pmplayer

No, I don't because I want to live. But I am confident that the problem could be solved now..😎 cheers 😉

I finished my first flight from EDDS to UWKD, flighttime was 3h 40m and from Start to the End of this flight everything worked like a dream - just beautiful !! No problems with holding the runway more or less straight on departure, fine NAV flight, top ILS capture, no falling out of the sky - what should i say could not be much better. Great update from inibuilds, love the sound now, had a real lot of fun with this flight. 👍 To say for the "falling out of the sky problem" i had before i have to do some more flights to make sure this thing is eliminated with this build, so if i have done some more flights i will reply back here, but so far so good ! cheers 😉

That`s now something i can not understand, why should it work for me an not for others ? After shut down the engines did you wait about 30 seconds before you start the engines over the panelstate and do you see in the upper right of the EFB the full counter are fulling ? cheers 😉

Same to me ! cheers 😉

I am at the moment at my first flight with V.1.0.2 and my post with the workaround still works for me - did the fuel load a couple of minutes on the runway with no problems at all, worked very well just to report ! How do you guys shut down the engines ? I do it with the ENG1 and ENG2 shut down on the pedalstal and like this it works OK for me. And after ca. 30sek i start "Ready for Takeoff" panelstate on the EFB, the fuel counts up to my settings and i am ready to go.. cheers 😉

Holy, so it looks like this "falling out of the sky" thing still exists after V.1.0.2 - if so, to bad..🤪 cheers 🤔

Is this with V.1.0.2 ? cheers 😉

Have to DL the new Version first and will try and reply back but this can take sometime because i am not home at the moment.. cheers 😉

Are u using V.1.0.2 ? This was done with V.1.0.1 and worked for me but i didn't tried with the NEW Version yet.. cheers 😉

It does work for me the last time i did.. Did it like this ( workaround ) So if you on the runway trie it this way: First shot down the engines than go to the EFB load your Simbrief flightplan and load the fuel to the plane. You should now see the upper fuel counter goeing slowly up to your pln fuel. Now go and load the panel state "ready for takeoff" the engines slowly goes to work and the full is still count to the your desired fuel. If you load your flightplan into the FMC before this action you have do that again so the better way is first load your fuel than start the panel state and than set up your CDU, worked for me, so hope this helps.. cheers 😉

Forgot - and this: And i use for example GSX Pro and Bijanstudio four-season-pack over MSFS. cheers 😉

I do understand.. I always only link the plane i fly from the Addon Manager to MSFS only the MSFS planes are all there and i use no Add ons like FSUIPC or those that are similar to this Add. And shure i use a lot Airports, all payware with MSFS and some are linked with Addon Manager . Mostly around 30 airports plus-minus are always linked to MSFS. Hope this helps or can help.. cheers 😉

OK, all those settings are deakivated ( and was ) only icing is on visuell.. cheers 😉

Hi, Thanks a lot, PC is of at the moment but i will look at this... But i assume those settings are all of for me normal, but maybe something changed somehow ( MSFS update or so ) but as i said will look at and reply back.. cheers 😉

To say i had around 6 flights now with this plane and two of them was falling out of the sky, thats almost 50% and that realy kills the fun to fly any hours more with that bird.. cheers

Which ones, now you want me to tell you the hundred Add ons i use ? That would be a hard job, most are payware Airports and payware Aircraft and linked with Addon manager to MSFS. Mostly only the plane i fly is linked to MSFS but to sort something out i have to say the A300-600 is the only plane who falls out of the sky and no other do that. I have no CTD and nothing like this for a year or more and i am pretty shure it has deffently to do with the A300-600.. But i realy don't know why.. cheers

So it seems it does not have to do with using Fsuipc either or not, so ..??

And another flight today with "falling out of the sky", after a 2 hours flight from 4 hours so frustrating and a totally unusable airplane at this stage with this issue.. Please look what happens, otherwise it is a very good airplane but with such a problem it`s not useable ! cheers 🤒

Shure, i have... cheers 😉

@ Heya! We are tracking this issue already and probably have a fix for it in the next version, if it is the same one. The you use FSUIPC by chance? No, i am not using FSUIPC at all, so this could not be the only reason why this "falling down the sky" happens - unfortunately.. cheers 😉

Did a second flight ( same as above ) and this went well, all was beautiful, ILS capture ect., ect.. The difference between the two flights was that the 2nd flight started on the runway. In the first one the cargo was loaded with GSX and when the pushback with GSX was finished I loaded the saved flight "Ready for Takeoff" to completely start the aircraft. But I don't know if that could be the problem. Just to reply back..

Same to me with my second flight ( should go 2,5 hours ) my first was a Passenger flight this went well, my second a Frighter flight and i stepped away about 5 mins and as i came back the plane allready falls into the water and i could not do anything to keep on flying.. Also i see short stutters on the ground (also in the air but far less) for example when simply driving to the gates ( every some seconds ) and when loading the GSX vehicles jerk, but this is the plane's fault because this doesn't happen with the other planes. Seems to me the code needs some optimization.. cheers

Thank you, missed that..🤒 cheers 😉

So yes, how ? Flightplan loaded within the EFB, how i get em into the FMC ? Thanks..

OK ,My third ILS approach worked, but that has nothing to do with the set of the right KM/H. I had set this speed also with the other approaches but there at some point as far as i set full flaps the nose of the plane goes rapidly down and grounded me.. What i changed was the weight, and way too much heavier, the whole middle part was used ( 180000kg ? ) before i had only a truck loded, so could it be if you are loaded too lightly which affects the stability of the flight attitude in some cases ? I will do more tests but this shows up for me - at this third flight at apporach i could set full flaps witout the nose diving issue.. cheers 😉