Johan217 Posted November 26, 2022 Posted November 26, 2022 On 11/25/2022 at 1:22 PM, gumbyger said: If you can open this website and it shows you a file then there is nothing stopping the A310 from importing the flightplan https://www.simbrief.com/api/xml.fetcher.php?username=XXXXX (XXXXX = your username obviously) Expand The url works OK for me as well as Simbrief import in other aircraft. But with the A310 I always get "pending" even with empty community folder and no other FS apps running. Specs: Win 10, AMD Ryzen 7 3700X, 16GB RAM, AMD RX5700, MSFS MS Store (not using beta), Navigraph Unlimited subscription, AIRAC 2211 rev2
TIGERM66 Posted November 26, 2022 Posted November 26, 2022 I have the same problem, no SB flightplan is imported. Always pending. my colleague can import flight plans with my SB name without any problems. When comparing the folders, I noticed that no XML file was created for me, but it was in my colleague's folder! That seems to be the problem
b3lt3r Posted November 26, 2022 Posted November 26, 2022 @TIGERM66which file and folder plse so I can look at my system too?
TIGERM66 Posted November 27, 2022 Posted November 27, 2022 it is the folder in which the simbrief.ini is located. My colleague also has a simbrief.xml that contains flight plan data. Which is probably generated during import? 1
ThunderBlaze Posted November 27, 2022 Posted November 27, 2022 On 11/27/2022 at 8:25 AM, TIGERM66 said: it is the folder in which the simbrief.ini is located. My colleague also has a simbrief.xml that contains flight plan data. Which is probably generated during import? Expand What happens if you simply create a simbrief.xml there and give it write access?
Johan217 Posted November 27, 2022 Posted November 27, 2022 (edited) Mine does not generate an xml either. I created one by downloading https://www.simbrief.com/api/xml.fetcher.php?username=XXXXX The header has this: <fetch> <userid>XXXX</userid> <static_id></static_id> <status>Success</status> <time>0.026</time> </fetch> <params> <request_id>62579521</request_id> <user_id>XXXX</user_id> <time_generated>1669542507</time_generated> <static_id/> <ofp_layout>LIDO</ofp_layout> <airac>2211</airac> <units>kgs</units> </params> userid is my numeric simbrief id. Is this what it should be like so that the A310 can read it? Or should it be username? Or alias? Edited November 27, 2022 by Johan217
Deleted Account Posted November 27, 2022 Posted November 27, 2022 On 11/27/2022 at 11:06 AM, Johan217 said: Mine does not generate an xml either. I created one by downloading https://www.simbrief.com/api/xml.fetcher.php?username=XXXXX The header has this: <fetch> <userid>XXXX</userid> <static_id></static_id> <status>Success</status> <time>0.026</time> </fetch> <params> <request_id>62579521</request_id> <user_id>XXXX</user_id> <time_generated>1669542507</time_generated> <static_id/> <ofp_layout>LIDO</ofp_layout> <airac>2211</airac> <units>kgs</units> </params> userid is my numeric simbrief id. Is this what it should be like so that the A310 can read it? Or should it be username? Or alias? Expand Afaik the A310 wont care whats in the header of the XML. We only need the username to access the xml and get you the correct fpl. Once your system can access that file though, I´d think that the A310 can insert the fpl
Deleted Account Posted November 27, 2022 Posted November 27, 2022 On 11/27/2022 at 11:44 AM, Johan217 said: So another dead end then 😞 Expand Not necessarily. If the sim still cant access that file to write the new XML into it, that would explain it. And since y'all didnt have that file to start with I'd assume this is actually our biggest lead.
M L Posted November 27, 2022 Posted November 27, 2022 is there some requirement that something needed to be started or installed as admin to enable appropriate permissions to write this file?
pacha35 Posted November 27, 2022 Posted November 27, 2022 (edited) Hi, several pilots in our group have try to charge Simbrief FPL, only the man who has the full Navigraph version (with Jeppesen maps) can use this function. People who have the basic version (only Navdata) can't use this option. Can you fix this ? The other aircarfts have not this limitation. Thanks. Edited November 27, 2022 by pacha35
fearlessfrog Posted November 28, 2022 Posted November 28, 2022 Perhaps the AIRAC has to be the exact same as the aircraft regardless of if the waypoints exists, which I think is 2211 in the A310? The simbrief.xml certainly contains the AIRAC version it's using. I'm using Navigraph AIRAC 2209 on a lapsed subscription currently, so maybe that it is?
