Bluu

Yeah it's honestly quite clear that the FS2020 version is so broken it might just be a straight file copy paste from FS2024 to 2020. It does also look like ini is just completely ignoring the 2020 version based on my own experience with pretty much nothing changing with these "updates" and nothing being posted on the forums.

Is it just on my end that stuff is broken or are all the sounds EXACTLY the same as release? I've tried a clean install of the plane and WASM folder clears and pretty much all I could think of other than a full game reinstall but nothing with the sounds has changed even though in the patch notes it's constantly said that there's been work on the audio.

I decided to disable it immediately when I got GSX just to save whatever performance I can. Didn't even test if it runs fine without it being disabled.

Yes I know but I'm waiting to hear if the settings I'm using are causing GSX to not work with my A350.

Any updates regarding this? Are my settings fine? Not trying to rush sorry I assume it is quite busy still with the A350 being so new still.

Here is my GSX simulation tab settings. It's mostly default from what I can remember. I'm somewhat new to GSX only have been using it for a couple months now so I'm not 100% of what are all the settings I should be using.

Updated GSX and now it won't even load more than 1 passenger apparently. I synced Simbrief everywhere you could so so in the aircraft. This is the Ground menu and Loadsheet after ~20 minutes of waiting. What setting from GSX should I send? Maybe I've got a little confused but atleast the console to verify a WASM crash was a little different in FS2020 compared to the FS2024 guides to do so but I could be wrong. The current ones do still get the job done but maybe for some it would be easier if FS2020 had it's own pictures as well.

Yes I know GSX loads progressively but even after after boarding and refueling has been completed the loadsheet says 0 passengers and 0% ZFWCG. The fuel loads fine and the aircraft shows the correct fuel. Every time I want to try and do a flight I just have to set ZFW directly from the loadsheet without GSX to get the aircraft loaded. Just as a little side noted. It is a little difficult to follow the official instructions to troubleshoot the A350 when all the guides and stuff are for MSFS2024 even for the 2020 version because the 2 simulators are a little different in some places.

When loading the aircraft through GSX the passenger number still shows 0/324 and the ZFWCG also shows 0%. Is this something that is being worked on or should GSX only be used for pushback then? Also to add with this edit that when pushing back the aircraft just froze. Can press buttons and switched but nothing does anything so even after 2 updates it is still 100% ununsable and not worth nearly 100€.

"Fixed - Tweaked engine pitch at lower N1" Did not notice a difference during startup and when putting throttle in "Fixed - Idle engine level tweaks" Still can't really hear the engines in the cockpit at all unless that is how the plane is in real life The engines on startup are still INCREDIBLY loud from the external view to the point that I can't even go to any external cams during startup without my ears hurting. There is still absolutely no ground sounds when taxing or rolling down a runway. The engine sound gets VERY loud between 60-90% N1 when taking off and then the engine are back to somewhat normal levels. Some sounds (engines mainly after taking off) are still coming from the very middle of the cockpit making it very uncomfortable to listen to when so much of the audio is only in the left or right ear depending where you are sitting. The volume control in the OIS still doesn't seem to do anything. A few days ago I downloaded MSFS2024 through game pass to test out if the plane is better in that game and all the volumes were fine with no fine tuning needed in audio settings. I don't want to talk bad about iniBuilds but how come the A350 works almost flawlessly in 2024 but in 2020 it's near unusable at points with a bunch of issues. It feels like they did the reverse of what people are doing to their addons. People are just copy pasting the files of their 2020 addons to 2024 and hope they will work which most of the time they do but for some reason I feel like iniBuilds tried the opposite. Copy pasting the SU1 2024 version of the A350 to 2020 hoping it will work which it very often doesn't. Again, I don't want to make it sound like I hate iniBuilds, I don't and the A350 is great when it works but the differences in product quality between the two sims is just strange.

I don't know why iniBuilds haven't included per livery config in 2020. Fenix and PMDG do it perfectly.

Ah okay thanks. Sorry if this post seemed aggressive I didn't mean to make it sound like that I was just wondering. Good to know that fixes are on the way.

Do we really not have any word from iniBuilds about this disastrous release? Not an acknowledgement post and a word that they're working on fixing it because right now it really just seems like they took our money and left.

A slight edit The plane is extremely quiet 90% of the time until some random audio cuts in and blows out my ears. After my first flight I noticed these sounds mainly are: A very small range at the beginning of engine spooling up or during starting up. Aural callouts. Some warning sounds. Outside of these sounds the plane barely has any sounds for me. No ground sounds, barely any audible engine sound outside of full throttle. No gear retraction or extension sounds, just generally a completely silent aircraft other than those few sounds listed above.

Oh okay great to know one is on it's way, thank.