Sounds
63 topics in this forum
-
Hi all, i am not longer hearing the flaps sounds in the cockpit after the latest update. Did something change here? Sincerely, Felipe
-
-
- 2 replies
- 199 views
- 1 follower
-
-
In 1.2.6, with AUTO THROTTLE DISARM key binds, autobrake disarms normally when single push on A/T disarm, showing AUTO BRK OFF orange warning on PFD and aural callout. Since 1.2.7, after normal rollout with autobrake activated, single push on A/T disarm only shows PFD warning for half a second, with single chime aural, but no AUTO BRK OFF callout. This behaves like the callout is cancelled by pushing A/T disarm button AGAIN AFTER autobrake disarm, to suppress the callout, according to A350 FCOM. However it now happens with only one push, which should only deactivate autobrake, not the callout. This issue is confirmed by 10+ flights after A350 1.2.7 updates, and still per…
-
- 1 reply
- 42 views
- 1 follower
-
-
The lovely flap sounds are back! But they make no sound in external view. They did before right? Anyone still on 1.2.7 who can check?
-
- 4 replies
- 159 views
- 1 follower
-
-
Air Conditioning sounds almost mute themselves whenever you print out an ATIS, Loadsheet etc. in the A350. I did a fresh reinstall and problem persists. Don't fly this plane until a V2 release if they bother fixing this.
-
-
- 17 replies
- 540 views
-
-
Hi, I downloaded the update to 1.2.7 and performed a flight today. I did not install your hotfix yet, so not sure if this already has been addressed: During descent around FL120, I extended the speed brakes to slow down. In cabin/wing view, I heard a sound similar to the ground/gear rattle during taxi. When storing the speed brakes, the noise disappeared. Is this already known? Thanks and best regards, Armin
-
-
- 2 replies
- 95 views
- 1 follower
-
-
In v1.2.7, the A350’s distinctive flap sounds appear to be present in the 2020 version, but seem to be missing in the 2024 version. Since I only recently started using the 2024 version, I’m not sure if this has always been the case. Will this be addressed in the v2 update for the 2024 version? https://www.youtube.com/shorts/diQbd4fyTs0 2026-10-24 17-43-03-00.25.14.678-00.25.44.579-00.00.03.498-00.00.21.428 (online-video-cutter.com).mp4
-
-
- 3 replies
- 193 views
-
-
Ok, so I’ve tried to understand the cabin announcements and what triggers them and get all different answers…haven’t found anything on the manual, and ALL I ever get is the “boarding”, “safety”, and “thanks for flying with us yada yada” announcements. Never anything telling flight attendants to prepare for takeoff / landing, never a captain address etc. the only thing I know to check is the pa button in the cockpit (got the sounds in cockpit now). Is there a list of what announcements I SHOULD be hearing and HOW to trigger them??? I’ve googled this off and on for a year…PLEASE inibuilds, settle this for me once and for all…HOW DO THESE WORK??
-
- 2 replies
- 459 views
- 1 follower
-
-
Hi dev team the a350 FO seat motor sound seems to be missing when moving the seat in any direction when you compare the sound made by the captains seat thank you
-
- 2 replies
- 334 views
-
-
Hello, I'm not sure if this is a bug but I noticed that toggling the NO MOBILE switch on the overhead panel produces no chime sound at all, even though the SEAT BELTS and NO SMOKING switches work fine
-
- 1 reply
- 392 views
-
-
Hi all, First of all, I just want to say that the A350-900 is an outstanding product overall. The level of detail, systems depth, and overall experience is genuinely impressive — easily one of the best aircraft available for MSFS right now. However, I wanted to highlight an issue I’ve noticed regarding the engine sound during cruise. At cruise altitude, there is still a very noticeable engine “roar” both in the cockpit and in the cabin. This is especially noticeable when seated over or near the wing. From my understanding (and real-world references), the A350 is known for being extremely quiet during cruise, with minimal engine noise — certainly not a conti…
-
-
- 3 replies
- 1.4k views
- 1 follower
-
-
I can't silence the MRK when at G intersection near rwy 10L. It's annoying listening to the beep while waiting your turn to go, when the airport is packed.
-
- 0 replies
- 411 views
-
-
Hello, first of all, I want to say that the new callouts are really well done overall. You can clearly tell that a lot of work and attention went into them, and most of the announcements already sound very close to the real-life versions. Big thanks to the ini team for that! However, I noticed that the “2500” callouts are still not fully accurate compared to the real ones. Right now, the ini version sounds more like a direct “2500”, while in reality it sounds more like a separated or stretched “2000…500”. That small pronunciation/detail is what makes the real callout sound more natural and authentic. Besides that, all the other calls already sound really good, which is wh…
-
- 3 replies
- 709 views
-
-
Hello, First of all, the callouts are pretty good, thanks to the ini team! But... The "2500" callout is not accurate compared to real life. The ini one sound like "2500" but in real life its more like a "2000....500". I put a example here in the topic. 2026-05-12 15-18-52.mp4
-
- 1 reply
- 745 views
- 1 follower
-
-
The other reverser topic got locked so I'm starting this one. Much like the engine roar during cruise mentioned in another topic, can the sound level of the reversers be looked at again? They are pretty quiet even at max reverse which does not seem correct, especially when seated at and/or in front of the engines. I am including a video here an A350 arrival into Perth and you can hear the difference. There is a loud rushing wind noise from the reversers just after touch down and that is from a vantage point BEHIND the wing. It would be louder at or front of the engines themselves. So can could this please be looked at and the volume increased? I realize it is small detail…
-
- 1 reply
- 681 views
-
-
Hi, as the title suggests, it seems like sounds from engine 2 are missing/not working correctly. Here is a video showing what I mean - listen to the audio and watch the commanded thrust: https://streamable.com/14u89l This is on 2024 SU5 beta, v1.2.3 Thanks!
