Modelling & Texturing

When using the rudder trim on the pedestal by selecting the Nose Left it will actually turn to the right and action the trim to the right instead and vise versa, by selection Nose Right it will actually turn to the left and action the trim to the left. Please have a look into it.

I saw it on the A359 and didn't notice it on the -1000

Dear Ini-Team when choosing the option "No Brake Fan" there is an issue on Wheel #1 (See picture below). It look´s like that the brake fan model is not switched off completely when you choose this option. Can you please have a look into this? Thanks in advance.

When I initiate a flight with the A350 in msfs20204 and I use one of the airline packs downloaded via die ini manager, the whole Virtual Cockpit is missing. No texture loads. The whole VC is "missing" When I use the default cabin OR no cabin, the VC is loaded normally

Hi Just wanted to let you know that the winglet texture is missing on both HB-IHF and IHC (liveries provided on the iniManager) Before any questions get asked 🙂, yes I did try both winglet variants but the texture doesn't show for any of them. They are just plain white. Additionally. The texture where the wind screen wipers are mounted is bugged and therefore purple. Please have this fixed. Thank you!

Hi dev team, I'd like to reiterate my suggestion regarding a minor but noticeable improvement. First, I must say that IniBuilds' visual effects are truly excellent, but I've noticed some animation effects that need refinement. For example, the cargo door opening animation. Due to the hydraulic drive, the door vibrates slightly upon completion, while current IniBuilds A350 and other aircraft animations only have completely linear opening animations, which look stiff and somewhat reminiscent of the P3D era. Other models, however, have the best animations available, so I sincerely hope the animations can be improved. In comparison, Fenix, PMDG, and even the free FB…

I am using v 1.2.1 for MSFS 2024 Store for PC. There is almost no heat blur exhaust gas emissions out of the APU. Anybody getting same?

It is possible there is a similar issue with the A359.

I wanted to fly yesterday, but when I loaded the A350 into the game, my cockpit had disappeared. This happened with every paint job. Everything else loaded properly. Unfortunately, I don't know what the problem is.

There is no left engine heat blur. APU and Eng 2 are OK.

Having jagged textures at night is a well known issue affecting AMD RX9000 cards but recently, with the January release of the AMD Adrenaline drivers (26.1.1.), this issue, at least from my side, is almost completely gone. Except for the Ini A350 where jagged textures are still present on the trailing edge of the rudder (starboard or right side) and on the leading edge of the tail (port or left side). No other planes in my library (I have all the existing airliners on the market) present this problem, neither the Ini A340 and A300. Only the A350 and this is little annoying because it's one of my favourite airliners. It was a driver related issue but I suspect that's also …

Hi, I am flying the A350 and noticed that the wing texture is visible on the fuselage at certain angles. It is from that specific angle shown in the screenshots. I am not sure if this has been reported before? I've also noticed on the A340 a similar issue though it is smaller. On that plane the wing registration floats below the wing. Also on the A340 if the winglet is in front of the fuselage, the textures seem to be offset, with them extending behind the winglet. it looks fine if the winglet is seen in the sky, but in front of the fuselage it looks off. (I didn't grab screenshots of that one.) Can this be looked into? Thank you!

Hello, for some time now, when I press stairs 1, 2, and 4 via the OIS on my Xbox 350, the plane doors open, but the stairs never appear. I'm currently on version 1.2.1 on Xbox. Are you experiencing the same problem? Thank you.

flap actuator pylon tip paint texture error flaps are uneven and the and gap between flap panels missing

Good afternoon, I'm searching for a long time how I can use the light in the passenger compartiment. In 2024 the compartiment is dark (see photo). The cabin light is on and bright. In 2020 there is no problem. Does anyone know a solution? Thanks.

Started a flight yesterday with the latest update v1.2.1. After two normal engine starts I went to external view and to my surprise the fans were not spinning. I searched the forum and noticed a topic regarding this issue. It's still not fixed after v1.2.1.

Hi, I just installed the A350 in MSFS2024 and get a purple exterior air frame (see picture attached). The cockpit is mostly ok.Thanks for reply Juergen Mader

Hi there. I have no idea how many people before me wrote about this however this is an issue that only started occuring recentyly and it realy hurts the eyes. Used to jetways always went for the closest door with L2 preference meaninig if it had range to both it chose L2. However recently no matter what jetway tries to connect to L2 eaven though it has no range. For example on the img (EPWA with a scenery) below the jetway was clearly closer to L1 but it still tryed to get to L2 i tried to fix it via GSX to no effect. This behaviour is observabel on any airport.

please fix the front left door because we cannot touch jetways..

I don't know if in the external view the cockpit interiors LOD is bugged or if it is missing but the draw distance seems way too short, I've compared it to your A320, A321 and A330s and they do not have the same behavior. Kind regards

Hi I have tried multiple clean reinstalls and tried different liviries but I am getting the same weird cockpit screen displays. I am using MSFS 2024 Delta livery. Custom cabins are uninstalled. Using default cabin. BTW earlier I had custom cabins installed and that had my cockpit missing altogether. I am not sure if the custom cabins have messed up some hidden files that I am unaware of. The version in use is v1.2.0 If anyone can help I would really appreciate it. Thank you

Any idea why this is happening, in msfs 2024 - have reinstalled the aircraft, delete the wasm folder, deleted shader cache, latest nvidea driver - this time 100 nm from decent in to wsss from kjfk

Hi Inibuilds, i'm having some trouble with all other 3rd party liveries that supports interior modeling. It seems like the textures are broken. I tested more than 5 different liveries downloaded from flightsim.to, all from different creators, and different types. It looks like every model is broken sadly. I'm not a person that can't fly with a broken cabin but recently i flied in the a350 long haul and i want to recreate it in the sim. I know its 3rd party related but i just think if 5 different liveries cabin model are broken, it could be the plane it self that are conflicting I'm using the latest version(1.2.0) Thank you

I'm curious. I removed one of the "LIVERY_ALBD--" files (as one does) from one of the liveries from inimanager and I got some insight on I presume the "texture and modeling techniques to bring crisp textures and detail at even the closest distances" that were mentioned in the Paint Kit Manual. Something that I can't find anywhere is what determines the placement of these I suppose "blank" areas that get filled in with a decal or solid colour, any info about it in the manual, nor have I come across any third party liveries that use this technique either. Is there anywhere I can learn more about this? How someone can use this in their own livery, if these blank …

Hello, I regocnized I only fly with copilot in 3rd Person View. 1.20 Version, WASM Folder was cleared after Update. Is this a bug, have I missed something?