cconesa

I did and the issue remained. Furthermore, some of the lower screens and overhead buttons won't work if used in conjunction with the "on the GPU" or "cold and dark" modes. There is something breaking the airplane when using your mod. A pity as your light fixes are great. Can you please check?

Yeap, I concur...

If you do some research on the net, you will find that this is a common issue with this type of aircraft (such as the PMDG 737) that use the "pump-off" setting in the landing gear. I used to have this issue and my work around solution (from another fellow simmer) is to create a new joystick profile (you may copy and paste the original profile as a duplicate and assign a new name to it) for the Boeing TCA yoke and then you delete any bindings to the landing gear associated with the profile. Thereafter, create a new binding for gear up (on press) and associate this binding with the up setting of the TCA Yoke, in my case it is button 18. Release the landing gear to the off position and create a new binding for gear down by pressing the switch to landing gear up but this time make sure that this binding is set to ON RELEASE. It may take more than one go for the binding to set as described (it took me three goes in my case, it is a known MSFS bug). Once you have set this binding correctly you should have: Gear UP: button 18 on PRESS Gear DOWN: button 18 on RELEASE That should solve the problem of the "pump off" gear selection.

Would you mind checking the steering being oversensitive to cross winds?. I few times I have taken off, whilst using the ground steering, the aircraft seems to veer too much to the right/left including when the rudder starts to take over the steering the aircraft. I have found that when using the rudder to correct the direction, when lifting off from the runway, the aircraft will lean over to either side too much. Thank you.

I did install it but then NAV&LOGO light 1 would not work (only NAV2). Any ideas?

I have pressed the ESC key to take me to the options screen and upon return to the FS, the AP is not disengaged but it is not working properly, and the aircraft will veer off course as well as overspeed / loose attitude control. It takes disconnecting the AP and pressing profile / nav again for the AP to work properly again. Can you please check it?. Regards, Christian C./

Could you be so kind to consider modifying the Left and Right views (POV L & POV R in the joystick) to actual LEFT and RIGHT views as at present using those commands get you Rear Left and Rear Right. Thank you. Regards, Christian C./

First, I want to congratulate you on the release of this aircraft. It is just great and once all the issues are ironed out, it set to be up there with the best. I love it. Please note that the beacon lights are still not properly aligned with the actual placement of the lights themselves (I hope it makes sense). They are somewhat sunk in the fuselage and even though the light reflections are correct, the light itself is not showing properly (both top and bottom of the fuselage). Could you check it, please? Regards, Christian C./

Is this a similar situation we are experiencing with the A310?

Out of interest, did you have the exterior light fix available at flightsim.to installed? (that is, prior to the release of update v1.01)

here's the description in the inibuilds installed: Optimised Texture Resolution Pack This additional package is the option of downgrading to lower resolution textures in exchange for a reduced VRAM usage for a performance boost on mid to lower-end systems

Already done so

this is the issue as I reported it: But be as it may, when the A310 does a CTD, the next time that I launch MSFS, I disable the cache and the A310 starts normally. And vice versa, if it is disabled, I enable it and the A310 will launch. Too much of a coincidence… And this is the actual thread in the MSFS forum (reported by several people): Loading the A310 leads to CTD - User Support Hub / Crashes (CTDs) - Microsoft Flight Simulator Forums

Will this faulty update released by MSFS also have anything to do with the CDT's I have been experiencing when starting the A310?

Same thing happens to me when using the stairs with GSX. Turning the damage off option may solve the problem but, in my opinion, it should not be like that. Can you please look into it?, Thank you. Regards, Christian C./

I have a similar issue going back to yesterday and tablet / buttons are not responsive. Have uninstalled and reinstalled but same again. Cannot even select GPU/APU or any other panel state. For some reason, the A310 is now broken. Regards, Christian C.

But we still have to rely on Inibuilds to correct it. As this is a product subcontracted by Microsoft, I hope they will resolve it sooner rather than later. We should post in the MSFS forum (which I have already done)

The more and more I look into this CDT, the more I come to the conclusion that it is somehow related to the rolling cache. If I get a CDT and next start I disable the rolling cache, the aircraft loads fine. After a PC restart, if I get the error, I do the opposite and enable the rolling cache. Weird. Christian C.

Hi, I have the same problem and it is a real pity that the A310 is unusable in its current form. As soon as I hit "fly", halfway through the loading process I get a CTD with no apparent reason. Does not matter the airport, stock or not. You get that every time. Sometimes, to get the aircraft started, I disable the rolling cache and it loads but other than that, I haven't found any logical reason why it fails to load. I am using a freshly installed PC with an up-to-date MSFS so it cannot be blamed on third party add ons. Every other plane in MSFS works fine. Please advise.

Hello, Maybe this has been asked before but why has the maintenance parking areas at the east of the airport (BA / Virgin) have not been enabled, parking spots assigned?. Will they ever be included?. All the best!. Christian Conesa.

Let me be the first one to request a repaint... Dragonair A320/A321 in their old colors for the latest version of the FSLabs AXX aircraft, please. Christian.