[There are no ladders available on the a320 neo]

Yes this is a known issue, already fixed for whenever next update is available. Thanks!

[Inibuilds A320Neo freezes after alt+tab]

Hi @xEspada

I've been using the a320neo full screen, alt-tabbing multiple times without any issues.

Is it possible that you are accidentally clicking some data-entry field in the EFB whilst you are alt-tabbed?

As that causes the sim to be locked to in order to only take keyboard input for filling in the info into EFB.

When this happens, try to use the Camera menu from the toolbar on top to navigate to the efb instrument view. You'll note the red bar on the EFB if you're in data-input mode.

Thanks!

[No stair vehicle available]

Yes this is a known issue, already fixed for whenever next update is available. Thanks!

[The throttle is overly sensitive]

You still need to calibrate initially. There is no default calibration.

 

On the EFB, select REVERSE ON AXIS to YES, then NO. That will force-reset the calibration.

After that re-calibrate again. Keep REVERSE ON AXIS as NO if you are using a controller. Thanks!

[Sudden loss of control 2.0 (Plane falls out of the sky) Part 2]

2 hours ago, Saffa Jake said:

I did notice there was zero fuel in the aircraft as it was falling out of the sky but not sure how that happened as I lifted 20,594lbs of fuel as per Simbrief.

Please try to clear the contents of this work folder, to ensure there were no issues of older files not getting replaced fully. It will regenerate all these files next time you launch the A300.

Steam:

Quote

%APPDATA%\Microsoft Flight Simulator\Packages\inibuilds-aircraft-a300-600

MS Store:

Quote

%LOCALAPPDATA%\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalState\Packages\inibuilds-aircraft-a300-600

Thanks!

[IRS2 not going into align mode]

Hi @selkin

Please try to clear the contents of this folder, to ensure there were no issues of older files not getting replaced fully. It will regenerate all these files next time you launch the A300.

Steam:

Quote

%APPDATA%\Microsoft Flight Simulator\Packages\inibuilds-aircraft-a300-600

MS Store:

Quote

%LOCALAPPDATA%\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalState\Packages\inibuilds-aircraft-a300-600

Thanks!

[Three-position switch behavior]

The team is aware of this issue, primarily in legacy interaction mode. It's an issue with Asobo's switch template that we're using for optimized performance.
It affects most 3-way switches. We're looking into it.

Thanks!

[FMS Progress Page displaying tuned VOR/DME stations]

Hey thanks for the feedback.We'll look into this.

[VDGS version 3.1.0]

Hi @ApolloBlackCat

Not as yet, it is on the list for next update. For now to restore NoolVDGS please do the following:

1. Find your Community folder and inside look for iniBuilds-airport-egll-heathrow folder. Here you'll see things like the layout.json file that you need to edit.
   
    
2. In it go to SimObjects > Landmarks and there you'll see the noolaero-vdgs-egll 
   
    
3. Rename noolaero-vdgs-egll  to noolaero VDGS EGLL
4. Then go back to iniBuilds-airport-egll-heathrow and update the layout.json  (either manually in notepad or by dragging the .json file on top of MSFS Layout Generator.exe tool)
5. Finally, run the Noolaero app to Rescan devices. This time you will see EGLL populate in the list.

Thanks!

[The throttle is overly sensitive]

56 minutes ago, Мартыненко Борис said:

During TAXI, I would like to add a bit of power to the engines in order to increase the speed. I press the "A" button on the joystick, and my engines switch to CL or FLX/MCT mode

Please Calibrate your throttles in the EFB using the guide below:

[Chocks in the EFB won't release if the flight is restarted for inibuilds A320 Neo V2 in MSFS windows version 1.37.19.0.]

Hi @Scott Wongsanguan

Thanks for sharing the video!

Hmm, we're not able to reproduce this issue on our end. Please try to clear the contents of the folder below, it will re-compile these files next time you launch the A320Neo v2. Also ensure you do not have any AI Assists enabled (Options > Assistance Options > Piloting) that may cause conflicts.

Steam Edition:

Quote

%APPDATA%\Microsoft Flight Simulator\Packages\microsoft-aircraft-a320neo

MS Store Version:

Quote

%LOCALAPPDATA%\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalState\Packages\microsoft-aircraft-a320neo

 

Thanks! 

[Chocks in the EFB won't release if the flight is restarted for inibuilds A320 Neo V2 in MSFS windows version 1.37.19.0.]

Hi @Scott Wongsanguan

I have tried your steps multiple times and unable to reproduce the issue on our end. Attached below the recording of one of the attempts:

Please ensure there is no conflict with other addons. If you are on PC you can do this by closing the sim, and renaming your Community folder to "_Community" temporarily. Launch the sim, test and see if the chocks are working properly. 

