Other

Can I isolate the EFB Tablet from the aircraft? I like to enter FMC data manually. Patricio Valdes

Title says it all. We are now on version 1.4.0 of the a340 and still the MCDU when using the WINWING gear with SAP freezes routinely. Not a showstopper as a reset of the MCDU (power cycle) restores functionality but it most certainly breaks any sense of immersion and real life flight, which, after all, is the goal of using hardware gear with the aircraft…Immersion and real life flight. If this was a problem for other aircraft using WINWING and SAP, I would have a bit more patience but Fenix and PMDG manage to broadcast data to MCDU’s flawlessly and have done so for many many months now, beta’s and all, so I feel it’s time for iniBuilds to pony up some answers concerning …

Good morning. What is the proper way to fully uninstall the Marketplace version of the A340 so I can install it from the iniManager without any issues? From what I'm reading online, it appears that simply deleting it from the library in the Marketplace isn't enough to get rid of all of the files. Thanks.

Hi There, I sent an order transfer request on the 16th of Jan, I have not recieved a notification that it was rejected nor any info at all from anyone at iniBuilds... The aircraft is not available for me to download in the iniManager. The automatic reply said it would take maximum 72 hours before approval/rejection.

I have the bravo throttle with 2 axis (1&2 to physical 1 and 3&4 to physical 2) which are recognized in the sim as well and they work perfectly fine with the 380. My problems already started with the initial calibration. I did the above mentioned in the in-sim controls, chose 2 axis and reverser on axis "no" and tried to calibrate and it wouldnt recognize axis 3 & 4 in the efb. Yet the actual levers that move in the aircraft are 1 & 4. 2 &3 remained idle. Trying to change multiple times between axis counts or resetting calibration didnt work (thought it might have stuck their) so i decided to simply disconnect my actual hardware and look: it wor…

I have the same problem with my Thrustmaster TCA.

Hi, since I have not come across this from my searches... is there a specific Simbrief profile available for the A340 VIP variant? Or is this a question that need to be addressed with the navigraph folks? Thanks so much!

When I perform the loading process using GSX synchronization from the EFB, it first loads passengers, then the catering, and finally the fuel truck. Instead of loading fuel, then catering, and finally passenger boarding, I have the official GSX profile.

Hi All, I've done four flights in the A340 now and on each occasion the take off calculator has given me the error "UNABLE TO FIND SAFE PERFORMANCE DATA". All takeoffs have been from major airports, EGLL, KCLT, KLAX and EDDM at moderate weights. In this instance, I'm AT KLCT trying to get it to give me take off performance for a flight to EDDM. Using the SimBrief take off calculator works fine - But the EFB one doesn't seem to work. Does anybody have it working or any suggestions?

I've just bought and installed the Aircraft, I set it up in the EFB and then did a sim restart. I was flying the VIP version (QTR) from OTHH to OMAA and just as I'd got to cruise I was inputting the arrival and I had the crash. -OTHH/34R F210 KUPRO2E KUPRO N300 KAXOB Q415 UKILI UKILI4C OMAA/31L -DIST 236-

Hello, I'm experiencing a WASM crash whenever I try to enter a new waypoint. I can reproduce it every time, on all A340 variants. I've uninstalled it, deleted the streaming and WASM folders, but the problem persists. I bought it a week ago, and I've always had this issue. Information Aircraft: A340 EIS1 Passenger (all versions) Simulator: FS2024 Navdata Method: NAVIGRAPH OFP: Not required, happens on any route Specs: I9 12900KF, RTX 4080, 96gb RAM DDR5 Autosave: No autosave, I'm at the door and I just installed it WASM: Error during FMGS_gauge_update execution. Error code : 0xc000001d

WASM crash during cruise was not at pc, came back to aircraft in the ocean and red screens Aircraft: A340 EIS 1 passenger MSFS 2024 Navigraph 5600x, 7700xt, 16gb ram autosave off

