Support

Hi, Because the airstairs are only avaliable for Ga Large stands, it makes it impossible to use airstairs at this airport which really messes with the immersion. Is there any plans to fix this in the future or any ways to get around this without purchasing GSX or any other programs. Shame becaues its brilliant scenery but havent been able to enjoy it.

Team, As per the title, Stand 21R has the incorrect taxiway turnoff number. Both the head of stand markings and signage are correct, showing 21R, but the turn off marking from TWY A, before A5, shows 22R

Hi I have an issue where on takeoff or landing on Runway 25 at inibuilds EGGW, I get a stutter that lasts about half a second to a second when nearing the end of the touchdown zone. I am trying to narrow down what is causing this issue. I think a few people might have this issue as when I am on VATSIM I notice that sometimes aircraft pause in the same location. Not all of them, just a handful. I thought that it might have been inibuilds EGSS spawning in/out so I tried disabling it, but still had the problem. I tried disabling Orbx London City Pack and that did not cure the problem. I tried with various settings in the configuration tool for EGGW, no fix. Photogrammetry…

I purchased EGGW a few hours ago, and after using the ini manager to install the airport, the sim crashed three times on the initial load. I uninstalled it via the manager, and the sim loaded as usual. I made sure to install the correct version for MSFS 2020.

Dear Inibuilds team, thanks for this great scenery, the attention to detail is immaculate! However i am experiencing some issues with elevation. (see pictures below) I have the world update for UK installed and no other versions of Luton on my system. Photogrammetry and all streaming seattings are set to on. Any idee why this might happen? Thanks a lot!

I have recently bought Luton for MSFS on Xbox and love the scenery, however upon trying to load it with the A320Nv2 I either have fully blackened avionics or suffer a crash. I first tried this with the included easy jet livery and then with the others but they all produced the same result. I have attempted all the generic memory saving tips typically used for the Xbox platform but it still doesn’t work. It does however work with the PMDG 737-800/600 as well as the ATR 42-72, A300-600(all variants) and A310 (although all the aircraft do suffer with some stutters around the build up hanger area surrounding Ramp 1 to 9). Therefore I’m just wondering if there is any way in wh…

Hello, I've noticed after a recent update (not sure if it was Luton or the SU15) that the stand number signs on the south stands (20-23) are very blurred & the numbers aren't visible until fairly close to them. Also the stand number signs are missing from stands 1-4, 77-79 & 90-93. If possible please could the max wing span sign be added at E2 and the runway guard lights (the yellow flashing ones) too. Thanks for the great scenery!

Hello iniBuilds, Thanks for the fixes of EGGW so far. Just landed at gate 61 and noticed the ground services are back. However, the ATC menu is missing the 'Ramp connection' option which brings stairs to the aircraft. This is caused by the fact you defined the parkings with type GATE_Small. Whewn doing so MSFS expects a jetway and removes the stairs option. Can you please change the parking types to RAMP_GA_Large? This will bring back the stairs!

Hi I purchased EGGW from msfs marketplace and I am shocked with this from inibuilds… I will post the screenshots but you will see for yourself the terminal is missing. There’s a whole in the ground where I’m assuming the terminal should be, it’s honestly terrible. Will there be a fix or update for Xbox console users?

Bought the scenery from marketplace in game. and as in screen shot i have this issue. i have NO other previous scenery installed. Luton is my only addon in UK. I have Bing data on and no rolling cache. ive uninstalled and reinstalled the scenery and that did not fix it, i also deleted content.xml and cleared the scenery indices and restarted sim to no avail. im all out of ideas. the airport is basically unusable.

After my first landing with the A32neo into Luton ATC guided me to gate 61. When parked I noticed no ground services are available (stairs/baggage/catering). On the world map I found that the type of the parking spot is 'ramp_ga medium'. I think changing it to ramp_ga large solves the issue. Further I would recommend to make every spot where airlines park make it type ramp_ga large. If you levae it as is you will see GA also on i.e. easyJet parking spots.

Hello dear iniBuilds-developers! Thanks for making EGGW - a really fine piece of software... Even the difficult hill structures in the west are made very well: Congratulations! May I kindly ask you to fix the following? 1. Both LOCALIZER antennas are missing as 3D models - please insert them. 2. Both Approach Light Systems are showing white side row lights - they should be lit in red instead as they are CALVERT HIGH aka HIALS-II. See the attached graphic please. Thanks a lot for your time - kind regards! Bert

Hi, Great airport scenery (used to be my home airport). I don't know why this happens but there is a large "fold" stretching on TWY B from gate 5 all along abeam gate 9. This makes taxiing in or out from gates 5-9 virtually impossible. Since there is a size limit on the pictures I can attcah, I cna't show you the whole problem. Any ideas ??

A more minor issue, but when it rains you also see the rain inside the easyJet hangar...

The airport looks great, with a lot of detail! Adding some moving road traffic would further enhance the scenery. Can you take this into consideration?

Yesterday I watched AI traffic departing runway 25. They are not backtracking (which is OK since it slows down the AI departure/arrival flow), but the aircraft make a large turn into the grass. Can this please be fixed?