After you are done testing, close the sim and delete the newly created empty Community folder, and rename the "_Community" folder back to Community. This will restore all your installed addons without having to reinstall them.

If they chocks are working fine with an empty Community folder, then there is likely a conflict. To avoid this update your installed addons and do some further testing to find out which one may be causing an issue for you.

Thanks!

 

[A320neo update]

Hi @giorgi

Work is on going on both simultaneously, however as the A320Neo v2 is a Microsoft product, it is largely up to them to showcase or share any information about that aircraft.

Thanks!

[Aircraft stuck in place after landing]

Hi @Bald kelp

Sorry, there are no known bugs/issues with the brakes.

It is common that the brakes will heat up after you use them. The less you use them, the less they will heat up. If you have enough runway available, you can tap your brakes to disengage them at about ~90 knots, and use manual braking as necessary to stop after.

After landing (or when you get the HOT BRAKES alert) turn on the BRK FAN by clicking this button here:

This will help to cool down your brakes after they have reached thermal equilibrium (or peak temperature). 

Thanks!

[Cabin pressure control system does not take into account landing field elevation]

Thanks we'll look into it.

[XBOX Issue, Simbrief loading Old FlightPlan]

3 hours ago, RosstheBoss said:

but the tablet kept loading the old one!

On the EFB you'll see an option for the On-Screen Keyboard. Enable that and enter your your Simbrief Pilot ID using that within the EFB.

Do not use the Xbox Overlay keyboard as it doesn't actually register the input, even though its seen on screen.

Thanks!

[XBOX Issue, Simbrief loading Old FlightPlan]

Hi @RosstheBoss

Sometimes Xbox version of MSFS fails to initialize the proper connection required to download the necessary files from Simbrief servers. If you are facing this issue, please restart the sim as that will force it to re-initialize.

You could also try to delete and add your Simbrief Pilot ID in the EFB and MCDU again. Thanks!

[RWY 22R Full Length Not Recognized]

Thanks for your report. Its noted on the bugs list.

[XBOX-Nav Mode not working: Dashed Line on ND, not following it.]

Hi @RosstheBoss

Please refer to this post here and ensure you have filled in the required data on the INIT B page prior to engine start: 

Thanks!

 

[adding airlibe codes to EGGP]

Hi @hairagon

We, at iniBuilds have not made any Liverpool (EGGP) scenery. The one sold on our store is made by Digital Design, so I'm afraid you're going to have to contact them directly for support via their Facebook here, or at this email address: evgenybaturin@gmail.com.

All the best.
Thanks!

[A320N V2 - FMS Freeze After Pressing Init Request]

Hi @Peter S

Yes its possible that the freeze is happening due to missing data in your OFP. 

Please ensure you are using the official profile listed here: 

 

Also ensure you are dispatching your flight with the following settings in Simbrief:

- OFP Layout and Units you can choose as you prefer

- Ensure Detailed Navlog is enabled

3 hours ago, Peter S said:

in my OFP there is no CI, i select auto in simbrief

That is fine, as when you select AUTO, after you dispatch simbrief should assign you a cost index automatically.

Thanks!

 

[ininmanager on the fritz again]

17 hours ago, Jason_S said:

It says "email and password" do no match.

Hi, if you are getting that, click on your name on the top left of iniManager to access the settings. Then 'Sign Out' from there and sign-in again. After you've logged back in,  on the same settings page you can ensure the library locations for your sim are correct, and hit 'Scan Now' to restore the status of your purchases to the iniManager.

The reason this happens is because of session time-outs or security handshakes not completing (there are a whole host of reasons for which it can happen).

1 hour ago, vinno65 said:

me too quite the pain in the arse, same thing happens when trying to use paypal in the store click purchase nothing happens, i'm sure you chaps must be losing sales because of this been happening for ages

If you're having issues purchasing via the iniManager app, then please instead make the purchase through the web store and simply use iniManager to install your purchases.

The team is aware and have been making changes to address this, as well as a general overhaul of the iniManager to avoid such issues in the future. Apologies for inconvenience caused and appreciate your patience in the meanwhile.

Thanks!

[No multi-storey car park on Cloud Gaming]

2 hours ago, Nicholas Green said:

Today it works! Not sure if you fixed it or if it is a Cloud Gaming thing, but looks good now thanks. 

Awesome. Glad to hear. Nope we did not do anything I'm afraid. Just the wonders of cloud computing haha!

[Incorrect/Missing Parking markings on G stands + incorrect GSX position for -300ER]

Thanks for the report. Noted.

[Terminal bulding hight issue]

20 hours ago, Bonoldi said:

There is a problem in that terminal that I can`t solve.

As suggested above. Check the Content Manager in your sim to confirm you have only iniBuilds KJFK installed, and delete the "default" Handcrafted Asobo KJFK. After doing so, close your sim and also clear your scenery index.

Instructions here:

 

Thanks!