Hi everyone, I apologize for the formatting issues in my previous post. I am writing from a device that caused some display errors. I have now fixed the layout for better readability. Problem: I am using the A340-300 on Xbox Series X with the Thrustmaster TCA Airbus Edition (2-lever Quadrant). My main issue is that Engines 1 and 4 do not respond to any throttle input between Idle and Flex. They remain at idle power and only "wake up" and jump to full power once I hit the TOGA detent on my physical hardware. My Setup: Platform: Xbox Series X Aircraft: iniBuilds A340-300 Hardware: Thrustmaster TCA Sidestick & Quadrant Mapping: Eng…

Hallo zusammen, Ich habe ein großes Problem mit dem A340-300 auf der Xbox , wenn ich den Thrustmaster TCA Airbus Edition (2-Hebel-Quadrant) verwende. Das Problem: Zwei der Motoren (Motoren 1 und 4) reagieren überhaupt nicht auf Gaspedalbewegungen im Leerlauf bis hin zur Flex-Position. Sie laufen im Leerlauf, während die anderen beiden Motoren normal laufen. Sie reagieren erst, wenn ich den Hebel in die TOGA -Position drücke. Das passiert, obwohl ich in den MSFS-Steuerungseinstellungen die Triebwerke 1 und 2 auf meinen ersten Hebel und die Triebwerke 3 und 4 auf meinen zweiten Hebel gelegt habe. Mein Setup: Plattform : Xbox Series [X/S] …

Hello, Tiller is linked to rudder axis, I see the nose wheel turning but plane is going forward or very slightly turn with some tyre's mark on the ground (brake configuration is ok one axis on each pedal). Even applying very little power she starts to turn and immediatly slide, and if I put full rudder right, she turns left! Any idea?

Has anyone been able to successfully calibrate the Ursa Minor Metal throttle for the A340? This is what I have done: a) Started SimAppPro and calibrated within the app - both throttles test OK to full travel b) Started MSFS and loaded the A340 c) Testing the throttles within SimAppPro shows the RY axis (engines 3&4) not going to full travel on the test page d) Created a 4-Engine profile e) Engines 3 & 4 are not in sync with 2 &3 which appear to be working normally f) I have tried the "In-Sim" calibration on the EFB (some say not to do this and it should only be done within the app) but this does not change anything I hav…

Hi, On October 30 I complained about wrongly set quick views, got a reply that it has been logged but I've just checked the latest A340 update and nothing was done about that. Please take an inspiration from your A350 (and other developers) how quick views should be set (quick views = default keyboard ctrl + left/right arrow or a joystick hat switch left/right). Simple 90 degrees head turn left and right from the captain seat is absolutely perfect. I don't need to look at the wingtips during taxi turns. Thank you.

Hi, Tried to update but cannot install locally: What happenend? I also see the latest version showing as 1.06, is this right? Thanks

As mentioned in a closed topic, there still is an issue with the wipers not wiping away raindrops. I know it has been stated, that this would be an issue on ASOBOS side, however I would be interested, wether there has been any new developments in that regard. Flying the 340 in winterly conditions without functioning wiper action does make it unnecessary hard. Kind regards.

All of a sudden both Winwing fcu and efis and mcdu do not work in inbuilds A340, but in all other planes it works ( A350 - fenix A320 - FBW A380 ) however mcdu does not work in A350 and A380. I have tried everything - uninstalling all planes and simapp pro and completely new installation of msfs 2024 ver. 4 There are no lights at all in fcu and efis and no buttons work. PLEASE HELP ME .......

1.0.5 No white strobes anyone? Only red beacon is visible. Strobes are not with AUTO or ON position of the switch.

Am I correct in understanding that whilst iniBuilds intergrated GSX into the EFB, they didn't actually include a GSX profile that includes relevent load points? I.e. the catering points for doors?

During Take-off and Landing, the aircraft will literally bounce up and down the runway. It's almost like the wheels are stuck and the aircraft just bounces into the air to solve the problem .

Hi, found a bug in the a340, when pausing sim for a prolonged time (i'd say it is between 30min and 1h) the system just say sim paused even if the sim is unpaused and i wasn't able to get it back running without restarting the flight. Thanks for this beatiful aircraft!