Systems

I'm at OMDB and my aircraft is deciding to do the pull up GPS jamming stuff, however I am on the ground. Wouldn't the aircraft theoretically sense that, not once have I seen in cockpit videos atleast GPS jamming happening on the ground and I am not sure if it's realistic. Of course on flightradar24 there has been spoofing with planes teleporting all over the ground although I doubt they are getting pull up. I do feel the current GPS jamming is a bit bland as well, it would be nice if we get terrain ahead pull up with terrain popping up on the ND, as it's the same thing everytime.

Hi guys, I hope you can help because this issue is driving me mad. Everytime I extend the flaps to land on approach I hear the stall sound, then it banks to the left and goes into an unrecoverable spin. Usually between 1 & 2 but sometimes 1. Approach has been activated auto or manually just before the decel moment. At first it I noticed it when all modes were managed (speed, heading and altitude). Then I tried to manually select a safe speed, deleted my navigraph data via the hub, reinstalled it because I read somewhere that helps. Uninstalled the plane and reinstalled, deleted the wasm file. I don't why it always does it, it doesn't make sense and is really frustrati…

New to the 350 and I notice there's no DOT in the window. FMA is THR DCLB CLB ALT CRZ FLxxx (400). Any ideas?

Ver 1.2.6 with default NavData and scenery, it happened when I was doing a RNAV approach to FAOR RWY 03R As Airbus introduced, I initiated a soft go-around by setting the thrust lever to TO/GA and pull back to FLX/MCT without delay, but this somehow triggered a F-PLN erase, immediately I lost all guidance. The whole incident was recorded and uploaded to youtube. Please investigate this issue and feel free to contact me if more information is needed. Thanks Related topic (same runway but different approach): https://forum.inibuilds.com/topic/29138-go-around-behaviour/

hey there, I’ve been having a really frustrating issue with the A350 for the past month+ and I still haven’t found any real fix. Around 2–4 hours into the flight (usually during cruise), the aircraft basically freezes in terms of systems. The sim itself is still running fine, autopilot keeps flying but veers off the flight plan, and all displays are still on, but none of the buttons or switches actually do anything. Everything is clickable but there’s no response at all. I’ve already tried clearing WASM, restarting the sim, and I’m not using any extra mods. This also happens even on fresh sessions, not back-to-back flights. From what I’ve seen, this might b…

I encountered an issue where the refueling option completely went rogue. I requested 60 tonnes of fuel, and selected the realistic refueling option. Now the refueling will not stop and has even exceeded the maximum fuel capacity of the A359.

I know that we should not mix Beta version of MSFS2024 BUT, this is the first time I see that the A350 and 340 does not load. I It justkeeps loading forever. Of course I tried all like WASM cleanup etc. SU 7 beta Anyone else?

Seems after the latest update the jetway won't align anymore and GSX seated passenger didn't appear, anyone know what problem was it?

I really want to express my frustration with this situation. I started my KSEA > ZSPD flight last night around 11 PM (French time) at the controls of the iniBuilds A350. I simply wanted to give MSFS 2024 another chance. MSFS 2024's performance has long been disappointing, despite my high-end setup. Recently, I decided to give it another go, and for the first time in a while, I was starting to believe I would finally enjoy the simulator. Performance was solid. The flight was going beautifully. And then, while I was asleep about an hour and a half after takeoff, according to the flight tracking data....the WASM module crashed. When I woke up, I found several orange scree…

Hello guys! I have been experiencing an issue with the Airbus A350's (latest 1.2.6 build) terrain display on the ND, and I'd like to ask for help. The terrain display intermittently fails to initialize for an entire flight. When the issue occurs, TERR can be selected normally on the ND, but no terrain is displayed and the TERR indications remain: HIGH 0 LOW 0 The problem is intermittent. For example, the terrain system may work normally on one flight, fail completely on the next flight, and work normally again on a subsequent flight without any changes to the terrain database or aircraft configuration. When the issue occurred, I verified the following: OIS → 3rd Party sh…

Tried everything still cant update navdata why?

Hi all, After the recent SU 6.1 and Nvidia driver 616.64 update, I can no longer load the A350, the GPU hangs and then closes the sim. I have tried clearing the WASM folder, where the plane will load initially, but then hangs and I cannot enter the cockpit or interact. Same goes after a full re-install. Loads initially then hangs, any further attempts to load it results in the below message. Happens at all airports. No other aircraft I own is affected.

