Sam

13/11/2022 - 1400z Honeycomb Bravo Users should use the following configuration, following the steps above: Paths: MS Store version: C:\Users\yournamehere\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalState\packages\microsoft-aircraft-a310-300\work Steam: C:\Users\yournamehere\AppData\Roaming\Microsoft Flight Simulator\Packages\microsoft-aircraft-a310-300\work Configuration: [throttle_common] reverse_on_axis = false [throttle_axis_1] reverse_full = -1.000000 idle = -1.000000 toga = 1.000000 [throttle_axis_2] reverse_full = -1.000000 idle = -1.000000 toga = 1.000000

Hello, Please reach out to us directly so we can assist further. inibuilds.com/contact

Hello, Could you please disable any anti-virus/VPN software you may have enabled before installing?

Thanks for the feedback @GhostlyDaemon. We're looking into this issue further and will update once we've been able to rectify the issue.

Hello, No, you may not reupload or edit any liveries available from the iniBuilds Forum, or the iniManager. Please see: https://www.inibuilds.com/legal

Hello, Could you please provide the directory you’ve set as your MSFS Community folder?

Hi Bob, Sorry to hear that you're having issues loading into the A310. Unfortunately, we aren't able to assist with CTDs that occur during the loading of the aircraft itself, as this is an issue with the simulation initialisation the package. We are only able to assist with CTDs that occur after loading into the aircraft. Kindly report your issue to the MSFS Zendesk support for further assistance: https://flightsimulator.zendesk.com/hc/en-us/requests/new

Hello all, If you are still not seeing the A310 for MSFS after setting your community directory in the settings menu, then please do the following: Please uninstall the iniManager via the control panel, and delete the iniManager folders in AppData\Local and AppData\Roaming. Then install the iniManager from: inibuilds.com/inimanager.

Hello, Thanks for the suggestion! This is on our list for a future update.

Hello Matt, Apologies for the error. Could you please uninstall the iniManager via the control panel, and delete the iniManager folders in \AppData\Local and\ AppData\Roaming? After this, could install the iniManager from: inibuilds.com/inimanager.

Hi Barry, Thanks for the reports, and apologies for the inconvenience. We're looking into what could be causing the continuously loading on the checkout screen. In the meantime, you can still purchase products directly on the iniBuilds Store. As for the email and password error, please reset your password here: store.inibuilds.com/account We'll be adding support for libraries in a future update, however, in the meantime, you can customise the directory of your MSFS install location in the settings menu, and them create a symlink back to the community folder.

Many thanks for the report, and apologies for the inconvenience. We haven't been able to replicate this issue on our end just yet, but we're looking into what could be causing it. In the meantime, all products can still be purchased directly from the iniBuilds Store, and then will show up in the iniManager.

Today, we're excited to release a major update to the iniManager: Version 2.What's new?This version features a complete redesign of the app, offering a much improved, intuitive way to manage your products from the iniBuilds Store, and interact with your simulators in new ways.New features include: A new way to discover sceneries, called "World view", which allows you to see all of the airports available from the iniBuilds Store on a visual map. In-app purchasing: Purchase and install your products in one place, removing the need to visit the iniBuilds Store in your web browser. You can now purchase all products directly through the iniManager. MSFS liveries installation: You no longer need to visit the iniBuilds Forum to download liveries, the iniManager v2 now features MSFS livery installation directly into the Community folder. Pilot support page: A lightweight tool that puts all of the necessary information needed for your flight at your fingertips, using native SimBrief integration. You can view your OFP, METARs, Flight maps, and ATIS information directly in the iniManager. X-Plane 12 & Prepar3D compatibility: X-Plane 12 is now natively supported, along with Prepar3D (P3D products coming soon). Numerous bugs fixes/improvements DownloadThe iniManager v2 can be downloaded here: inibuilds.com/inimanager

Hello, Thanks for your patience. v2.20 has been published to the iniManager.

v1.04 of iniScene Los Angeles (KLAX) for MSFS has been released. This update resolves a few minor bugs. This update can be downloaded via the iniManager. v1.04 - Added obs lights to tower - Adjusted lodding on all terminals. - Slight adjustment to 69A - moved parking position and shortened JW. - Missing jetway 155 - Terrain issues near 151 - Fixed missing geo and z-fighting on T5 - Fixed various GSE collisions - Fixed floating HVAC - Fixed flickering parallax on TBIT entrance

