Jump to content

pmplayer

Member
  • Posts

    129
  • Joined

  • Last visited

Posts posted by pmplayer

  1. Hi all,

    At my first flight today with the A350 i set up a flightplan at Simbrief, my Simbrief ID is showing in the EFB settings so this should be OK.

    Over the EFB i could do all what is needed to load the SIMBRIEF Flightplan into, so all was seen, OFP, Sync Simbrief, and so on..

    But on my CDU ACTIVE at the init Page my CPNY F-PLN REQUEST was greyed out and so i could not load the PLN into the CDU.

    I tried serveral times with restart the flight and close the Sim and started new but i had no luck, the request always was greyed out so seems i need some help here.

    Someone else seeing this or do i forget some settings for that, so a bit confused here..

    Any help would be nice !!

    cheers ๐Ÿ™‚

  2. 2 hours ago, chinjh said:

    VHHH still a no go. Selecting STAR arrivals will jam the FMC. Odd thing only 07R, 25L are available.

    And on the last yards to the runway the LOC pointer move away to the right and the plane try to follow this pointer and steers away, you have to shut down fast the AP and do a hand fly landing, hopefully they look at this problem..

    cheers ๐Ÿ˜‰

  3. Hi folks,
    I would also like to mention my last experience of four flights (with V.1.1.1) here because I have never been able to finish four flights in a row without a crash.

    The first flight was about 3 hours, flight 2 and 3 were about 4 hours and the longest was today from PANC to RKSI with 8 hours 20 minutes.
    I had 3 flights with version V1.1.0 and all with a total crash, so I would like to mention that the update with this version seems to have had a very positive effect on my case - I can only say keep it up Inibuilds, I am very happy to finally be able to fly from A to B without completely failing.

    Only the really big bugs have been taken into account here, not the minor ones, just to clarify.

    OK to be clear, 4 flights are not yet the world but now you can hope...

    But i am a happy camper today, I thought already this would never be happen like this for me !!

    cheers ๐Ÿ˜‰

    ย 

    ย 

    ย 

  4. Hi guys,

    Today i started a flight from KLAX to PUNK, dapart from RW24L and about half way along i got thrown up in the air, cause was a big bump.

    Would be fine you could look into this and if so a fix would be nice, if you landing there this probably kills the plane and the people in that plane aswell !

    cheers ๐Ÿ˜‰

  5. 52 minutes ago, MarcusVT said:

    Yesterday I had a throttle problem. Autothrottle was working, but when I deactivated for landing, it went to iddle. No throttle input was being sent to the game. I could GA using AP. Then recalibrated throttle, cycled A/T several times and sudenly all came back to life.
    BTW I was always arriving too high for landing and now I turn of A/T to control approach speed. Also set altitude constraint to AT and not AT or ABOVE, for final fixes so that I can arrive at proper altitude. I'm enjoying the plane but, if it is not a real plane characteristic, the VNAV should be improved.

    As far as i know they still ongoeing to work on VNAV issues..

    cheers ๐Ÿ˜‰

    • iniBuilds 1
  6. Same to me, not always but more or less half of all the loadings i get this issue..

    Would be time now ( after that much updates ) we get this plane competly stable so it is flyable for all of us costumers ! ๐Ÿค”

    cheers ๐Ÿ˜‰

  7. OHHHHH - please not, i did three flights with the last build ( 1.1.0 ) and i got the same thing ( fuel was almost emty, the plane did a circle and systems not working anymore ( AP and more ) and so i stop again flying..

    Now i did a first flight and a same one i did before with the problem and it works very fine, no problems at all at this flight but it was only one flight and i will try more, but this sounds bad again..

    cheers ๐Ÿ˜‰

  8. 4 hours ago, funkyj4ever2 said:

    So i did another flight no problems. So maybe there is something wrong with the trushmaster airbus throttle and the a300 when you have those starter and fuel switches mapped. I dont have any issius with other aircraft. I dont have any double assigned mixture or anything.ย 

    Noting mapped like this on my HC Bravo.

    Checked all my settings, so should be OK !

    cheers ๐Ÿ˜‰

  9. On 3/30/2024 at 4:17 PM, pmplayer said:

    Today I thought I would try a flight again, after a long break with this airplane.

    Flight was from WSSS to VHHH and when my altitude (35000ft) was reached I went out to get a coffee.
    When I came in 10min. later the airplane has cased the NAV path and turned a circle.

    I then brought it back into the NAV direction and up to altitude by hand and wanted to switch the autopilot back on, but for God's sake I couldn't do it, I tried for 10 minutes but couldn't do anything, no chance.

    But then it only worked after I loaded the panel status "Ready to Fly" in the EFB and of course had to load the flight plan and all the settings into the FCU again.
    But really guys, it can't be that, there's still a nasty bug in it and what's more, the sim crashed the first time I loaded the A300 for the flight into the sim - hell, what's going on with this A300, I'm just ruining my nerves !!!!!

    cheers

    Yesterday i did this flight with V 1.1.0 again and it was beautiful this time until only one thing..

    It didn't do that cirkle like it did before so it was a very good flight to me until short before landing.

    Some Yard before landing ( VHHH RW07R ) the magenta LOC pointer moved very fast away to the right side and the plane reach to follow that pointer.

    As i had the same with that last flightย I expected this and was prepared for it and turned off the AP and landed the plane manually.

    But now the question, is thisย Airport relaeted or has it to do with the A300 logic ?

    I think i did landings with other planes on this runway and it did work fine ( for example the Asobo/WT 787-10 )

    cheers ๐Ÿ˜‰

  10. 54 minutes ago, mcnobody said:

    All covered here:

    ย 

    I know that but can`t find the button or switch for set a larger distance from the TCAS, like from 6 to 12 or to 24nm..

    cheers

  11. Today I thought I would try a flight again, after a long break with this airplane.

    Flight was from WSSS to VHHH and when my altitude (35000ft) was reached I went out to get a coffee.
    When I came in 10min. later the airplane has cased the NAV path and turned a circle.

    I then brought it back into the NAV direction and up to altitude by hand and wanted to switch the autopilot back on, but for God's sake I couldn't do it, I tried for 10 minutes but couldn't do anything, no chance.

    But then it only worked after I loaded the panel status "Ready to Fly" in the EFB and of course had to load the flight plan and all the settings into the FCU again.
    But really guys, it can't be that, there's still a nasty bug in it and what's more, the sim crashed the first time I loaded the A300 for the flight into the sim - hell, what's going on with this A300, I'm just ruining my nerves !!!!!

    cheers

×
×
  • Create New...