Sam

Hello, Our exclude files are only intended to remove default buildings. If other issues occur, this would be up to the developer themselves to update. However, we will look into this and see if there is anything we can do.

Hello, Apologies for the delay. We will get this reuploaded to the freeware library.

Hello @Natman. Unfortunately we do not have plans to paint iFly aircraft at this time. Apologies for the inconvenience.

As this query has been addressed, we will now be locking this thread.

As this issue has been solved, we will now be locking this topic. @timburnier If you need additional assistance, please contact our team using the "Contact" bubble in the bottom left corner of the screen.

Hello, This issue has now been fixed. Apologies for downtime.

Hello all, This issue has now been fixed. Apologies for downtime.

Hello @sportpilot67. Our Prepar3D v5 Compatibility Files are designed to remove default buildings. Unfortunately if you have duplicate runway numbers, this isn't something we'd be able to fix. Apologies.

Hello Ricky. As the scenery already has SODE jetways by default, we do not have plans to create this profile.

Hello Luca. Apologies for the delay. This livery is compatible with v5.

Hello. Apologies for the delay. The download should work now.

Boundless Simulations has released v1.10 of Shannon (EINN). This update includes major visual improvements and bug fixes. A full changelog is available below. This update can be downloaded from your iniBuilds Store account: store.inibuilds.com/account v1.10 - Improved performance - Upgraded airport vehicles - Improved ortho blend with default scenery - 'flat' aircraft edited out of Ortho near ALC hangar - Reduced file size - Improved ground markings - More ramp starts near hangars / remote apron

Boundless Simulations has released v1.10 of Kerry (EIKY). This update includes major visual improvements and bug fixes. A full changelog is available below. This update can be downloaded from your iniBuilds Store account: store.inibuilds.com/account v1.10 - Upgraded to 4K, PBR Ground textures - Added custom ground road traffic - Added animated airport vehicles - Overhauled night lighting - Improved ground markings - Replaced thousands of trees with new HD versions - Improved autogen houses/buildings

Boundless Simulations have released v1.10 of London Stansted (EGSS). This update includes major performance improvements and bug fixes. A full changelog is available below. This update can be downloaded from your iniBuilds Store account: store.inibuilds.com/account v1.10 - Improved ground vehicles - Added Airport ranger trucks - Reported bug fixes - Overhauled night lighting - Major performance upgrade

v1.02 of the iniSimulations BelugaST has been released. This update includes small bug fixes and improvements. A full changelog is available below. This update can be downloaded from your iniBuilds Store account: store.inibuilds.com/account NOTE: This update requires a reinstall. Remove iniSimulations A300 BelugaST v1.01 from your X-Plane 11 installation’s aircraft folder: \X-Plane 11\Aircraft before installing this update. v1.02 - Wheel chock bug fixed - Jammed cargo door in certain scenarios fixed - Wing-flex adjustment on right wing - Master caution animation bug fixed

v2.00 of iniScene Shoreham (EGKA) for MSFS has been released. This update includes major quality improvements and additions. A full changelog is available below. This update is available free of charge to all existing customers and can be downloaded from your iniBuilds Store account: store.inibuilds.com/account You can learn more about and purchase iniScene Shoreham here: inib.uk/egka-msfs v2.00 Changes - Re-modelled main terminal. - All airport ground lines re-created as a projected mesh. - New Old Shoreham Toll bridge model. - Added airport perimeter fence. - New landside road and parking area textures. - Buildings behind runway 20 re-modelled. - New fuel pump models. - "Green monolith" re-modelled. - New dirt/weathered textures added to some buildings Bug fixes - Fixed landside airport flags. - Overall vegetation adjustments. - Overall mesh adjustments in all areas of the scenery. - Added correct taxiway signage. - Many low-resolution buildings brought to 4K texturing standard. - Ground dip fixed behind heli hangar. - Updated main terminal colouring. - Added runway/taxiway lighting. - Walkway/mound at the riverbank of the airport added - Two buildings/hangars at runways 20 replaced. - Night lighting added - Apron lighting added - Many AO bake fixes on buildings throughout.

Hello @tondrasek. At this time, we don't create GSX profiles for aircraft. Apologies for the inconvenience.

Hi Patrick. We can definitely accommodate this livery! Please reach out to our team so we can discuss this further: inibuilds.com/contact

v1.01 of the iniSimulations BelugaST has been released. This update includes small fixes and improvements. A full changelog is available below. Hawarden (EGNR) has also been updated to offer a slightly decreased visual quality version for those suffering from bad performance: inib.uk/egnr This update can be downloaded from your iniBuilds Store account: store.inibuilds.com/account NOTE: This update requires a reinstall. Remove iniSimulations A300 BelugaST v1.00 from your X-Plane 11 installation’s aircraft folder: \X-Plane 11\Aircraft before installing this update. v1.01 - Phantom overhead CTR tank figures bug fixed - .005 frequencies in IDC/Radio control panel bug fixed - Takeoff performance commuting bug fixed - Alignment of Korry switch fixed - Rudder pedals bug fixed - Spamming request loader button fixed - Omission of LBS completely - Compt needle bug fixed - Updates to Route Network Documentation

v1.00 of the iniSimulations BelugaST has been released. You can purchase it here: inib.uk/beluga v1.00 - Initial release

🐳 Follow the steps below to claim your 25% discount off the BelugaST if you are an A300 owner. Step 1: Ensure you are signed into the iniBuilds Store Account used to purchase the A300 BEFORE adding the Beluga to your cart/purchasing. Step 2: Add the Beluga to your cart/buy now: inib.uk/beluga Please note: The express checkout options on the Beluga store page (ex. PayPal, Apple Pay) will not apply the discount. You must add the Beluga to your cart or use the "BUY IT NOW" button at the top of the page. Questions? Our team would be more than happy to help: inibuilds.com/contact

Hello @Patrick C.. This dynamic lighting profile was made for a privately distributed scenery, although it was published publicly for those who behold the scenery. Unfortunately, in respect to the individual who holds the rights to the scenery, I cannot provide any further information. Thanks for your understanding.

Hello Grant. Welcome to the forum. This is a limitation of GSX. In Prepar3D v5, all jetway logos both custom and default are disabled, it is not a result of the profile. Apologies for the inconvenience.

Origami Studios has released v1.1 of London Gatwick (EGKK) for X-Plane 11. A changelog is available below. This update can be downloaded via your iniBuilds Store account: store.inibuilds.com/account v1.1 - Added optional non-PBR objects to installation - Added exclusion zone in front of Boeing Hanger to try and eliminate trees - Added holding point J4 - Adjusted UV mapping on Gatwick Shuttle tracks - Fixed gaps in glass on Pier 2 Modules - Added LODS to buildings - Culled a significant amount of lights at the south terminal carpark - Reduced param size on the car park lights - Retract brickwork under Pier 2 - Added window frames to Pier 4 for a bit more depth - Resolved draw order with the glass on the Airbridge - Removed doubling up of cars near Maintenance Area 1 - Adjusted position of curved wall - Added Jetway to Stand 25 - Made glass jetways blend transparent items slightly better - Made jetways more reliant with Zibo - Tweaked SAM parameters for 12 - Tweaked SAM parameters for 104 - Tweaked SAM parameters for 105 - Tweaked SAM parameters for 552 - Tweaked SAM parameters for 553 - Tweaked SAM parameters for 564 - Fixed holes in roofs on Pier 6 - Added LODs to some Jetway items

Hi @D4rkness. Thanks for your patience. We've updated this profile, you can download it here: inibuilds.com/reflection-profiles