Hi, please reach out to us directly so we can look into this further.

v1.02 of iniScene Los Angeles (KLAX) for MSFS has been released. This update resolves a few minor bugs. This update can be downloaded via the iniManager. v1.02 - Fixed gate 25B alignment - Fixed gate 221 alignment and post height - Additional static jetway Gates 150, 152, 154, 156 - Gate 67 replaced with short jetway - Fixed smooth bump and sign near C/C6 - Guard lights to all hold shorts

v1.01 of iniScene Los Angeles (KLAX) for MSFS has been released. This update resolves a few minor bugs, including elevation issues on runways. This update can be downloaded via the iniManager. v1.01 - Missing jetway at Gate 80 - Jetway connection alignment at Gate 159 - LOD1/2 Geometry issues on TBIT Main terminal - Removed existing runway profiles (terraforming) and replaced with a simple slope. This is to try and resolve PG tearing.

We're excited to announce our partner, Xometry's, next scenery for X-Plane and Microsoft Flight Simulator: Oklahoma City (KOKC). Located in the Central US, Oklahoma City features a number of flights throughout the continental US, with Southwest being the largest operator at the airport, taking account of 48% of all flights. Oklahoma City will bring the same high-quality standards as found on all Xometry products, using the latest set of features available. It will be compatible with X-Plane 11 & 12, and later for Microsoft Flight Simulator. We are excited to show you more of this airport in the coming weeks!

Hi Mark, Thanks for letting us know. We'll note this for a future update. As for the transferring of orders, you can do this here: inib.uk/order-transfer

Hello Loren, Sorry to hear you're having issues. Please reach to us directly so we can provide you with a beta copy that should resolve this issue.

Introducing our next mega-hub for Microsoft Flight Simulator: Los Angeles (KLAX). Based on an early-mid 2022 state, Los Angeles showcases our latest skillsets, including a detailed yet optimised, custom interior model for the Tom Bradley International Terminal, airline-specific ground service equipment placed accurately at each gate/terminal and much more. The airport, commonly referred to as "LAX", is the primary international airport serving Los Angeles and the surrounding metropolitan area. It is the world's third busiest airport and the United States' second busiest airport with a whopping 88 million passengers handled in 2019! Los Angeles is a major international gateway to the US and also serves as a connection point for passengers travelling internationally. This is the perfect hub for your US operations and long-haul flying. Key Features Hand-made ground textures with crisp, bespoke texture sets (Runways, aprons, paths, roads) True-to-life airport land side recreation with custom ground decals, signposts, vegetation, parking barriers and more Detailed yet optimised, custom interior model for the Tom Bradley International Terminal with parallax effect at other terminals Custom built jetways with realistic variations using PBR texturing and animations, including gate number toppers Hand-placed, airline-specific, bespoke ground service equipment placed accurately at each gate/terminal featuring hundreds of containers and dollies Learn more and buy now: inib.uk/iniscene-klax-msfs

v1.07 of iniScene San Antonio (KSAT) for MSFS has been released. This update includes numerous bug fixes and performance improvements. This update can be downloaded via the iniManager. v1.07 - First phase of two to model the entire surrounding structures and complexes around the airport, to relieve the load of photogrammetry in the vicinity - LOD optimizations to many heavy models, added missing LOD's for Tower - Removed harmful .FLAG files on projected mesh objects that were inducing stutters - Modelled several FBO interiors, utilizing seamless tiled, low resolution existing textures. Millionair, and the new Triple Cutter Complex - Smoothed terraforming, converted to height maps to minimize terraform polygons - Reduced several oversized textures - Adjusted several light sources for more natural light spills - Added missing lightpoles at employee apron parking lot - Optimized DrawCalls on ALL objects and dynamic elements (jetways/Pushbacks) - Added PBR to several overlooked objects, including static Citation jets and Grumman 159

Hello, This isn't currently a feature that is offered, however, we'll definitely note it for a future update.

Hi Matt, Sorry to hear you experienced issue with your flight. Unfortunately, without your Log.txt aren't able to look into this issue further. If you still have this, please send it here and we can take a look.