problem that required the flight to be ended, as I was in CRZ at FL410 the aircraft froze at its current position, 0.4nm from TO waypoint, I could change views and cycle through them but no button actually did anything in the flight deck, when viewing from outside camera the aircraft kept moving normally… Info is as follows: KLAX-KDTW N569DZ, plane froze at the 00:54 mark. Any ideas? Best regards, Daniel

After playing around with this aircraft a little, I have noticed that the exterior model may need further optimization. I can easily pan my camera around with little lag when in the cockpit; however, when panning outside there are consistent stutters.

First, great work inibuilds!. Love the aircraft. There are two simbrief profiles available in the FAQ section of this forum and now there are also native inibuilds A350 profiles integrated in simbrief. Which are the correct ones/accurate to be used with your aircraft?. Thank you. Christian C./

Hi, MSFS2024.....I have SU1 installed, the aircraft loads okay but when I enter the cockpit with Shift-C, the sim freezes right away....unable to use ! Kind regards, Ben

I had this WASM crash when I switched between any WIPER position. (I was unaware they were not modelled when this bug happened) To reproduce Load at gate Power on aircraft (Battery, GPU) Switch WIPER button to any positions Systems freeze Information Aircraft: A350-900 Simulator: FS20 Navdata Method: NAVIGRAPH OFP: Not required, happens anytime Specs: Intel i9-12900KF , RTX 3070Ti, 32GBRAM WASM: Exception c0000005 in gauge Systems in module vfs://inibuilds-aircraft-a350/SimObjects/Airplanes/inibuilds-aircraft-a350-900/panel/inibuilds-A350.wasm

Hello! The problem with endless loading. I read an article saying that it can take up to 20 minutes due to WASM file downloads, but my loading has been going on for about an hour and is not going to stop! Is this normal? Or is it some kind of system error?