[How do i get my simbrief flightplan into the FMC ?]

So yes, how ?

Flightplan loaded within the EFB, how i get em into the FMC ?

Thanks..

[Optimise a bit more at NZQN ?]

Heavy to say, i was pushback from gate 2 and on outside view ( not drone camera ) from the plane i turned my camera around and as far as the background airport buildings came in it was stuttering somehow, got that more often on other places at the airport; as bockround comes i got short stutters..

My settings are moderate, LOD90 Render 60 so defently not overpushed.

cheers 😉

[Optimise a bit more at NZQN ?]

At zooming around from outside i get some short stutters around and i do not have this at your KLAX.

And KLAX is huge in comparsion with NZQN..

Maybe you could do some optimations there ? Would be fine you guys could look at NZQN in case of this..

cheers 😉

[Bump on the runway]

Yes here too,confirm, very bad bumps - at start with a PMDG 739 a bump took me half out of the runway..

My passengers screamed loudly at this point 😅

In use V.1.01

cheers 😉

[ILS path ?]

OK ,My third ILS approach worked, but that has nothing to do with the set of the right KM/H. I had set this speed also with the other approaches but there at some point as far as i set full flaps the nose of the plane goes rapidly down and grounded me..

What i changed was the weight, and way too much heavier, the whole middle part was used ( 180000kg ? ) before i had only a truck loded, so could it be if you are loaded too lightly which affects the stability of the flight attitude in some cases ?

I will do more tests but this shows up for me - at this third flight at apporach i could set full flaps witout the nose diving issue..

cheers 😉

[ILS path ?]

8 minutes ago, Iconography said:

Hi! What’s your approach configuration? To be honest I’ve only done two ILS approaches so far, but I haven’t had stability issues yet. I’m typically at 277kph with full flaps and it’s pretty stable. It does seem to drift slightly off the localizer though in crosswind, but not enough to destabilize the approach. 

That being said there’s an FAQ that mentions the plane’s autopilot wasn’t built for low speed use and is intended to be hand flown. That may be what’s happening. 

I will look into this, not shure anymore what my speed was, your 277 means 277KM/H what is 150knots with full flaps ?

cheers 😉

[ILS path ?]

Guys, had a lot of problems to hold her correct on the ILS path, the annunciator shows i am on the path but she loses them all the times.

On the ILS way down the plane does often very big hits up and down and this results that i am mostly to deep long before the runway, could there be looked at ?

Maybe something to do with the flight model file, because the rudder and pitch inputs are reakting very, very hard..

This bird is hard to land therefore we should have a good capturing and flight on the ILS path - IMO.

cheers 😉

[Sound outside and reverse]

Could be a bit louder IMO.

cheers 😉

[2D popup panel are not updating from the outside plane view]

If i pop up the 2d panel on my second screen with the PFD,EICAS ect. and go to the outside plane view the panel does not update.

From inside the plane yes but not from outside so hope this can be fixed with the next update..

Just don`t know if this is a Asobo thing or something other, to say PMDG737NG had the same thing but this is now fixed with there last update.

Hope you inibuild guys can do that aswell with your A310 🙂

cheers 😉

[A310 not working with SimBrief after update]

17 hours ago, Decio Pedroso said:

Congratulations, IniBuild guys! PENDING issue fixed.

No PENDING anymore. However SB FLP still missing. No FLP loaded after SB request from ACARS

Same to me, pending is gone but SB Plan loading still not possible ?

cheers 😉

[pilot support screen empty]

2 hours ago, Eyz1978 said:

I tried to use Simbrief downloader and create the flightplans directory as you suggested but when I entered From/To in FMC init page it did not see the plan.  My MSFS package and community are not on the same drive than MSFS program itself, this could be the problem maybe.

However thanks again for your suggestion.

Sorry it does not work for you, i did load a plan a couple of minutes back and it worked fine.

My MSFS is under C Drive but my Community and Official is on Drive D but this means my MSFS package Folder is C Drive so could be the reason - but not shure about that..

cheers 😉

[pilot support screen empty]

47 minutes ago, Eyz1978 said:

I have the same problem here:

• I uninstalled the iniManager via the control panel, and then delete the iniManager folders in AppData\Local and AppData\Roaming
• I installed IniManager

The first time I used IniManager I was able to see my Simbrief plan in the Pilot Support tab but if I close IniManager and reopen it I have a blank window in Pilot Support tab.