-
- 4 replies
- 1.5k views
- 1 follower
-
-
Compared with previous versions, the flap sound is too low and gets covered by engine noise and other background sounds, making it hard to hear clearly. Please increase its volume to make the flap sound louder and more distinct.
-
- 0 replies
- 518 views
-
-
Hi everyone, I've been really enjoying the A350 in MSFS 2024, but I've run into a persistent audio issue during my approaches. I am getting a very odd, unnatural sound playing exclusively when the landing gear is extended. It sounds more like an audio glitch or a looping artifact rather than the expected wind drag or mechanical noise. To troubleshoot on my end, I have tried isolating the audio. By using the simulator's internal "Headphone Simulation" setting on and off. The strange gear-down sound persists regardless of the configuration, while the rest of the cockpit audio (engines, avionics, etc.) sounds perfectly fine. Has anyone else noticed this specif…
-
- 2 replies
- 898 views
- 1 follower
-
-
Hello, Just wanted to drop some feedback on the A350 . Overall, it’s an absolutely fantastic aircraft and you’ve clearly put a huge amount of work into it. One small thing I noticed after the recent sound update: during takeoff, especially if you advance the throttles fairly quickly from idle to FLEX or TOGA, the engine spool-up doesn’t quite have that powerful, rising surge you’d expect. It feels a bit too smooth/flat compared to the real-world “kick” or intensity you normally hear and feel during that phase. What stood out to me is that before the recent sound update, that stronger spool-up effect was definitely there you could really feel and hear the en…
-
- 1 reply
- 814 views
-
-
In the updated version the sounds for slats and Flaps 3 is almost muted now in the cockpit. I don’t know how realistic they were in the previous version, but I preferred being able to clearly hear 1+F and Flaps 3 deployment and retraction.
-
-
- 2 replies
- 1.2k views
-
-
It would be a problem because of the livery, but I uninstalled and reinstalled everything, and it's no longer selectable. It only works with the 1000 series. I also uninstalled the cabin and all A350-related apps in the app data folder. Can anyone help?
-
- 3 replies
- 3.1k views
- 1 follower
-
-
Since the update to version 1.2.3 there have been some weird issues when it comes to the 3D sound fading of the slat sounds in the cockpit. Before this version the slat sounds were clearly audible in the cockpit, with the Flap sounds being rather muffled (i.e realistic). As of update 1.2.3 and 1.2.4 the slat sounds are inaudible when positioning the camera in the captains or first officer seat. Yet when you move the camera near the glare shield the slat sounds suddenly pop in. Here is a video demonstrating this weird bug. (sorry for the low res due to file size restrictions) 0322.mp4
-
- 1 reply
- 2k views
-
-
I reckon Inibuilds have now nailed the thrust reduction sound from TOGA to CL power. But could the reverser sounds be looked at again? To me, they sound like a roll of instantaneous thunder, instead of an increasing whine/air noise. It would be great if that could be re-looked at...thks
-
-
- 9 replies
- 8.4k views
- 1 follower
-
-
Hello, First of all the 09,80,70 callouts are back, nice!. But. The callouts sound horrible to be honest, even more than they did since the last update. There are now three different voices of callouts, "Retard", "2500-100" and "90-5" sound completely different. Very unprofessional and disappointing... I was really happy when I saw the update but now im really, really upset. They sound like recorded on a toaster miles away. I dont want to disrepect anyone in the team but the sound team really should think about what they have done... Regards OnAirSIm
-
-
- 8 replies
- 7.8k views
- 2 followers
-
-
I understand the people complaining about the RA callouts quality, that wasn't good either but once again the tonality is all wrong The inibuilds sound team have once again stripped the callouts from those videos online of all the alerts and stuff, and they are mostly incorrect. Boris has made that mistake before, would be nice if inibuilds ever has to gather more references (not from a simulator) and record the loudspeaker with the ambience A minor thing to complain about, but here we are.
-
- 0 replies
- 631 views
-
-
twitch_1771498575303.mp4 Hi all, Since the last update 1.2.1 my cockpit callouts are almost inaudible, prior to this update i had no problem at all, i didn't even have to pull PA knob to hear them. Now not even pulling PA button with full volume, my headphones noise cancelling is always off and i didn't change any configuration on the sim, i can clearly hear the retard callout as always but not the rest, can anyone help me on this? is ruining my experience (besides lighting is nor working either) thank you all in advance.
-
- 5 replies
- 3.8k views
-