Hello, i made a plugin that sends TELEX (DATALINK) with AOC/ATSU (hoppie) format style for Preflight, Gate Expected..., it works with other addons like the A220, all WT G3000/5000 ACARS mod but in the ini A350, i'm not receiving any messages at all. Can the INI only receives CPDLC messages from hoppie ?

Maybe it is a known problem, but if I switch off all the external lights in the a350 and switch off all the electricity and engines, the navlights and red blinking lights stay always on. It would be nice if you can switch them on and off if you set it to cold and dark

My home setup has 3 monitors as well as the main large monitor. I can successfully pop out all the gauges, but the FMC page doesn’t recognise the mouse clicks on the pop out display, unless I go back to the main screen. The EFB works great as a pop out on another monitor, with mouse clicks working well, so it’s just FMC. Am I doing something wrong? Having the FMC on a touch screen monitor when popped out would be great for realism. Is this currently working? Thank you. Matt.

I found on some fora that people say that instrument panels cannot be popped out seperately and all 6 come as a single panel. I would like to pop out the pfd/nd to one screen, ECAMs to another and the FMS screens to a third somewhat like what I have for my Fenix a320. Also any AIr Manager panels for the overhead panel of the a350? Is this still the case? Every thread on this topic seems to have been locked so forced to start a new topic.

As can be seen on my FPLN page my TOD calculation is messed up, and causing EFOB at DEST to be incorrect and ETA to be incorrect. It keeps moving around also.

in fs2024 can the Captains and FO's VHF comm radios be independently tuned , and does VHF 2 work. mine are synced together and only VHF 1 seems to work on either. Im wondering if im missing a trick here?

I've flown the A350 previously when it came out. On a new PC and fresh install of everything. Configure flight plan and everything looks good. Take off from airport and turn on autopilot and the plane turns like it's trying to capture the NAV line and just keeps turning in a persistent circle. Decided to try to wake it up by forcing a direct-to for my destination and the nav updates with a turn and line direct to the destination. A350 follows the line for the turn and then again...just keeps turning. Plane is in managed NAV mode and I can see the proper destination/waypoint in the upper left of ND. I think I'm pretty good at flying Airbuses in the sim and this one has me …

Hello there. I have the latest version of A350 and The FMS still shows incorrect ETE/UTC times on the F-PLN page - current time is is different, and waypoints ETEs shows past times. I READ A POST BACK IN oct 2025 with the same issue and we are in August 2026 and this is the first time it happens to me. Any idea or fix? Thank you, Luiz

I tried to request the flightplan, the button grays out and after 20 sec nothing happens. the weird thing is in the EFB the simbrief import seems to work, when i plan a flight in the EFB flight planner the CPNY F-PLN does work, just not when i want to import a flight from simbrief. I tried - reinstalling the a350 - Clearing WASM folder - restarting sim - reconnecting 3rd party connections - Airaic cycle update unfortunatly nothing seems to work.

First time reporting, hope this is the correct place. To reproduce Load at gate C37 at KJFK Power on aircraft GPU, then APU OIS Loaded flight plan from Simbrief FMS lnit loaded flight plan and winds ND looked at Flight Plan, zoom in to ANF (KJFK) OIS loaded Navigraph charts OIS loaded Enroute chart OIS selecting KFJK Airport chart ... WASM Crash Information A350-900 Inibuilds default livery Note I had loaded the A350-1000 the day before, to set up navdata and OIS settings, no issues, this is the next day. MSFS 2024 v1.8.14.0 (new install, on fresh install of Win 11 25H2 Home) Navdata Navigraph OFP loaded from simbrief Specs 9800X3D, RTX 5090 (GRD 610.88), 96 GB Ram, tripl…

A350-900 - I have a very high-end system, and I almost never see a WASM crash. In the last week, while on an around-the-world tour, I experienced at least 6 different WASM crashes with this product. That is absolutely unacceptable. It is to the point now where the plane is not flyable. Basically, you have a product that is broken. What is going on here??

There has been no update for over 3 months.

I've just got back into the ini A350 after giving it a wide berth because of all the initial bugs. Planned a EGLL to VHHH flight which was superb up until approach (I really enjoyed the preparation, taxi, take off and cruise). Then on initial approach I was in CLB NAV mode with AP and AT all set then as I selected flaps 1 at the correct speed, the flight modes changed to HDG SEL and VS. I pushed the HDG SEL and ALT knobs and it returned to CLB NAV. The same thing happened when selected flaps 2, then again on flaps 3 and again on flaps full. It even happened when I was in APP mode on the LOC and GS with both autopilots engaged. Any ideas? I'm in MSFS2024 with the latest …