I wanted to use IniManager because I'm still unable to load directly from Simbrief in the A310 FMC (even with the todays's MSFS patch).

There is still one Option i am using at the moment:

You can download the Simbrief Downloader that gives you the Option to save the last Flightplan for all Developer that set up in there, inibuild aswell.

There you can set the location where to save the plan, for example in my case:

c:\Users\yourname\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalState\packages\microsoft-aircraft-a310-300\work\flightplans\ for the store Version.

If you dont see that flightplan folder there just create that folder and save the flightplan in there, i did this and it is working now, so hope it helps you aswell..

Just to say that this desaster with not seeing the pilot page in the inimanager should be fixed and i am not shure if the plan load work over the FMC; if not this should be go under a fix aswell - long time problems now.. 🤔

cheers 😉

[pilot support screen empty]

23 minutes ago, pmplayer said:

Had the same problem so this worked for me..

cheers

Nope sorry, after i opened the manager the second time the pilot window again is total emty - did not hold long 🤔

So what is goeing on here, i am bit confused because it worked before, until this issue is coming in..??

[pilot support screen empty]

16 hours ago, Sam said:

Could you please uninstall the iniManager via the control panel, and then delete the iniManager folders in AppData\Local and AppData\Roaming, and then install the iniManager from: inibuilds.com/inimanager?

Had the same problem so this worked for me..

cheers

[Simbrief import stuck on PENDING]

1 hour ago, b3lt3r said:

Uninstalled both the base and enhanced modules. Re-installed and loaded. The load time didn't look like a compile took place so not convinced the uninstall actually deleted everything. Anyway - spawn in, power on batteries and GPU, start IRS align, go to ACARS, select simbrief import and then PENDING.

To be clear - the fact that it seems to work for many others suggests there is something in the environment of those of us with the problem that causes the issue.

To that end - a little context for my setup:

Steam install, Spad Next, Track-IR, Navigraph, FSUIPC - aside from that I don't this there is anything too weird.

One other thing - I have seen people say weather radar is functioning but when I turn it on I get what looks like a test pattern and no sweeps.

Thanks  

Or it does only not work for those people where the regular compile ( me included ) not work like it should seeing that if you have no compiled files in this directory :

c:\Users\XXXXXX\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalState\packages\microsoft-aircraft-a310-300\  - this is the path for the Store MSFS Version.

Can anybody confirm that it works ( simbrief import ) over the FMC with not have those compiled files in this directory ?

If so i am complitly wrong, so any reply report would be fine about that..

 

One other thing - I have seen people say weather radar is functioning but when I turn it on I get what looks like a test pattern and no sweeps.

Did you turn around that WX Knob ? ( and to make shure you have clouds around ) had this first too, but turning that knob to the second hold from right did the trick for me.

cheers 😉

[Simbrief not working?]

1 hour ago, pmplayer said:

Do can you explain how to do it ?

If you download the plan where to store so the FMC find it ?

What you have to do to load the plan into the FMC ?

cheers

OK found it my self !

To all who wants to try, it does work for me:

From the inibuild store download the iniManager and install.

Finish all your setting after opening the manager, simbrief with your username or ID, i use the username because it is asked within the FMC

In there go to Pilot support and there at pilot support export flightplan, should show your last created

The planfile gets DL and is stored in your Official/OneStore/microsoft-aircraft-a310-300\Data\FMS plans\

For example this is my Path:

d:\MS Flugsimulator 2020\Official\OneStore\microsoft-aircraft-a310-300\Data\FMS plans\

Go to your FMC and put the plan in there, for example:

Plan is safed as OERKOJAI.fpl so put in OERK/OJAI, that should do it..

 

Hope this helps and Happy Flying !

cheers

[Simbrief not working?]

10 hours ago, atsbob said:

No probs. I'll use the Ini manager in the mean time.

Do can you explain how to do it ?

If you download the plan where to store so the FMC find it ?

What you have to do to load the plan into the FMC ?

cheers

[Simbrief not working?]

Hi guys,

same thing happens to me, put in my simbrief username pressing Simbrief and getting this: PENDING*

The simbrief.ini is in the right location and says my username ?? 🤒

cheers