Liamr685

Joining in with this topic, Flood & Dome lights don't work in the cockpit with the dials on the centre pedestal. (1.0.11)

Hi all, As per the title, and an issue that started in 1.0.10 for me, that when I enter reverse thrust, I only get max reverse or nothing, it will not follow the throttle position between idle and max rev. It’s the same when using the key bindings, max rev or none, the throttle doesn’t follow the blue dot target.

Macco Sim is working on a V2 of their scenery for MAN, so will likely include all the recent development with the second pier .

7 hours into MAN-LAS, check the sim, all looks good, check Volanta and my jets turned 90 degrees from the flight plan and is heading south. Back in the sim, disconnect AP, entire cockpit freezes. Had years of no issues in P3D, went off simming for a while, returned to the hobby and dealing with this with the ini a350. This can’t be system specific, as it’s evident across the board. Hope one day we get a final fix for this, because this is disheartening to say the least.

As you can see below, despite navigraph selected in OIS, the FMS has no database, which is why it isnt letting me enter data, I have to restart the sim for it to work correctly. Come on INI, whats going on?

Sounds similar to the issues I’m having here; I can’t import the flight plan / load it in, and trying to enter the departure & arrival airports in the fms is 50/50 whether it works, or not.

Glad I’m not the only one experiencing this. ive stopped flying the 350 at the moment due to the hit or miss ability to enter to departure & arrival airport into the FMS. Even after clearing the WASM. gets frustrating having to reboot the sim a couple of times before the aircraft allows me to enter the data. no issues with other addons.

2505r1 from Navigraph. it doesn’t matter where I am, as soon as I try entering the dep/arr airport in INIT, once I hit enter, they vanish. i can enter the flight number just fine, and req company route…but when I try to select the company route, that also fails to enter. i have to reboot the sim a couple of times before it works. fS20 did have a small sub 100mb update about a day or so ago too, not sure if that’s linked.

I cleared the WASM after updating to 1.0.10, but not after subscribing to Navigraph, then selecting Navigraph nav data in the OIS. the only other addon I bought was GSX Pro, about 3 days before subscribing to Navigraph. So not sure if GSX could be a potential culprit?

As per the title, its now hit or miss whether i can enter the departure or arrival airport in the init page when setting up a flight. I can type the data in, but when i hit 'enter', the airport codes just vanish. Not sure if this is to do with the latest airac cycle from navigraph, or the ffact its the first instance where ive told the A350 to use navigraph data, after subscribing to navigraph for the first time in years, after initially using this aircraft with the default sim airac.

Evening all. 2 issues I've noticed with the latest version of the A350, wondering if anyone else has too... 1) When selecting reverse, it automatically applies max reverse, I cant just active the reverser and have idle reverse. Its max reverse or nothing. (Pressing F1 my key bind to idle the throttle, then holding F2 to advance the throttle further into the reverse does nothing, i press F1 and it jumps into max reverse...i press F2, it also jumps into max reverse...Pressing F1 again to idle the engine, causes it to stay in max reverse. Only way out is to advance my throttle on my joystick) 2) T/O Config...pressing the button doesn't change the message from blue to green on the display. Neither of these issues were present in 1.0.8 (i didn't get chance to fly in 1.0.9)