cconesa

This issue still remains following update v1.04 and is restricted to the optimised resolution texture pack. Can you please check and correct (perhaps a hot fix?). Thank you.

Hi, The background lights (indicators) for the ECAM display knob adjustments are not lit up as are other instrumentation around the center pedestal. Worth having a look if this is not intentional (see photo). All the best!

And this is what we have (over the shoulder views - joystick LEFT POV and RIGHT POV buttons):

These are what I would expect:

I have reinstalled and views have not been changed.

I think so, I was doing a quick flight yesterday and the left view is left/back and the right view is right/back. I suppose I could do a full reinstall to check in case some files did not get updated.

Please don't forget this item for the v1.04 wishlist...:

thank you for the heads-up!

Is it normal for the DH button switched on, to turn off the digits (three dashes) in the SPD/MACH display? Best!. Christian C./

And I have solved the mystery: the issue occurs with the optimised texture resolution pack. The main installation files do NOT have the beacon light issue (mind you, I had not reinstalled the optimised texture pack since v1.01, so if those needed updating, I was not aware of it)

And this is what I see: for me the bulb is not illuminated but the reflections do show in the fuselage (freighter / plain white version):

Sorry, Inibuilds, the top and bottom beacon lights are still not showing properly. The reflection on the ground and fuselage are fine but the light from the beacon itself is not appearing in the light mount. After 3 updates, this should have been picked up after so many posts on this subject. Other than that, the A300 is such a great aircraft!. Best! Christian C./

Many thanks, Nico. I have now created ISG15, IGS9 and IGS05 in absence of an IGS approach to RWY13 at Kai Tak on the FMC.

I confirm the same.

Yes, that's exactly what I meant. Using the FD in arc or rose mode show these colour combinations (which I believe may be wrong): ADF1 needle: Magenta ADF2 needle: Green ILS: Cyan with the center (ie course deviation from ILS) in magenta colour I'm pretty sure that ADFshould be cyan and ILS all in colour magenta

reply will be appreciated

Hi, Is there any way to disable the ADF needles in the PFD screen when using the ILS approach if the beacon stations are tuned?. Doing an IGS13 approach to Kai Tak I noticed that the two ADF's used (SL abd SC beacons) are shown in magenta and blue direction lines in the PFD but then the ILS line is shown as blue but the middle part as magenta, making it really confusing to aim the ILS patch properly. Is that how it is intended / real life?. In all the airplanes I have flown in FS, the ILS line is always magenta. Please advise, thank you.

Thx Nico, understood. With disused airports, it is al touch and go situation but hopefully you will introduce navigraph's data system to the FMC (I read somewhere that you are considering it) and should be a lot easier then. Meantime, I will try as suggested and see how it goes. By the way, are the user waypoints created in the FMC or are they edited outside the MSFS?. Actually, the mod I am using is a standalone package from flightsim.to (Kai Tak Intl. Airport (Stock Version) Navdata for Microsoft Flight Simulator | MSFS) that adds the navaids that are VHHX specific. As for the coding for the FMC GPS arrival to RWY13, would this mod have any direct influence in the FMC (I am not sure where the A300 picks up the navdata from)?

Thank you so much, Nico. What do you mean by PBD’s, is it something like user waypoints?, if so, how are they programmed? The IGS13 works fine (maybe because of the navdata mod I installed) and CH it’s also present but I have no data whatsoever on the FMC for the arrival to Rwy13. Any ideas?

Meant to say "navdata procedures for IGS13". Procedure for ILS RWY31 are included but not so for IGS13

Hi, Can you please advise if there is a navdata set that includes IGS13 for Kai Tak?. It would seem that this particular approach and its fixes are missing from the A300 database. Your help will be greatly appreciated. Thank you. PS: Great aircraft!

Thanks crabby!, was that even in the manual?. I would have never guessed that’s what you needed to do

Could someone be so kind to tell me if there is a way to select the altitude in the MCP in smaller units than 1000 feet so that I can select a level such as 15,400 ft, etc. At present I can only select altitudes in 1000 feet increment/reductions. Thank you.

I use Nvidia dlss

I owe you an apology, this was a case of me not RTFI and point 2 in particular, I was replacing the "systems.cfg" file with yours instead of copying the lights section only to the existing file. The mod works fine and I appreciate your work. Flightsim.to review amended to reflect the above.