Johan217 Posted November 28, 2022 Posted November 28, 2022 On 11/27/2022 at 10:22 PM, pacha35 said: People who have the basic version (only Navdata) can't use this option. Expand I have a full Navigraph subscription but also have the problem
b3lt3r Posted November 28, 2022 Posted November 28, 2022 On 11/27/2022 at 9:16 PM, M L said: is there some requirement that something needed to be started or installed as admin to enable appropriate permissions to write this file? Expand The permissions for the work folder look strange. It kind of looks like it's read only but it is not. Drilling down to permissions show that my user (the one I run the game with) has full permissions. In addition - the game can clearly write simbrief.ini in the same directory so there is not a permissions issue. Final point I think is that the retrieved xml is what the call to simbrief from the FMC would load as a fllightplan so really, lack of simbrief.xml is a symptom of the pending failure rather than a cause.
pacha35 Posted November 28, 2022 Posted November 28, 2022 (edited) At home, FS2020 has its Official and Community folders on a drive other than C:( which contains the technical files of the simulator including ...localstate...) Couldn't the "pending" problem come from there? NB: AIRAC is up to date on all my products. Edited November 28, 2022 by pacha35
Johan217 Posted November 28, 2022 Posted November 28, 2022 On 11/28/2022 at 9:04 AM, pacha35 said: At home, FS2020 has its Official and Community folders on a drive other than C:( which contains the technical files of the simulator including ...localstate...) Expand In case this could be a factor: I confirm I have the same installation.
b3lt3r Posted November 28, 2022 Posted November 28, 2022 Many things *could* be but as I mention above, the a310 is able to write simbrief.ini whenever I change the username in the ACARS. FWIW I'm on a Steam install with "...\work" on C drive and main install is on E with community in that hierarchy
pacha35 Posted November 28, 2022 Posted November 28, 2022 On 11/28/2022 at 10:19 AM, b3lt3r said: FWIW I'm on a Steam install with "...\work" on C drive and main install is on E with community in that hierarchy Expand and it works ?
pacha35 Posted November 28, 2022 Posted November 28, 2022 When Official is on another disk than FS2020, the localstate folder doesn't seem to be completely used, several directories are still empty. How do the other planes (FBW and Fenix for example) with which everything goes well?
b3lt3r Posted November 28, 2022 Posted November 28, 2022 On 11/28/2022 at 10:24 AM, pacha35 said: and it works ? Expand No - I am stuck in pending.
CaptainAB Posted November 28, 2022 Posted November 28, 2022 Experiencing the same issue and I’m also on the beta and I do have MSFS on a custom directory. So maybe that’s a trend? But not sure overall. I can’t get an XML file either so maybe this issue is caused by the permissions set in the work folder?
pacha35 Posted November 28, 2022 Posted November 28, 2022 I have tried to run FS in normal mode (not admin) : it's the same thing. But there is another problem with the ACARS page : if we want to obtain ATIS message, the FMS doesnot work after : it's blocked. I think this is a similar problem that "pending".
Deleted Account Posted November 28, 2022 Posted November 28, 2022 On 11/28/2022 at 11:41 AM, pacha35 said: I have tried to run FS in normal mode (not admin) : it's the same thing. But there is another problem with the ACARS page : if we want to obtain ATIS message, the FMS doesnot work after : it's blocked. I think this is a similar problem that "pending". Expand Yeah, that is a well known bug with the ATIS, I advise against using it. It´s already fixed on the official Beta Build in MSFS
pacha35 Posted November 28, 2022 Posted November 28, 2022 On 11/28/2022 at 1:18 PM, gumbyger said: Yeah, that is a well known bug with the ATIS, I advise against using it. It´s already fixed on the official Beta Build in MSFS Expand I have the official normal MSFS (40th, 2022 11 11) and the two bugs are inside (Pending and ATIS)
fearlessfrog Posted November 28, 2022 Posted November 28, 2022 (edited) On 11/28/2022 at 1:18 PM, gumbyger said: It´s already fixed on the official Beta Build in MSFS Expand That's a bit generous 🙂 as the fix was to remove the option all together from the MCU and just let the EFB do it. I see the beta build rolled out to all in MSFS now, so curious to see if it fixes it for everyone as 'Fixed SimBrief Import' is still in the release notes, despite it not fixing it for anyone (that had an issue to begin with anyway). I'll try again, as maybe the A310 updates between the beta and the release version. Edited November 28, 2022 by fearlessfrog
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now